Atm'O - Temperature/Humidity/Atmospheric Pressure
The WATTECO Atm’O has sensors for measuring temperature, relative humidity, and atmospheric pressure …
Bob Assistant - Vibration Sensor
BoB Assistant is a low power LoRaWAN compatible vibration sensor for indoor and outdoor predictive …
Clim'O - Indoor Temperature/Humidity
The WATECO Clim'O sensor measures indoor ambient temperature and humidity in buildings, apartments, …
Clos'O - Contact Sensor
The Clos’O sensor is used to ensure an access gate is properly closed. Attached to the frame (or the …
Flash'O - Smart Metering
The WATTECO LoRaWAN® Flash’O has a pulse sensor for counting the number of light pulses emitted by …
Hygro Temp'O - Indoor Temperature/Humidity
The WATECO Hygro Temp'O sensor measures indoor ambient temperature and humidity in buildings, …
Hygro Temp'O remote - Indoor remote Temperature/Humidity
The WATECO Hygro Temp'o remote measures temperature and humidity with a remote probe (IP68/IP67). It …
In'O - I/O Interface
The WATTECO In’O includes optocoupled 10 inputs and 4 outputs. It turns any type of I/O …
Inclino - Vertical angle measurement Sensor
The WATTECO Inclino features an onboard accelerometer that detects changes in position. For example, …
Intens'O - Current Meter
The WATTECO Intens’O sensor measures the intensity of electric current using its clamp-on ammeter …
Lev'O+ - Pressure Sensor Probe
The WATTECO LoRaWAN® Lev’O+ has a pressure sensor probe for measuring liquid (water, fuel, oil, …
Modbus classe A - Modbus Interface
The ModBus/LoRaWAN® Bridge collects data from any ModBus RTU existing equipment and connects these …
Modbus classe C - Modbus Interface
The ModBus/LoRaWAN® Bridge collects data from any ModBus RTU existing equipment and connects these …
Monit'O - Analog Interface
The WATTECO Monit'O offers 2 analog inputs isolated from each other allowing the measurement of …
Move'O - Temperature, Humidity, Occupancy & Luminosity Sensor
The Watteco MOVE’O has 4 sensors. Passive infrared (PIR), temperature T°C, humidity Hr% and …
Move'O Lite - Temperature, Humidity, Occupancy & Luminosity Sensor
The Watteco MOVE'O Lite has 4 sensors. Passive infrared (PIR), temperature T°C, humidity Hr% and …
Press'O - Analog Interface
The WATTECO Press'O sensor turns any 0-10V, 4-20mA analog gauge into a Class A sensor connected to a …
Pulse Sens'O - Smart Meter Interface
The WATTECO Pulse Sens’O consists of a pulse sensor (counter) for remotely reading metering data …
Pulse Sens'O AtEx Zone 1 - Smart Meter Interface
The WATTECO LoRaWAN® Pulse Sens'O AtEx Zone 1 has a pulse sensor for reading meter data from water, …
Smart Plug
The WATTECO Smart Plug sensor supports remotely manage the operation and consumption of common …
SmartPilot-Wire
The WATTECO The SmartPilot Wire is a Class C LoRaWAN® actuator that monitors and controls up to 6 …
Temp'O - Indoor Temperature
The WATECO Temp'O sensor measures indoor ambient temperature in buildings, apartments, and houses. …
Temp'O - Outdoor temperature sensor
The WATTECO Temp'O outdoor Temperature sensor measures the outside temperature of buildings and the …
Temp'O remote 1 probe sensor
The WATTECO Remote temperature sensor is dedicated to connecting a temperature sensor probe for …
Temp'O remote 2 probes sensor
The WATTECO Remote Temperature 2 CTN allows connecting 2 temperature sensor probes for measuring …
Temperature Indoor Sensor
The WATTECO Indoor temperature sensor measures indoor ambient temperature and transmits data over …
TH - Temperature & Humidity Indoor Sensor
This WATTECO sensor measures indoor ambient temperature and humidity in buildings, apartments, and …
Tics'O -
Le capteur TICS’O permet le transfert de données issues de la sortie TIC des compteurs électriques …
Toran'O AtEx Zone 1 - I/O Interface
The WATTECO Toran’O AtEx Zone 1 sensor is used to report status changes, pulse count values, and …
Triphas'O - Energy Consumption Interface
The Triphas’O sensor is used to remotely read the electrical energy consumption of a three-phase …
Vaqa'O - Temp/Hum/VOC/CO2 Sensor
The WATTECO Vaqa’O sensor is a LoRaWAN® device that measures the temperature, relative humidity, and …
Vaqa'O Lite - Temp/Hum/CO2 Sensor
The WATTECO Vaqa’O Lite sensor is a LoRaWAN® device that measures the temperature, relative …
Vaqa'O Multi Lite - Temperature, Humidity, Luminosity, Atmospheric Pressure, IAQ, CO2 & motion sensor
The Watteco VAQA’O Multi Lite is a LoRaWAN® device that measures Temp/Hum/AtmP/IAQ/CO2/Lum/Motion …
Vaqa'O Multi Lite - Temperature, Humidity, Luminosity, CO2 & motion sensor
The Watteco VAQA’O Multi Lite is a LoRaWAN® device that measures Temp/Hum/CO2/Lum/Motion Sensor in …
Vaqa'O+Plus - Temp/Hum/VOC/IAQ/CO2/Motion Sensor
The WATTECO Vaqa’O+ has sensors for measuring temperature, relative humidity, atmospheric pressure, …
Ventil'O - Pressure & Temperature Sensor
The WATTECO Ventil'O has sensors for measuring pressure and temperature in vacuums established by …
