# Raspberry Pi Gateways **URL:** https://www.thethingsnetwork.org/forum/c/gateways/raspberry-gateways/74.md?page=2 [Latest](https://www.thethingsnetwork.org/forum/latest.md) · [Categories](https://www.thethingsnetwork.org/forum/categories.md) · [Tags](https://www.thethingsnetwork.org/forum/tags.md) **Page:** 3 --- ## [TTN only receive application data once](https://www.thethingsnetwork.org/forum/t/ttn-only-receive-application-data-once/42624)
**Author:** [@Wong\_Cheah](https://www.thethingsnetwork.org/forum/u/Wong_Cheah)\ **Replies:** 13\ **Last updated:** [December 28, 2021, 2:34pm UTC](https://www.thethingsnetwork.org/forum/t/ttn-only-receive-application-data-once/42624 "2021-12-28T14:34:29Z")
Hi, I’m new to TTN. I tried to create a LoRa Node ( Cytron LoRa-RFM Shield & CT-UNO) and setup LoRa gateway(Cytron Lora Gateway Raspberry Pi Hat 915Mhz HAT-LRGW-915). I follow this link to setup my gateway and it able to… --- ## [Node to close to gateway](https://www.thethingsnetwork.org/forum/t/node-to-close-to-gateway/54007)
**Author:** [@SimonBoonstra](https://www.thethingsnetwork.org/forum/u/SimonBoonstra)\ **Replies:** 9\ **Last updated:** [December 26, 2021, 10:52am UTC](https://www.thethingsnetwork.org/forum/t/node-to-close-to-gateway/54007 "2021-12-26T10:52:03Z")
Hi I have the problem that when I’m in the testing stage that my node is to close to the gateway. This is a follow up to this thread. But as it is already closed, I have to create a new one. As I live in a small flat,… --- ## [Raspberry pi 4 model B + RF95W Adafruit Lora module 433 Mhz](https://www.thethingsnetwork.org/forum/t/raspberry-pi-4-model-b-rf95w-adafruit-lora-module-433-mhz/53401)
**Author:** [@Junaid\_Qadir](https://www.thethingsnetwork.org/forum/u/Junaid_Qadir)\ **Replies:** 1\ **Last updated:** [November 24, 2021, 12:27pm UTC](https://www.thethingsnetwork.org/forum/t/raspberry-pi-4-model-b-rf95w-adafruit-lora-module-433-mhz/53401 "2021-11-24T12:27:42Z")
Hi there, I am trying connecting LoRaWAN Gateway to the TTN v3. The Gateway is based on Raspberry Pi 4 Model B and Adafruit RF95W LoRa module (SX1276). I followed everything properly but still there is some problem in … --- ## [First Gateway Assistance, Please?](https://www.thethingsnetwork.org/forum/t/first-gateway-assistance-please/53299)
**Author:** [@Positronic](https://www.thethingsnetwork.org/forum/u/Positronic)\ **Replies:** 0\ **Last updated:** [November 20, 2021, 11:55am UTC](https://www.thethingsnetwork.org/forum/t/first-gateway-assistance-please/53299 "2021-11-20T11:55:21Z")
So, hopefully you knowledgeable folk can help me out, please? I’ve deployed devices and attached to gateways, but I’ve never built a gateway. Until now… I have a Seeed Studio gateway kit - includes Rasp Pi 3, RHF0M301-… --- ## [RAK833 - TTN packets cropped](https://www.thethingsnetwork.org/forum/t/rak833-ttn-packets-cropped/52975)
**Author:** [@thetaga](https://www.thethingsnetwork.org/forum/u/thetaga)\ **Replies:** 9\ **Last updated:** [November 7, 2021, 8:18pm UTC](https://www.thethingsnetwork.org/forum/t/rak833-ttn-packets-cropped/52975 "2021-11-07T20:18:29Z")
Dear All, I have an end device (Heltec AB02S) sending 20bytes, which is well received by my RAK833-868EU, and the packet forwarder correctly forwards by UDP the lora message towards TTN. I have used TCPdump on my raspb… --- ## [Gateway only forwards packets if connected to mobile data](https://www.thethingsnetwork.org/forum/t/gateway-only-forwards-packets-if-connected-to-mobile-data/52967)
**Author:** [@sampasia](https://www.thethingsnetwork.org/forum/u/sampasia)\ **Replies:** 5\ **Last updated:** [November 7, 2021, 1:29pm UTC](https://www.thethingsnetwork.org/forum/t/gateway-only-forwards-packets-if-connected-to-mobile-data/52967 "2021-11-07T13:29:41Z")
Hello, I have a RAK7246 gateway but it does not send packets if it is connected to my home’s router. I am sure that it is connected to the internet because I was able to ping it from my laptop. However, the nodes won’t c… --- ## [Migrating a RPi IMST iC880A GW to V3; permanent fails](https://www.thethingsnetwork.org/forum/t/migrating-a-rpi-imst-ic880a-gw-to-v3-permanent-fails/52916)
**Author:** [@HaSch](https://www.thethingsnetwork.org/forum/u/HaSch)\ **Replies:** 7\ **Last updated:** [November 4, 2021, 6:00pm UTC](https://www.thethingsnetwork.org/forum/t/migrating-a-rpi-imst-ic880a-gw-to-v3-permanent-fails/52916 "2021-11-04T18:00:44Z")
Hello, I tried to migrate my RPi IMST iC880A GW to TTS V3 but it doesn’t work. I used Balena Cloud with repo of jpmeijers and did all necessary steps as described. “git push -f balena master” produces several errors and… --- ## [Balena Basicstation on Pi - PPS / GPS](https://www.thethingsnetwork.org/forum/t/balena-basicstation-on-pi-pps-gps/52874)
**Author:** [@tkerby](https://www.thethingsnetwork.org/forum/u/tkerby)\ **Replies:** 0\ **Last updated:** [November 3, 2021, 12:08am UTC](https://www.thethingsnetwork.org/forum/t/balena-basicstation-on-pi-pps-gps/52874 "2021-11-03T00:08:58Z")
Has anyone else noticed that setting the GW\_GPS environment variable to true doesn’t seem to do anything such as enable the PPS input. I’m keen to get PPS up and running and a manual edit of the station.conf in the dock… --- ## [Raspberry Pi 3 b+ Dragino PG1301 free uart serial port for enabling GPS](https://www.thethingsnetwork.org/forum/t/raspberry-pi-3-b-dragino-pg1301-free-uart-serial-port-for-enabling-gps/38854)
**Author:** [@Ivan992](https://www.thethingsnetwork.org/forum/u/Ivan992)\ **Replies:** 5\ **Last updated:** [October 31, 2021, 9:34pm UTC](https://www.thethingsnetwork.org/forum/t/raspberry-pi-3-b-dragino-pg1301-free-uart-serial-port-for-enabling-gps/38854 "2021-10-31T21:34:20Z")
I have spent some time investigating how to enable GPS module which I get with LoRa concentrator board Dragino PG1301. I am using Raspberry Pi 3b+ and I know that it has two UART serial ports and GPS should be connected … --- ## [Rpi Gateway prevents nodes from exchanging keys](https://www.thethingsnetwork.org/forum/t/rpi-gateway-prevents-nodes-from-exchanging-keys/52724)
**Author:** [@SimonBoonstra](https://www.thethingsnetwork.org/forum/u/SimonBoonstra)\ **Replies:** 2\ **Last updated:** [October 27, 2021, 10:38pm UTC](https://www.thethingsnetwork.org/forum/t/rpi-gateway-prevents-nodes-from-exchanging-keys/52724 "2021-10-27T22:38:42Z")
Hello I recently started discovering LoRa. I have 2 Adafruit RFM9X LoRa modules. I created an application for each of them in ttn\_v3 and can successfully transmit data from the nodes to ttn\_v3. On the map I see that the… --- ## [Move RPi with balena to V3](https://www.thethingsnetwork.org/forum/t/move-rpi-with-balena-to-v3/44290)
**Author:** [@scidrom](https://www.thethingsnetwork.org/forum/u/scidrom)\ **Replies:** 7\ **Last updated:** [October 26, 2021, 8:25pm UTC](https://www.thethingsnetwork.org/forum/t/move-rpi-with-balena-to-v3/44290 "2021-10-26T20:25:32Z")
Hello, how can I register this gateway to V3: https://console.thethingsnetwork.org/gateways/s54mtb-experimental-gateway What exactly is gateway EUI ? New user interface allow only hex input, but on V2 there is no fiel… --- ## [RAK 2245 HAT + 8 Dbi antenna, unimpressive range](https://www.thethingsnetwork.org/forum/t/rak-2245-hat-8-dbi-antenna-unimpressive-range/50812)
**Author:** [@zachelliottwx](https://www.thethingsnetwork.org/forum/u/zachelliottwx)\ **Replies:** 19\ **Last updated:** [October 14, 2021, 12:32am UTC](https://www.thethingsnetwork.org/forum/t/rak-2245-hat-8-dbi-antenna-unimpressive-range/50812 "2021-10-14T00:32:45Z")
https://i.imgur.com/VqFWibg.jpg(image larger than 4096KB)I have a Pi 4 setup in my basement with the RAK2245 Concentrator HAT. From there I have a UFL to SMA adapter, then 15 ft of LMR400 50 ohm cable, to a lightning ar… --- ## [Raspberry PI4 as Gateway & private TTS Server combined](https://www.thethingsnetwork.org/forum/t/raspberry-pi4-as-gateway-private-tts-server-combined/52132)
**Author:** [@IOT\_Obrist](https://www.thethingsnetwork.org/forum/u/IOT_Obrist)\ **Replies:** 0\ **Last updated:** [October 5, 2021, 12:33pm UTC](https://www.thethingsnetwork.org/forum/t/raspberry-pi4-as-gateway-private-tts-server-combined/52132 "2021-10-05T12:33:35Z")
Hi, For a university project, in the area of FirmwareUpdateOverTheAir with LoraWAN, I would like to create a mobile LoraWAN infrastructure with a Raspberry Pi 4. That means to use the Ri 4 as a mobile server and gateway… --- ## [RAK2287 + RPI4 + BalenaCloud connection issues](https://www.thethingsnetwork.org/forum/t/rak2287-rpi4-balenacloud-connection-issues/50747)
**Author:** [@laurens](https://www.thethingsnetwork.org/forum/u/laurens)\ **Replies:** 11\ **Last updated:** [October 4, 2021, 10:07am UTC](https://www.thethingsnetwork.org/forum/t/rak2287-rpi4-balenacloud-connection-issues/50747 "2021-10-04T10:07:45Z")
I’m facing some issues with getting my RAK2287 & RPI4 to work using Basics Station. I’ve followed the below instructions. Log files are shown at the bottom of this thread. main ERROR: UNKNOWN TX STATUS 0x00 mai… --- ## [Dragino HAT - Raspberry Pi 3](https://www.thethingsnetwork.org/forum/t/dragino-hat-raspberry-pi-3/51812)
**Author:** [@orlandofilhocg](https://www.thethingsnetwork.org/forum/u/orlandofilhocg)\ **Replies:** 2\ **Last updated:** [September 25, 2021, 10:02am UTC](https://www.thethingsnetwork.org/forum/t/dragino-hat-raspberry-pi-3/51812 "2021-09-25T10:02:20Z")
Hello! I have a LoRa GPS HAT DRAGINO, based on the SX1276/SX1278 transceiver. I bought this device on the last week and I followed the DRAGINO instructions for use the Gateway on TTN service. I Followed step by step, but… --- ## [Gateway status is disconnected, despite that all seems ready to work](https://www.thethingsnetwork.org/forum/t/gateway-status-is-disconnected-despite-that-all-seems-ready-to-work/51761)
**Author:** [@xavierets](https://www.thethingsnetwork.org/forum/u/xavierets)\ **Replies:** 2\ **Last updated:** [September 24, 2021, 8:02pm UTC](https://www.thethingsnetwork.org/forum/t/gateway-status-is-disconnected-despite-that-all-seems-ready-to-work/51761 "2021-09-24T20:02:44Z")
I followed all the steps to create my LoRa gateway whith the RAK7243 kit (without lte board) but the gateway do not appear connected on the TTS… However, the gateway has access to internet (i pinged several url), and all… --- ## [Prototype Pi gateway SX1302 issues](https://www.thethingsnetwork.org/forum/t/prototype-pi-gateway-sx1302-issues/41964)
**Author:** [@manuelr](https://www.thethingsnetwork.org/forum/u/manuelr)\ **Replies:** 7\ **Last updated:** [February 24, 2021, 2:16pm UTC](https://www.thethingsnetwork.org/forum/t/prototype-pi-gateway-sx1302-issues/41964 "2021-02-24T14:16:03Z")
--- ## [Gateway V3 integration Problems](https://www.thethingsnetwork.org/forum/t/gateway-v3-integration-problems/51526)
**Author:** [@jazz](https://www.thethingsnetwork.org/forum/u/jazz)\ **Replies:** 5\ **Last updated:** [September 17, 2021, 12:19pm UTC](https://www.thethingsnetwork.org/forum/t/gateway-v3-integration-problems/51526 "2021-09-17T12:19:49Z")
Hello together, i tried to integrate my Gateway in the V3, which earlier was integrated in the V2. I added the Gateway to the new Console and change the global and local Configuration files (New Server Address). Then I… --- ## [How to change the Gateway ID on RAK2245](https://www.thethingsnetwork.org/forum/t/how-to-change-the-gateway-id-on-rak2245/51236)
**Author:** [@fribu](https://www.thethingsnetwork.org/forum/u/fribu)\ **Replies:** 1\ **Last updated:** [September 2, 2021, 3:36pm UTC](https://www.thethingsnetwork.org/forum/t/how-to-change-the-gateway-id-on-rak2245/51236 "2021-09-02T15:36:09Z")
Hi, I am using the RAK2245 as Pi Hat Edition. My problem is, I have 4 gateways to prepare and for some reason 2 of them have the same Gateway ID… Raspberry Pi 4 Model B Rev 1.4, OS "10 (buster)", 4.19.97-v7l+. RAKWire… --- ## [End devices must be reset after problems with v2/v3 broker](https://www.thethingsnetwork.org/forum/t/end-devices-must-be-reset-after-problems-with-v2-v3-broker/51211)
**Author:** [@avdleun](https://www.thethingsnetwork.org/forum/u/avdleun)\ **Replies:** 0\ **Last updated:** [September 1, 2021, 9:15pm UTC](https://www.thethingsnetwork.org/forum/t/end-devices-must-be-reset-after-problems-with-v2-v3-broker/51211 "2021-09-01T21:15:47Z")
Hello everybody. I am running a (outside) Semtech UDP Packet Forwarder gateway on raspberry pi 3B for more then a year without any noticeable problems. Due to the migration from V2 to V3 I have moved my 2 applications … --- ## [RAK831 on Balena - how to migrate to V3](https://www.thethingsnetwork.org/forum/t/rak831-on-balena-how-to-migrate-to-v3/51083)
**Author:** [@Paul\_Stewart](https://www.thethingsnetwork.org/forum/u/Paul_Stewart)\ **Replies:** 0\ **Last updated:** [August 27, 2021, 9:52pm UTC](https://www.thethingsnetwork.org/forum/t/rak831-on-balena-how-to-migrate-to-v3/51083 "2021-08-27T21:52:38Z")
Hi All, Years ago I setup a gateway on Resin.io using this tutorial - https://www.thethingsnetwork.org/docs/gateways/rak831/ I would like to move it over to V3 - thought it would be a simple exercise to jump into the g… --- ## [RAK7248 and BalenaCloud connection issues to TTS Community Edition](https://www.thethingsnetwork.org/forum/t/rak7248-and-balenacloud-connection-issues-to-tts-community-edition/50922)
**Author:** [@Grantep](https://www.thethingsnetwork.org/forum/u/Grantep)\ **Replies:** 2\ **Last updated:** [August 26, 2021, 2:23pm UTC](https://www.thethingsnetwork.org/forum/t/rak7248-and-balenacloud-connection-issues-to-tts-community-edition/50922 "2021-08-26T14:23:33Z")
Hi, Not sure what I am doing wrong but I am having issues connecting my RAK7248 with BalenaOS to the TTS Community Edition. I followed the directions on installing the BalenaOS to the RAK7248 as outlined in The day 2 Th… --- ## [Probably need to rebuild a gateway for V3](https://www.thethingsnetwork.org/forum/t/probably-need-to-rebuild-a-gateway-for-v3/50973)
**Author:** [@AndyG](https://www.thethingsnetwork.org/forum/u/AndyG)\ **Replies:** 1\ **Last updated:** [August 26, 2021, 10:05am UTC](https://www.thethingsnetwork.org/forum/t/probably-need-to-rebuild-a-gateway-for-v3/50973 "2021-08-26T10:05:01Z")
Hi, I need some advice on the best gateway build for V3 to run on a Raspberry Pi 3+ with a rhf0m301 concentrator board from Seed Studio. I’ve had it since 2018. There was some trouble early on with the original gateway… --- ## [Help to connect a rpi+rak2247 gateway to TTN](https://www.thethingsnetwork.org/forum/t/help-to-connect-a-rpi-rak2247-gateway-to-ttn/50594)
**Author:** [@MichaelSoren](https://www.thethingsnetwork.org/forum/u/MichaelSoren)\ **Replies:** 5\ **Last updated:** [August 18, 2021, 7:12pm UTC](https://www.thethingsnetwork.org/forum/t/help-to-connect-a-rpi-rak2247-gateway-to-ttn/50594 "2021-08-18T19:12:55Z")
Hi there - I am trying to connect my RPI 3b RAK2245 gateway to TTN. But I cant get the gateway to connect. I suspect that it is because it is configured to use the old V2 api. If that is the caseI do not know what to… --- ## [Added RAK833 RPi HAT GW to V3 - remains in disconnected status](https://www.thethingsnetwork.org/forum/t/added-rak833-rpi-hat-gw-to-v3-remains-in-disconnected-status/49844)
**Author:** [@HeddaIoT](https://www.thethingsnetwork.org/forum/u/HeddaIoT)\ **Replies:** 28\ **Last updated:** [August 3, 2021, 4:08pm UTC](https://www.thethingsnetwork.org/forum/t/added-rak833-rpi-hat-gw-to-v3-remains-in-disconnected-status/49844 "2021-08-03T16:08:11Z")
Hi, I´m trying to add a RAK833 RPi HAT gateway to V3 (fresh setup, no V2 migration). I have tried to follow your tutorials & troubleshooting but still get “disconnected” status in the console. the GW is connected to in… --- ## [Dragino RS485-LN and gateway](https://www.thethingsnetwork.org/forum/t/dragino-rs485-ln-and-gateway/49851)
**Author:** [@Nill](https://www.thethingsnetwork.org/forum/u/Nill)\ **Replies:** 1\ **Last updated:** [July 17, 2021, 5:28pm UTC](https://www.thethingsnetwork.org/forum/t/dragino-rs485-ln-and-gateway/49851 "2021-07-17T17:28:44Z")
Hi all, I’m trying to develop my first project in LORA, I already have my gateway working and connect to the TTN, and Im now triyng to connect dragino Model RS485-LN. Im seeing the connection in the gateway, but in th… --- ## [Idea/Suggestion: R-Pi Gateway featured with thermometer (and hygrometer)](https://www.thethingsnetwork.org/forum/t/idea-suggestion-r-pi-gateway-featured-with-thermometer-and-hygrometer/49133)
**Author:** [@ELPE](https://www.thethingsnetwork.org/forum/u/ELPE)\ **Replies:** 6\ **Last updated:** [June 27, 2021, 8:30pm UTC](https://www.thethingsnetwork.org/forum/t/idea-suggestion-r-pi-gateway-featured-with-thermometer-and-hygrometer/49133 "2021-06-27T20:30:16Z")
I would like to measure the temperature (and humidity) inside the gateway enclosure. I have thought about DHT11 or DHT22 directly connected to the R-Pi pins (https://tutorials-raspberrypi.com/raspberry-pi-measure-humidit… --- ## [Semtech SX1280Z3DSFGW1 gateway](https://www.thethingsnetwork.org/forum/t/semtech-sx1280z3dsfgw1-gateway/49038)
**Author:** [@Divakar](https://www.thethingsnetwork.org/forum/u/Divakar)\ **Replies:** 6\ **Last updated:** [June 23, 2021, 7:36pm UTC](https://www.thethingsnetwork.org/forum/t/semtech-sx1280z3dsfgw1-gateway/49038 "2021-06-23T19:36:01Z")
hi I am trying to add the semtech SX1280Z3DSFGW1 raspberry pi based gateway to ttn . I have registered but the status shows disconnected. It is 2.4GHz gateway. Can you please help --- ## [Changing Gateway ID on v3](https://www.thethingsnetwork.org/forum/t/changing-gateway-id-on-v3/49029)
**Author:** [@netmonk](https://www.thethingsnetwork.org/forum/u/netmonk)\ **Replies:** 1\ **Last updated:** [June 22, 2021, 7:02pm UTC](https://www.thethingsnetwork.org/forum/t/changing-gateway-id-on-v3/49029 "2021-06-22T19:02:27Z")
Is there a way to change the Gateway-ID on TTN v3 after gateway creation ? I see ttnmapper is looking to have the same id from v2 than for v3 to identify the gateway and place it on the map. when i migrated my gw from … --- ## [Gateway SX 1262](https://www.thethingsnetwork.org/forum/t/gateway-sx-1262/48750)
**Author:** [@Electronia](https://www.thethingsnetwork.org/forum/u/Electronia)\ **Replies:** 8\ **Last updated:** [June 15, 2021, 3:45pm UTC](https://www.thethingsnetwork.org/forum/t/gateway-sx-1262/48750 "2021-06-15T15:45:54Z")
Hello, I would like to get into ttn. I bought 2 ttgo t-beam for the sensors and an SX1262 module for the raspberry (https://www.amazon.fr/Waveshare-Multi-Level-Configuration-Fixed-Point-Transmission/dp/B07VQZ5ZXY) in o… [Previous page](https://www.thethingsnetwork.org/forum/c/gateways/raspberry-gateways/74.md?page=1) [Next page](https://www.thethingsnetwork.org/forum/c/gateways/raspberry-gateways/74.md?page=3)