# about setting up a gateway using 8 Channel LoRa Gateway Kit with LoRa HAT and GPS from Adafruit

> I configured and registered my gateway. But I could see it on the map of this network. And I try to connnect with the gateway from NUCLEO-WL55JC1 MCU board from

- Type: Community update
- Community: [The Things Network Minneapolis](https://www.thethingsnetwork.org/community/minneapolis/)
- Author: nannan
- Published: 2023-06-05
- Web page: https://www.thethingsnetwork.org/community/minneapolis/post/about-setting-up-a-gateway-using-8-channel-lora-gateway-kit-with-lora-hat-and-gps-from-adafruit

I configured and registered my gateway. But I could see it on the map of this network. And I try to connnect with the gateway from NUCLEO-WL55JC1 MCU board from STM32 Microelectronics. I wonder how I could check if my gateway has been set up correctly. Then, I could debug what the problem is. Many thanks.

![file](https://www.thethingsnetwork.org/media/md_editor/image-1685984470507.large.png)