Sani Sensor 2 - Healthcare Monitor
Plug-and-play sensor that capture workflow data. No wiring is required.
About this device
Plug-and-play sensor that capture workflow data. No wiring is required.
The Sani Sensor 2 - Healthcare Monitor supports 1 regional frequency plan and operates as a Class A LoRaWAN device.
Key features
- 1 frequency plan supported: EU863-870.
- Battery powered (AA), user replaceable.
Vendor
Hardware specifications
| Model ID | sanisensor2 |
| Power | Battery — AA, replaceable |
Sensors & capabilities
No sensors listed for this device.
Certifications & compliance
Standards
Network profiles
Capabilities are defined per firmware version and frequency plan, exactly as published in the repository.
Firmware 2.30.10
| Frequency plan | MAC | Reg. params | Class | Join | Max EIRP | Certified |
| EU863-870 | 1.0.2 | RP001-1.0.2-RevB | A | OTAA | 16 dBm | — |
Frequency plan coverage
Add to The Things Stack
Manual setup
Create an application
In The Things Stack console, go to Applications → Create application and pick a unique application ID.
Register an end device
Choose From the LoRaWAN Device Repository and search for “Sani Sensor 2 - Healthcare Monitor”. Select your firmware version and frequency plan.
Enter device credentials
Provide the DevEUI, JoinEUI and AppKey printed on the device label or QR code.
Power on & verify uplinks
Within a few minutes you'll see the join request and uplinks in the Live data tab.