
SLG-I3 Parking Sensor
Cicicom's LoRaWAN smart parking sensor SL-G-I3 accurately detects parking events, by utilizing cutting-edge triple detection technology (magnetic sensor, motion sensor, radar). All sensors and algorithms are tuned and optimized for ultra-low power consumption, providing continuous vehicle detection with higher than 99% accuracy and resulting to complete monitoring and management of parking spots.
About this device
Cicicom's LoRaWAN smart parking sensor SL-G-I3 accurately detects parking events, by utilizing cutting-edge triple detection technology (magnetic sensor, motion sensor, radar). All sensors and algorithms are tuned and optimized for ultra-low power consumption, providing continuous vehicle detection with higher than 99% accuracy and resulting to complete monitoring and management of parking spots.
The SLG-I3 Parking Sensor supports 1 regional frequency plan and operates as a Class A LoRaWAN device.
Key features
- Sensors: radar, magnetometer.
- LoRa Alliance certified, verified interoperability with The Things Stack and other LoRaWAN network servers.
- 1 frequency plan supported: EU863-870.
- Battery powered (3.6V Lithium), user replaceable.
Vendor
Hardware specifications
| Model ID | s-lg-i3 |
| IP rating | IP68 |
| Power | Battery — 3.6V Lithium, replaceable |
Sensors & capabilities
Certifications & compliance
Standards
Network profiles
Capabilities are defined per firmware version and frequency plan, exactly as published in the repository.
Firmware V1.4.0
| Frequency plan | MAC | Reg. params | Class | Join | Max EIRP | Certified |
| EU863-870 | 1.0.2 | RP001-1.0.2-RevB | A | OTAA | 16 dBm | ✓ Yes |
Frequency plan coverage
Add to The Things Stack
Manual setup
Create an application
In The Things Stack console, go to Applications → Create application and pick a unique application ID.
Register an end device
Choose From the LoRaWAN Device Repository and search for “SLG-I3 Parking Sensor”. Select your firmware version and frequency plan.
Enter device credentials
Provide the DevEUI, JoinEUI and AppKey printed on the device label or QR code.
Power on & verify uplinks
Within a few minutes you'll see the join request and uplinks in the Live data tab.