nke WATTECO
24 devices by nke WATTECO in the Device Repository for LoRaWAN®.
No devices match
Try broadening your search.
✓ CERTAtm'O - Temperature/Humidity/Atmospheric Pressure
The nke WATTECO Atm’O has sensors for measuring temperature, relative humidity, and atmospheric pressure in …
✓ CERTBob Assistant - Vibration Sensor
BoB Assistant is a low power LoRaWAN compatible vibration sensor for indoor and outdoor predictive maintenance …
✓ CERTCels'O - Temperature Sensor
The Cels’O sensor measures the ambient temperature as well as the temperature of sensitive products in order …
✓ CERTFlash'O - Smart Metering
The nke WATTECO LoRaWAN® Flash’O has a pulse sensor for counting the number of light pulses emitted by any …
✓ CERTHumid'O - Liquid Sensor Probe
The nke WATTECO LoRaWAN® Humid’O Sensor has a liquid sensor probe for detecting water in places like boiler …
✓ CERTIn'O - I/O Interface
The nke WATTECO In’O includes optocoupled 10 inputs and 4 outputs. It turns any type of I/O sensor/actuator …
✓ CERTIntens'O - Current Meter
The nke WATTECO Intens’O sensor measures the intensity of electric current using its clamp-on ammeter and …
✓ CERTLev'O+ - Pressure Sensor Probe
The nke WATTECO LoRaWAN® Lev’O+ has a pressure sensor probe for measuring liquid (water, fuel, oil, …
✓ CERTModbus classe A - Modbus Interface
The ModBus/LoRaWAN® Bridge collects data from any ModBus RTU existing equipment and connects these devices to …
✓ CERTModbus classe C - Modbus Interface
The ModBus/LoRaWAN® Bridge collects data from any ModBus RTU existing equipment and connects these devices to …
✓ CERTPress'O - Analog Interface
The nke WATTECO Press'O sensor turns any 0-10V, 4-20mA analog gauge into a Class A sensor connected to a …
✓ CERTPulse Sens'O - Smart Meter Interface
The nke WATTECO Pulse Sens’O consists of a pulse sensor (counter) for remotely reading metering data from …
✓ CERTPulse Sens'O AtEx Zone 1 - Smart Meter Interface
The nke WATTECO LoRaWAN® Pulse Sens'O AtEx Zone 1 has a pulse sensor for reading meter data from water, gas …
✓ CERTRemote Temperature 2 CTN
The nke WATTECO Remote Temperature 2 CTN allows connecting 2 temperature sensor probes for measuring …
✓ CERTRemote temperature sensor
The nke WATTECO Remote temperature sensor is dedicated to connecting a temperature sensor probe for measuring …
✓ CERTSkydome - Window Position Sensor
The nke WATTECO Skydome has an onboard accelerometer for detecting the change of position to verify that a …
✓ CERTSmart Plug
The nke WATTECO Smart Plug sensor supports remotely manage the operation and consumption of common household …
✓ CERTTemperature Indoor Sensor
The nke WATTECO temperature indoor sensor measures indoor ambient temperature and transmits data over the …
✓ CERTTH - Temperature & Humidity Sensor
The nke WATTECO TH sensor measures indoor ambient temperature and humidity in buildings, apartments, and …
✓ CERTToran'O AtEx Zone 1 - I/O Interface
The nke WATTECO Toran’O AtEx Zone 1 sensor is used to report status changes, pulse count values, and analog …
✓ CERTTriphas'O - Energy Consumption Interface
The Triphas’O sensor is used to remotely read the electrical energy consumption of a three-phase installation …
✓ CERTVaqa'O - Temp/Hum/VOC/CO2 SensorTemp/Hum/VOC/CO2 Sensor
The nke WATTECO Vaqa’O sensor is a LoRaWAN® device that measures the temperature, relative humidity, …
✓ CERTVaqa'O+Plus - Temp/Hum/VOC/CO2/Motion Sensor
The nke WATTECO Vaqa’O+ has sensors for measuring temperature, relative humidity, atmospheric pressure, the …
✓ CERTVentil'O - Pressure & Temperature Sensor
The nke WATTECO Ventil'O has sensors for measuring pressure and temperature in vacuums established by outdoor …