# Dragino **URL:** https://www.thethingsnetwork.org/forum/c/nodes/dragino/79.md?page=2 [Latest](https://www.thethingsnetwork.org/forum/latest.md) · [Categories](https://www.thethingsnetwork.org/forum/categories.md) · [Tags](https://www.thethingsnetwork.org/forum/tags.md) **Page:** 3 --- ## [Re-join network without pinning a sensor dragino LHT-52](https://www.thethingsnetwork.org/forum/t/re-join-network-without-pinning-a-sensor-dragino-lht-52/61211)
**Author:** [@artv](https://www.thethingsnetwork.org/forum/u/artv)\ **Replies:** 6\ **Last updated:** [January 31, 2023, 2:12pm UTC](https://www.thethingsnetwork.org/forum/t/re-join-network-without-pinning-a-sensor-dragino-lht-52/61211 "2023-01-31T14:12:25Z")
Hello! I have about 100 temp sensors (dragino LHT52) installed in the building and dragino LPS8v2 gateway. Then messages are sent to the Pi where the statistics calculated to help controll the boiler in the building. Rec… --- ## [Dragino RS485-BL Endnode 1-wire payload decoder](https://www.thethingsnetwork.org/forum/t/dragino-rs485-bl-endnode-1-wire-payload-decoder/60948)
**Author:** [@fristle](https://www.thethingsnetwork.org/forum/u/fristle)\ **Replies:** 1\ **Last updated:** [January 16, 2023, 1:28pm UTC](https://www.thethingsnetwork.org/forum/t/dragino-rs485-bl-endnode-1-wire-payload-decoder/60948 "2023-01-16T13:28:15Z")
Sucessfully added a RS485 endnode to TTS. Payload decoder for standard settings is provided by Dragino and working. From HW v1.3 on it supports 1-wire (one wire), e.g. DS18B20 temp sensor. However, the manual does (ap… --- ## [Sensor values BME; Dragino LA66 LoRaWAN Module](https://www.thethingsnetwork.org/forum/t/sensor-values-bme-dragino-la66-lorawan-module/60769)
**Author:** [@pzwaag](https://www.thethingsnetwork.org/forum/u/pzwaag)\ **Replies:** 2\ **Last updated:** [January 4, 2023, 7:49pm UTC](https://www.thethingsnetwork.org/forum/t/sensor-values-bme-dragino-la66-lorawan-module/60769 "2023-01-04T19:49:40Z")
Hello, I am an absolute beginner in Lora. That’s why I propably already have made several stupid mistakes. The idea is to transport sensorreadings every half hour (BME280; temperature, humidity, pressure) to the Things… --- ## [Dragino LSN50 sensor node - problem with Digital Interrupt](https://www.thethingsnetwork.org/forum/t/dragino-lsn50-sensor-node-problem-with-digital-interrupt/38551)
**Author:** [@cvanaalst](https://www.thethingsnetwork.org/forum/u/cvanaalst)\ **Replies:** 6\ **Last updated:** [December 5, 2022, 1:00am UTC](https://www.thethingsnetwork.org/forum/t/dragino-lsn50-sensor-node-problem-with-digital-interrupt/38551 "2022-12-05T01:00:08Z")
Hi, I have a Dragino LSN50 v2 (bought July 2020) connected to the TTN; the DS18B20 temp sensor works correctly, but I am having issues with a door sensor. If I connect the doorsensor as a digital input on VCC and PA12,… --- ## [Dragino LSE01](https://www.thethingsnetwork.org/forum/t/dragino-lse01/60050)
**Author:** [@reivis](https://www.thethingsnetwork.org/forum/u/reivis)\ **Replies:** 7\ **Last updated:** [November 20, 2022, 1:38pm UTC](https://www.thethingsnetwork.org/forum/t/dragino-lse01/60050 "2022-11-20T13:38:22Z")
Hello my friends, I lately bought a Dragino LSE01 and put it in TTN. Everything works fine but the data that is coming out confusing me. As you can see at the picture below is the output for Bat and conduct\_SOIL corre… --- ## [Dragino - LLMS01 LoRaWAN Leaf Moisture Sensor](https://www.thethingsnetwork.org/forum/t/dragino-llms01-lorawan-leaf-moisture-sensor/59810)
**Author:** [@smartvitapp](https://www.thethingsnetwork.org/forum/u/smartvitapp)\ **Replies:** 2\ **Last updated:** [November 14, 2022, 8:13pm UTC](https://www.thethingsnetwork.org/forum/t/dragino-llms01-lorawan-leaf-moisture-sensor/59810 "2022-11-14T20:13:49Z")
I’m writing to ask for help on an issue that I need to resolve urgently. I am using the LLMS01 device (LoRaWAN Leaf Moisture Sensor - Dragino, LLMS01 -- LoRaWAN Leaf Moisture Sensor) and the gateway DLOS8 (Outdoor LoRaW… --- ## [Downlink data msg failure?](https://www.thethingsnetwork.org/forum/t/downlink-data-msg-failure/58195)
**Author:** [@ownergalileo](https://www.thethingsnetwork.org/forum/u/ownergalileo)\ **Replies:** 0\ **Last updated:** [July 28, 2022, 10:49am UTC](https://www.thethingsnetwork.org/forum/t/downlink-data-msg-failure/58195 "2022-07-28T10:49:55Z")
Hi, I am trying to send a Downlink message to Dragino lgt-92 v. 1.6.4 on The Thing Stack Community edition.The message is 0100012C to configure the Trasmit Time Interval at 300s on the device. On TTN I get the message: … --- ## [LGT92 working with TTN V3](https://www.thethingsnetwork.org/forum/t/lgt92-working-with-ttn-v3/57920)
**Author:** [@Duffy6](https://www.thethingsnetwork.org/forum/u/Duffy6)\ **Replies:** 5\ **Last updated:** [July 18, 2022, 9:57am UTC](https://www.thethingsnetwork.org/forum/t/lgt92-working-with-ttn-v3/57920 "2022-07-18T09:57:52Z")
Hi guys, I hve an older LGT92 here with hardware version 1.3 and firmware 1.4 Is it possible to get this device working in TTN V3? I am asking because I do not own a Sat-Link V2. Regards Duffy6 --- ## [LT-33222-L LoRa I/O Controller - Payload decoder and downlink config](https://www.thethingsnetwork.org/forum/t/lt-33222-l-lora-i-o-controller-payload-decoder-and-downlink-config/19177)
**Author:** [@zone11](https://www.thethingsnetwork.org/forum/u/zone11)\ **Replies:** 26\ **Last updated:** [July 16, 2022, 1:26pm UTC](https://www.thethingsnetwork.org/forum/t/lt-33222-l-lora-i-o-controller-payload-decoder-and-downlink-config/19177 "2022-07-16T13:26:56Z")
While working with the LT-33222 I found a wrong configuration in the preconfigured device to receive downlink data. Ensure you set the RX2 data rate to SF9/125 with the AT command “AT+RX2DR=3”. And here is my payload de… --- ## [Dragino LPS8 shows LoraWAN up, but TTN is offline](https://www.thethingsnetwork.org/forum/t/dragino-lps8-shows-lorawan-up-but-ttn-is-offline/57993)
**Author:** [@whickey15](https://www.thethingsnetwork.org/forum/u/whickey15)\ **Replies:** 2\ **Last updated:** [July 14, 2022, 11:06am UTC](https://www.thethingsnetwork.org/forum/t/dragino-lps8-shows-lorawan-up-but-ttn-is-offline/57993 "2022-07-14T11:06:19Z")
Hi All, I noticed my sensors stopped working lately. I used to be on V2. So figured I needed to be on V3(possibly my mistake). Now my Dragio LPS8 is showing LoraWAN is up but TTN is showing offline. I tried a firmware u… --- ## [Dragino LHT65, connect to the "thethingsnetwork", help!](https://www.thethingsnetwork.org/forum/t/dragino-lht65-connect-to-the-thethingsnetwork-help/41200)
**Author:** [@John\_Lion](https://www.thethingsnetwork.org/forum/u/John_Lion)\ **Replies:** 22\ **Last updated:** [July 12, 2022, 6:23am UTC](https://www.thethingsnetwork.org/forum/t/dragino-lht65-connect-to-the-thethingsnetwork-help/41200 "2022-07-12T06:23:05Z")
hello, I am newbie with the Lorawan technology. I bought a dragino LHT 65. I follow the steps to join lorawan network with the user manual: but blocked at the “Step 2”, the device LHT65 do not join automatically th… --- ## [Duplicate identifiers](https://www.thethingsnetwork.org/forum/t/duplicate-identifiers/57838)
**Author:** [@dbellomo](https://www.thethingsnetwork.org/forum/u/dbellomo)\ **Replies:** 1\ **Last updated:** [July 3, 2022, 1:05pm UTC](https://www.thethingsnetwork.org/forum/t/duplicate-identifiers/57838 "2022-07-03T13:05:00Z")
Hi. I try register a new devise and TTN show this error: “duplicate\_identifiers” Any help, please? Thanks --- ## [Lht65 -\> lig16 -\> ttn](https://www.thethingsnetwork.org/forum/t/lht65-lig16-ttn/57495)
**Author:** [@na-am](https://www.thethingsnetwork.org/forum/u/na-am)\ **Replies:** 9\ **Last updated:** [June 13, 2022, 7:54pm UTC](https://www.thethingsnetwork.org/forum/t/lht65-lig16-ttn/57495 "2022-06-13T19:54:16Z")
hi@all i just successfully installed/configured the LHT65 and try to send data via LIG16 to TTN because of no coverage at my location. IF i press the ACT button the data as expected is shown in “live data” in the paylo… --- ## [Problem downlink and communication](https://www.thethingsnetwork.org/forum/t/problem-downlink-and-communication/57493)
**Author:** [@sandraaritium](https://www.thethingsnetwork.org/forum/u/sandraaritium)\ **Replies:** 5\ **Last updated:** [June 13, 2022, 8:24am UTC](https://www.thethingsnetwork.org/forum/t/problem-downlink-and-communication/57493 "2022-06-13T08:24:37Z")
Hi everyone, I have 7 gateways (Multitech Conduit connected by GSM) installed in a hospital and 25 dragino RS485LN converters. The Network Server that I am using is The Things Stack V3 (I have my own instance in the cl… --- ## [LGT-92 longest distances - ground to ground](https://www.thethingsnetwork.org/forum/t/lgt-92-longest-distances-ground-to-ground/31150)
**Author:** [@Zodiac](https://www.thethingsnetwork.org/forum/u/Zodiac)\ **Replies:** 6\ **Last updated:** [June 9, 2022, 10:24pm UTC](https://www.thethingsnetwork.org/forum/t/lgt-92-longest-distances-ground-to-ground/31150 "2022-06-09T22:24:41Z")
Hi, today I was on the Feldberg mountain in south germany 1493m above sealevel for some range tests and mapping with my t-beam. The location is not bad but not suitable for world records… :wink: As the lgt-92 is not a… --- ## [Join accept not forwarded to end device](https://www.thethingsnetwork.org/forum/t/join-accept-not-forwarded-to-end-device/57107)
**Author:** [@PeterTillema](https://www.thethingsnetwork.org/forum/u/PeterTillema)\ **Replies:** 1\ **Last updated:** [May 19, 2022, 8:38pm UTC](https://www.thethingsnetwork.org/forum/t/join-accept-not-forwarded-to-end-device/57107 "2022-05-19T20:38:40Z")
Heya! I installed an LPS8 Dragino gateway in my house and let my end devoice join via that router. However, for whatever reason it does accept the Join Request, but after then nothing happens. I use LMIC node, so it shou… --- ## [Failure to receive packets from my devices on thethingsnetwork application](https://www.thethingsnetwork.org/forum/t/failure-to-receive-packets-from-my-devices-on-thethingsnetwork-application/56565)
**Author:** [@essouabni\_mohammed](https://www.thethingsnetwork.org/forum/u/essouabni_mohammed)\ **Replies:** 1\ **Last updated:** [April 19, 2022, 3:43pm UTC](https://www.thethingsnetwork.org/forum/t/failure-to-receive-packets-from-my-devices-on-thethingsnetwork-application/56565 "2022-04-19T15:43:20Z")
I added a gatway LG02 in THETHINGSNETWORK V3 the status displays connected. but I only receive one packet during the first reset of my dragino LDDS20 device how can i receive packets from my devices?? and I also can’t … --- ## [Help for project - LT-22222 programming](https://www.thethingsnetwork.org/forum/t/help-for-project-lt-22222-programming/56387)
**Author:** [@knollepetz](https://www.thethingsnetwork.org/forum/u/knollepetz)\ **Replies:** 12\ **Last updated:** [April 10, 2022, 1:13pm UTC](https://www.thethingsnetwork.org/forum/t/help-for-project-lt-22222-programming/56387 "2022-04-10T13:13:38Z")
Hello all, I am a beginner and need help to program from Dragino two controller typ LT-22222. The eye position: When an input is switched at controller 1, a relay should be switched at the second controller as long as… --- ## [Dragino lgt-92 v. 1.5.1 Quectel L76-L](https://www.thethingsnetwork.org/forum/t/dragino-lgt-92-v-1-5-1-quectel-l76-l/56316)
**Author:** [@ownergalileo](https://www.thethingsnetwork.org/forum/u/ownergalileo)\ **Replies:** 0\ **Last updated:** [April 6, 2022, 8:26am UTC](https://www.thethingsnetwork.org/forum/t/dragino-lgt-92-v-1-5-1-quectel-l76-l/56316 "2022-04-06T08:26:08Z")
Hi, I am trying to register a new Dragino Lgt-92 v 1.5.1 device, Quectel L76-L but unfortunately The Things Stack does not connect the device. With Dragino LGT-92 v 1.6.0, uBlox I have no problems. Why? Maybe LoRaWAN ne… --- ## [Changing the spread factor](https://www.thethingsnetwork.org/forum/t/changing-the-spread-factor/46987)
**Author:** [@AhmedIsmail](https://www.thethingsnetwork.org/forum/u/AhmedIsmail)\ **Replies:** 21\ **Last updated:** [April 3, 2022, 2:37pm UTC](https://www.thethingsnetwork.org/forum/t/changing-the-spread-factor/46987 "2022-04-03T14:37:35Z")
Hello, i am using a sensor LHT65 and it sends with SF7BW125 and it is not enough for application i want to increase it to SF8. how can i change it. Best regards --- ## [LGT92 1.5.0 L76-L and The Thing Stack Community version](https://www.thethingsnetwork.org/forum/t/lgt92-1-5-0-l76-l-and-the-thing-stack-community-version/56099)
**Author:** [@ownergalileo](https://www.thethingsnetwork.org/forum/u/ownergalileo)\ **Replies:** 5\ **Last updated:** [March 31, 2022, 5:18pm UTC](https://www.thethingsnetwork.org/forum/t/lgt92-1-5-0-l76-l-and-the-thing-stack-community-version/56099 "2022-03-31T17:18:12Z")
Hi everybody, I have a Dragino LGT-92 HW version 1.5.0, L76-L chip. I cannot understand why I am not receiving data on The Thing Stack Community version.I don’t understand which setting to enter for: LoraWAN version R… --- ## [First timer with LGT92 - no activity yet](https://www.thethingsnetwork.org/forum/t/first-timer-with-lgt92-no-activity-yet/55861)
**Author:** [@michaelblight](https://www.thethingsnetwork.org/forum/u/michaelblight)\ **Replies:** 11\ **Last updated:** [March 17, 2022, 1:42pm UTC](https://www.thethingsnetwork.org/forum/t/first-timer-with-lgt92-no-activity-yet/55861 "2022-03-17T13:42:48Z")
Apologies for such a newbie question. I’ve configured my LGT92 device in TTN and triple checked the values, but it is showing “No activity yet” and there’s nothing in the live data beyond “Create end device”. I live in R… --- ## [Cannot get immediate uplinks from LT-22222-L](https://www.thethingsnetwork.org/forum/t/cannot-get-immediate-uplinks-from-lt-22222-l/55597)
**Author:** [@mwspdev1](https://www.thethingsnetwork.org/forum/u/mwspdev1)\ **Replies:** 3\ **Last updated:** [March 7, 2022, 10:15am UTC](https://www.thethingsnetwork.org/forum/t/cannot-get-immediate-uplinks-from-lt-22222-l/55597 "2022-03-07T10:15:38Z")
Hello all, I have a small setup with a Dragino end node (LT-22222-L) and a gateway (LSP8). I can get the end node joined and activated on the TTN CE (V3) without problem. I supposed there will be immediate uplinks whene… --- ## [Dragino LT-22222-l downlink](https://www.thethingsnetwork.org/forum/t/dragino-lt-22222-l-downlink/55574)
**Author:** [@0815](https://www.thethingsnetwork.org/forum/u/0815)\ **Replies:** 7\ **Last updated:** [March 7, 2022, 8:53am UTC](https://www.thethingsnetwork.org/forum/t/dragino-lt-22222-l-downlink/55574 "2022-03-07T08:53:26Z")
Hi, at the moment I’m trying to publish a payload as a downlink to my Dragino LT-22222-l. As mentioned I’m using an Dragino LT-22222-l as a relais for a water pump. The problem I’m having at the moment is that I’m a l… --- ## [Dragino LGT92 in v3 how to start?](https://www.thethingsnetwork.org/forum/t/dragino-lgt92-in-v3-how-to-start/49417)
**Author:** [@Automatisering](https://www.thethingsnetwork.org/forum/u/Automatisering)\ **Replies:** 41\ **Last updated:** [February 12, 2022, 3:02pm UTC](https://www.thethingsnetwork.org/forum/t/dragino-lgt92-in-v3-how-to-start/49417 "2022-02-12T15:02:41Z")
Hi everybody, I’m new to TTN and got stuck. I started this new topic, because I could get any further with the old post, they are about v2 TTN and in v3 TTN everyhing seems to be different. I have added an application,… --- ## [LGT92 Decoder Issue](https://www.thethingsnetwork.org/forum/t/lgt92-decoder-issue/54804)
**Author:** [@HB9IIU](https://www.thethingsnetwork.org/forum/u/HB9IIU)\ **Replies:** 23\ **Last updated:** [February 10, 2022, 11:49am UTC](https://www.thethingsnetwork.org/forum/t/lgt92-decoder-issue/54804 "2022-02-10T11:49:58Z")
hello, could someone send me a copy&paste of a decoder for the LGT92 that works. I tried many things during several days, but I always get a 0 for the longitude. Firmeware installed is the V 1.6.7 Thank you --- ## [Dragino LSN50 help](https://www.thethingsnetwork.org/forum/t/dragino-lsn50-help/38023)
**Author:** [@CoeB](https://www.thethingsnetwork.org/forum/u/CoeB)\ **Replies:** 49\ **Last updated:** [February 8, 2022, 6:21pm UTC](https://www.thethingsnetwork.org/forum/t/dragino-lsn50-help/38023 "2022-02-08T18:21:10Z")
I’m currently trying to use a DS18B20 Temperature node with a dragino LSN50, but I’m a bit unsure where to go from here. I’ve got the temp node wired up properly and I have hooked up the node to my PC and gotten it’s Dev… --- ## [LSN50V2 Downlink](https://www.thethingsnetwork.org/forum/t/lsn50v2-downlink/55067)
**Author:** [@ueba3ba](https://www.thethingsnetwork.org/forum/u/ueba3ba)\ **Replies:** 1\ **Last updated:** [February 8, 2022, 6:15pm UTC](https://www.thethingsnetwork.org/forum/t/lsn50v2-downlink/55067 "2022-02-08T18:15:47Z")
Hello, I have started to deal with the TTN. I have a LSN50V2. The LSN50v2: When I send a downlink, it is not processed until the Device send an uplink. Is it possible that when I send a downlink to the device, it is … --- ## [LoRa Transmission Distance](https://www.thethingsnetwork.org/forum/t/lora-transmission-distance/50000)
**Author:** [@V\_Hung](https://www.thethingsnetwork.org/forum/u/V_Hung)\ **Replies:** 6\ **Last updated:** [February 3, 2022, 12:16pm UTC](https://www.thethingsnetwork.org/forum/t/lora-transmission-distance/50000 "2022-02-03T12:16:15Z")
Good day! Would like to consults is there any setting for signal boost up? I am new to LoRaWAN and I bought a set of equipment for test, Robustel R3000LG as gateway and 2 Dragino sensor. However, i only able to detect t… --- ## [LGT 92 from v2 to v3 update problems](https://www.thethingsnetwork.org/forum/t/lgt-92-from-v2-to-v3-update-problems/54915)
**Author:** [@Cpt\_Holzschnauz](https://www.thethingsnetwork.org/forum/u/Cpt_Holzschnauz)\ **Replies:** 2\ **Last updated:** [February 2, 2022, 5:47pm UTC](https://www.thethingsnetwork.org/forum/t/lgt-92-from-v2-to-v3-update-problems/54915 "2022-02-02T17:47:49Z")
Hi there I had to upgrade from ttn2 to ttn3 and while setup the device (Firmware 1.5) i had to choose the LoRaWan Version (MAC). I didn’t find that in the specs and i used 1.0. Now the MAC payload is as en example 000… [Previous page](https://www.thethingsnetwork.org/forum/c/nodes/dragino/79.md?page=1) [Next page](https://www.thethingsnetwork.org/forum/c/nodes/dragino/79.md?page=3)