RAK 811 tracker need some help please

[88bit]

Hi I have a RAK 811 Tracker board and trying to make it work. I’m using the RAK (somewhat) documented method. I have a Segger Jlink working and can program the board, however I’m stuggling with what exactly and how it has to be updated. I would appreciate if some one could help. Maybe someone has a commented main.h file explaining what needs to be changed a where including what is big and little endian.

Regards

[BoRRoZ]

see you’ve found the right topic here

Rak811 Tracker Board

You mentioned you maybe able to provide some “how to lab file” I have my board hooked up via the recommended CooCox setup and able to compile the file successfully and copy it via the Segger Jlink to the board. However I must be missing some values in the main.h as I can not make it work. The hardware looks good but support is very limited. Can you help? maybe you have a main.h file you can comment on the values which have to be changed. I’m new to this and it has been a real challenge.