# DIY Arduino Uno GPS Tracker

> TTN LoRaWAN GPS Tracker based on Uno with Neo-M6 GPS Modul and RFM95 Hardware: • Arduino Uno R3 • RFM95 LoRa transceiver module Rev 1.2 Frequency 868MHz • RFM95

- Type: Community update
- Community: [The Things Network Ochsenhausen](https://www.thethingsnetwork.org/community/ochsenhausen/)
- Author: Robert Ries
- Published: 2018-12-17
- Web page: https://www.thethingsnetwork.org/community/ochsenhausen/post/diyf-arduino-uno-gps-tracker

**TTN LoRaWAN GPS Tracker based on Uno with Neo-M6 GPS Modul and RFM95**

Hardware:
• Arduino Uno R3
• RFM95 LoRa transceiver module Rev 1.2 Frequency 868MHz
• RFM95 antenna lenght 86 mm (f = 868 MHz) connected on pin “ANA”
(Insulated stranded copper, conductor diameter = 0.254 mm)
• GPS Modul Neo-6M-0-001 (GY-GPS6MV2) with GPS antenna

Robert