# RisingHF RHF0M301 - Raspberry Pi Gateway

> Dear all, There was an unexpected problem on the custom clearance process which caused a lengthy delay. Anyway, the parts have finally arrived. I put all of the

- Type: Community update
- Community: [The Things Network Surabaya](https://www.thethingsnetwork.org/community/surabaya/)
- Author: Atar Babgei
- Published: 2017-07-20
- Web page: https://www.thethingsnetwork.org/community/surabaya/post/risinghf-rhf0m301-raspberry-pi-gateway

Dear all,

There was an unexpected problem on the custom clearance process which caused a lengthy delay.

Anyway, the parts have finally arrived. I put all of them together and managed to get the gateway up and running.

**Parts**

Since Indonesia is currently using 923-925MHz frequency plan then we need to find a gateway and antenna that operates in those frequency channels.

Here's the main parts used for this gateway:
- Raspberry Pi 3 Model B
- [RisingHF RHF0301 - 920 - LoRa gateway](http://www.risinghf.com/product/rhf0m301/?lang=en)
- [Antenna 900MHz 6dBi Omni](http://store.rfdesign.com.au/antenna-900mhz-6dbi-omni-n/)

**Putting all together**

I managed to build a simple backplane (Eagle CAD) for the Raspberry Pi that I put in TTN Surabaya github page: [github.com/ttn-surabaya/RHF0M301-Pi-Adapter](https://github.com/ttn-surabaya/RHF0M301-Pi-Adapter)

Also, You can find the wiring configuration and a simple explanation of how to build the gateway there.

**Current Status**

Please notice that this gateway is currently under test, so you might not see the gateway on the map all the time. I am planning to put this gateway outside once I found a good and high place in Surabaya. Any suggestions are welcome and appreciated.