# Dragino

**URL:** https://www.thethingsnetwork.org/forum/c/nodes/dragino/79.md?page=3

[Latest](https://www.thethingsnetwork.org/forum/latest.md) · [Categories](https://www.thethingsnetwork.org/forum/categories.md) · [Tags](https://www.thethingsnetwork.org/forum/tags.md)

**Page:** 4

---

## [Arduino Mega R3 with Dragino LoRa Shiel 1.4 no JoinAccept with OTAA](https://www.thethingsnetwork.org/forum/t/arduino-mega-r3-with-dragino-lora-shiel-1-4-no-joinaccept-with-otaa/54137)

<div class="topic-metadata">

**Author:** [@Tomgisel](https://www.thethingsnetwork.org/forum/u/Tomgisel)\
**Replies:** 12\
**Last updated:** [February 1, 2022, 5:22pm UTC](https://www.thethingsnetwork.org/forum/t/arduino-mega-r3-with-dragino-lora-shiel-1-4-no-joinaccept-with-otaa/54137 "2022-02-01T17:22:40Z")

</div>

Hello! My HW: Arduino (RobotDyn) Mega R3 2560 LoRa Hat: Dragino LoRa Shield V1.4 Arduino IDE 1.8.19 My SW: Arduino IDE → Example → MCCI LoRaWAN Lmic library → ttn-otaa APPEUI\[8\]= 0000000000000000 TTN Settings Freq…

---

## [This newbie can't connect Dragino LGT92 device](https://www.thethingsnetwork.org/forum/t/this-newbie-cant-connect-dragino-lgt92-device/51082)

<div class="topic-metadata">

**Author:** [@brailove](https://www.thethingsnetwork.org/forum/u/brailove)\
**Replies:** 4\
**Last updated:** [January 28, 2022, 1:55pm UTC](https://www.thethingsnetwork.org/forum/t/this-newbie-cant-connect-dragino-lgt92-device/51082 "2022-01-28T13:55:29Z")

</div>

Hi - sorry if this question is similar to others. I am stuck at zero. I created a new application and added an end-device: the Dragino LGT92 GPS tracker. It was charged and ON. The package did not include any info on…

---

## [Data in Gateway but not on Application console](https://www.thethingsnetwork.org/forum/t/data-in-gateway-but-not-on-application-console/54262)

<div class="topic-metadata">

**Author:** [@npl](https://www.thethingsnetwork.org/forum/u/npl)\
**Replies:** 9\
**Last updated:** [January 12, 2022, 9:19am UTC](https://www.thethingsnetwork.org/forum/t/data-in-gateway-but-not-on-application-console/54262 "2022-01-12T09:19:31Z")

</div>

We use the gateway of dragino . we need to use the frequency AS923 with web THE THINGS NETWORK. We already sent data to the things network and it receives in LIVE DATA of gateway. we don’t understand. Why ?. We don’t rec…

---

## [Receiving no data with lgt92-aa](https://www.thethingsnetwork.org/forum/t/receiving-no-data-with-lgt92-aa/54374)

<div class="topic-metadata">

**Author:** [@mrengineer](https://www.thethingsnetwork.org/forum/u/mrengineer)\
**Replies:** 1\
**Last updated:** [January 10, 2022, 10:42am UTC](https://www.thethingsnetwork.org/forum/t/receiving-no-data-with-lgt92-aa/54374 "2022-01-10T10:42:42Z")

</div>

mrengineer 23m hallo, i have bought a lgt92-aa. i can get “join request” and “forward join-accept” message from ttn, but i can’t get any data. i followed the user manuel of the product but don’t understand why i can…

---

## [Dragino LT2222 device uplink payload formatter](https://www.thethingsnetwork.org/forum/t/dragino-lt2222-device-uplink-payload-formatter/54287)

<div class="topic-metadata">

**Author:** [@MotionTronic](https://www.thethingsnetwork.org/forum/u/MotionTronic)\
**Replies:** 4\
**Last updated:** [January 6, 2022, 3:59pm UTC](https://www.thethingsnetwork.org/forum/t/dragino-lt2222-device-uplink-payload-formatter/54287 "2022-01-06T15:59:56Z")

</div>

Hi, Has anyone worked with uplink code for this device? i have the downlink working with the example in git so that’s fine , but i cant seem to find any uplink code example? i am using ubidots with TTN." any guidance w…

---

## [Lgt92 V3 Stack Uplink decoder repository longitude always 0](https://www.thethingsnetwork.org/forum/t/lgt92-v3-stack-uplink-decoder-repository-longitude-always-0/51658)

<div class="topic-metadata">

**Author:** [@hansju22](https://www.thethingsnetwork.org/forum/u/hansju22)\
**Replies:** 5\
**Last updated:** [December 29, 2021, 1:00pm UTC](https://www.thethingsnetwork.org/forum/t/lgt92-v3-stack-uplink-decoder-repository-longitude-always-0/51658 "2021-12-29T13:00:22Z")

</div>

Hello I moved from V2 to V3 (delete the application in V2 and create a new one in V3) Now I choose uplink decoder from repository. I got always longitude = 0. If I look at the device in debug mode, I got a right value. …

---

## [I need help in my project](https://www.thethingsnetwork.org/forum/t/i-need-help-in-my-project/54011)

<div class="topic-metadata">

**Author:** [@lorawan2001](https://www.thethingsnetwork.org/forum/u/lorawan2001)\
**Replies:** 9\
**Last updated:** [December 27, 2021, 3:35pm UTC](https://www.thethingsnetwork.org/forum/t/i-need-help-in-my-project/54011 "2021-12-27T15:35:13Z")

</div>

Hi, i’m a bigenner and i was asked to creat a project using the gateway dragino dlos8 and dragino lorawan I/O controller LT-22222-L . i already connected the both of them in ttn but i dont know how i can programme the l…

---

## [LGT-92 and ST-Link V2 USB - can't set up connection to send AT commands](https://www.thethingsnetwork.org/forum/t/lgt-92-and-st-link-v2-usb-cant-set-up-connection-to-send-at-commands/53145)

<div class="topic-metadata">

**Author:** [@michmal](https://www.thethingsnetwork.org/forum/u/michmal)\
**Replies:** 1\
**Last updated:** [December 20, 2021, 5:22pm UTC](https://www.thethingsnetwork.org/forum/t/lgt-92-and-st-link-v2-usb-cant-set-up-connection-to-send-at-commands/53145 "2021-12-20T17:22:20Z")

</div>

Hello everyone! I’m doing IoT project for my thesis and I bought two LGT-92 trackers. Unfortunately, I can’t update firmware and send AT commands because of the problem with ST-Link V2 connection. I have recent drivers …

---

## [LGT-92 GPS Modul](https://www.thethingsnetwork.org/forum/t/lgt-92-gps-modul/53981)

<div class="topic-metadata">

**Author:** [@thomasdr](https://www.thethingsnetwork.org/forum/u/thomasdr)\
**Replies:** 0\
**Last updated:** [December 19, 2021, 4:33pm UTC](https://www.thethingsnetwork.org/forum/t/lgt-92-gps-modul/53981 "2021-12-19T16:33:20Z")

</div>

Hello, I bought the LGT-92 and noticed that different GPS modules are installed. Mine has the Ublox-Max7. But there are also some with L70, L76, or Ublox-Max8. Is the Ublox-Max7 better than the L76? The L76 can recei…

---

## [Dragino LDDS75 returns "No Sensor"](https://www.thethingsnetwork.org/forum/t/dragino-ldds75-returns-no-sensor/53956)

<div class="topic-metadata">

**Author:** [@benefit](https://www.thethingsnetwork.org/forum/u/benefit)\
**Replies:** 5\
**Last updated:** [December 18, 2021, 10:08pm UTC](https://www.thethingsnetwork.org/forum/t/dragino-ldds75-returns-no-sensor/53956 "2021-12-18T22:08:24Z")

</div>

I just put a new Dragino LDDS75 Distance Detection Sensor into operation. Unfortunately it returns a “No Sensor” value in the payload. The battery information seems plausible, however: I tried using the repository de…

---

## [Dragino sensor + dragino lgateway loosing messages in a weird way](https://www.thethingsnetwork.org/forum/t/dragino-sensor-dragino-lgateway-loosing-messages-in-a-weird-way/40116)

<div class="topic-metadata">

**Author:** [@CxC\_IoT](https://www.thethingsnetwork.org/forum/u/CxC_IoT)\
**Replies:** 26\
**Last updated:** [December 7, 2021, 2:50pm UTC](https://www.thethingsnetwork.org/forum/t/dragino-sensor-dragino-lgateway-loosing-messages-in-a-weird-way/40116 "2021-12-07T14:50:26Z")

</div>

Hi everyone. My first post in this forum! My problem is that I am not getting all the data in my DB that I should. I have 16 sensors (dragino LSE01) installed and a gateway (dragino DLOS8 8 channels ) in the area too (…

---

## [LGT-92 - Downlink command to send package "on call"](https://www.thethingsnetwork.org/forum/t/lgt-92-downlink-command-to-send-package-on-call/53637)

<div class="topic-metadata">

**Author:** [@michmal](https://www.thethingsnetwork.org/forum/u/michmal)\
**Replies:** 3\
**Last updated:** [December 4, 2021, 7:36pm UTC](https://www.thethingsnetwork.org/forum/t/lgt-92-downlink-command-to-send-package-on-call/53637 "2021-12-04T19:36:09Z")

</div>

Hello everyone! I was wondering if there is a way to “force” LGT-92 to send a message? I know that there is ALARM button, but i would like to do something similar remotely, to check if device is working correctly by sen…

---

## [Need AT config of LGT-92-AA - have Dragino LGT-92-LI](https://www.thethingsnetwork.org/forum/t/need-at-config-of-lgt-92-aa-have-dragino-lgt-92-li/50159)

<div class="topic-metadata">

**Author:** [@timguy](https://www.thethingsnetwork.org/forum/u/timguy)\
**Replies:** 13\
**Last updated:** [November 29, 2021, 10:47am UTC](https://www.thethingsnetwork.org/forum/t/need-at-config-of-lgt-92-aa-have-dragino-lgt-92-li/50159 "2021-11-29T10:47:21Z")

</div>

Hi, can someone send me the AT+CFG output of the LGT-92-AA? Or should I find it in the githup repo somewhere? (but didn’t found it yet) Background: According to documentation this “naked” device has more fit for my c…

---

## [LGT-92 low GPS accuracy](https://www.thethingsnetwork.org/forum/t/lgt-92-low-gps-accuracy/30321)

<div class="topic-metadata">

**Author:** [@kazmi44](https://www.thethingsnetwork.org/forum/u/kazmi44)\
**Replies:** 44\
**Last updated:** [November 21, 2021, 8:34pm UTC](https://www.thethingsnetwork.org/forum/t/lgt-92-low-gps-accuracy/30321 "2021-11-21T20:34:04Z")

</div>

We have tested the gps in a field away from tall building and while driving in the street. We faced the low GPS accuracy issue. lgt-92 give up to 100m wrong location. Is anyone have faced the same issue ?

---

## [Delay on the TTN ends node](https://www.thethingsnetwork.org/forum/t/delay-on-the-ttn-ends-node/53237)

<div class="topic-metadata">

**Author:** [@chowden](https://www.thethingsnetwork.org/forum/u/chowden)\
**Replies:** 4\
**Last updated:** [November 18, 2021, 1:29pm UTC](https://www.thethingsnetwork.org/forum/t/delay-on-the-ttn-ends-node/53237 "2021-11-18T13:29:02Z")

</div>

i am receiving the data on the TTN every 50s only. how to make this less delay as I am trying to plot map out of this data. below on serial port it refreshes very 3 sec below is the sketch for this GPS tracking …

---

## [RFM95 LoRa Shield low range problem](https://www.thethingsnetwork.org/forum/t/rfm95-lora-shield-low-range-problem/53155)

<div class="topic-metadata">

**Author:** [@PhilippH](https://www.thethingsnetwork.org/forum/u/PhilippH)\
**Replies:** 5\
**Last updated:** [November 15, 2021, 2:55pm UTC](https://www.thethingsnetwork.org/forum/t/rfm95-lora-shield-low-range-problem/53155 "2021-11-15T14:55:40Z")

</div>

Hello, I recently carried out a range measurement with two Dragino LoRa shields with rfm95 modules (or rather PCBs derived from them with the same circuit). Already at 500m and direct line of sight the reception at SF11…

---

## [Arduino UNO + Dragino Lora Shield v1.4 can connect to TTN v2 but not on TTN v3 AU915](https://www.thethingsnetwork.org/forum/t/arduino-uno-dragino-lora-shield-v1-4-can-connect-to-ttn-v2-but-not-on-ttn-v3-au915/51051)

<div class="topic-metadata">

**Author:** [@marzukikamal](https://www.thethingsnetwork.org/forum/u/marzukikamal)\
**Replies:** 2\
**Last updated:** [October 26, 2021, 11:48pm UTC](https://www.thethingsnetwork.org/forum/t/arduino-uno-dragino-lora-shield-v1-4-can-connect-to-ttn-v2-but-not-on-ttn-v3-au915/51051 "2021-10-26T23:48:57Z")

</div>

Hi, I’m trying to connect the arduino to TTN v3 via ABP on AU915. On TTN v2, both ABP and OTAA work fine. But since now, v2 is read only, I need to setup end device on TTN v3. My hardware is: Arduino UNO with Dragino …

---

## [Please helppppp About sending my 1st TTN message :-)](https://www.thethingsnetwork.org/forum/t/please-helppppp-about-sending-my-1st-ttn-message/52620)

<div class="topic-metadata">

**Author:** [@psper](https://www.thethingsnetwork.org/forum/u/psper)\
**Replies:** 12\
**Last updated:** [October 25, 2021, 7:49pm UTC](https://www.thethingsnetwork.org/forum/t/please-helppppp-about-sending-my-1st-ttn-message/52620 "2021-10-25T19:49:29Z")

</div>

Hi ! I am trying to send my first TTN message. I have a dragino01 gateway on my desk, created and connected: ID : a84041194084ffff Name : 7Lab01 Gateway EUI : A84041194084FFFF Status …

---

## [LSN50v2 does not receive downlinks](https://www.thethingsnetwork.org/forum/t/lsn50v2-does-not-receive-downlinks/45805)

<div class="topic-metadata">

**Author:** [@mosivers](https://www.thethingsnetwork.org/forum/u/mosivers)\
**Replies:** 10\
**Last updated:** [October 18, 2021, 7:06am UTC](https://www.thethingsnetwork.org/forum/t/lsn50v2-does-not-receive-downlinks/45805 "2021-10-18T07:06:20Z")

</div>

Hi there, I am trying to get my LSN50v2 to join TTN v3 via OTAA but it does not seem to receive the join accept message. Here is an excerpt from my console. At first, I thought it was the RX1 Delay of 5 seconds. LSN…

---

## [Lora/GPS Shield and ardiuno (end device) to Things network v3](https://www.thethingsnetwork.org/forum/t/lora-gps-shield-and-ardiuno-end-device-to-things-network-v3/52300)

<div class="topic-metadata">

**Author:** [@chowden](https://www.thethingsnetwork.org/forum/u/chowden)\
**Replies:** 1\
**Last updated:** [October 12, 2021, 10:47am UTC](https://www.thethingsnetwork.org/forum/t/lora-gps-shield-and-ardiuno-end-device-to-things-network-v3/52300 "2021-10-12T10:47:57Z")

</div>

I am trying to connect my Lora/GPS shield and Arduino to TTN v3. I can see the gateway is connected. but the end device is not showing up on things network. is it that v3 no longer support Lora/GPS shield ?/ #include \<…

---

## [Structure for downlink code](https://www.thethingsnetwork.org/forum/t/structure-for-downlink-code/52224)

<div class="topic-metadata">

**Author:** [@weal5300](https://www.thethingsnetwork.org/forum/u/weal5300)\
**Replies:** 0\
**Last updated:** [October 8, 2021, 12:43pm UTC](https://www.thethingsnetwork.org/forum/t/structure-for-downlink-code/52224 "2021-10-08T12:43:33Z")

</div>

Does anyone know the structure for the downlink code?

---

## [ARDUINO UNO + DRAGINO SHIELD v1.4](https://www.thethingsnetwork.org/forum/t/arduino-uno-dragino-shield-v1-4/40196)

<div class="topic-metadata">

**Author:** [@Giaxa](https://www.thethingsnetwork.org/forum/u/Giaxa)\
**Replies:** 12\
**Last updated:** [September 26, 2021, 2:23pm UTC](https://www.thethingsnetwork.org/forum/t/arduino-uno-dragino-shield-v1-4/40196 "2021-09-26T14:23:00Z")

</div>

Dear Community, I am trying to find DEV-EUI in my node ARDUINO UNO + DRAGINO SHIELD v1.4, through the sketch TheThingsNetwork.h------\>device info, although this sketch includes: #define loraSerial Serial1 #define debu…

---

## [Adafruit feather m0 with TTN](https://www.thethingsnetwork.org/forum/t/adafruit-feather-m0-with-ttn/47751)

<div class="topic-metadata">

**Author:** [@Junaid\_Qadir](https://www.thethingsnetwork.org/forum/u/Junaid_Qadir)\
**Replies:** 96\
**Last updated:** [September 16, 2021, 11:48am UTC](https://www.thethingsnetwork.org/forum/t/adafruit-feather-m0-with-ttn/47751 "2021-09-16T11:48:04Z")

</div>

Hi, I am using adafruit feather m0 Lora node, I am trying to connect it with the TTN but it could not send the payload. Could someone please assist me with how to fix it? Sincerely Junaid

---

## [LT-22222 transmitting twice](https://www.thethingsnetwork.org/forum/t/lt-22222-transmitting-twice/51184)

<div class="topic-metadata">

**Author:** [@wolfp](https://www.thethingsnetwork.org/forum/u/wolfp)\
**Replies:** 9\
**Last updated:** [September 15, 2021, 6:14pm UTC](https://www.thethingsnetwork.org/forum/t/lt-22222-transmitting-twice/51184 "2021-09-15T18:14:23Z")

</div>

My Dragino LT-22222 is connected to TTS CE. After transmitting 28 data-packages it looks like it received a MAC-command and startet to transmit every package twice with the same FCnt but on different frequencies. The SNR…

---

## [LDDS75 with optional DS1820 -- not working](https://www.thethingsnetwork.org/forum/t/ldds75-with-optional-ds1820-not-working/50959)

<div class="topic-metadata">

**Author:** [@hellebauer](https://www.thethingsnetwork.org/forum/u/hellebauer)\
**Replies:** 8\
**Last updated:** [September 8, 2021, 11:26am UTC](https://www.thethingsnetwork.org/forum/t/ldds75-with-optional-ds1820-not-working/50959 "2021-09-08T11:26:28Z")

</div>

Did anybody get the LDDS75 with optional DS1820 to work? My setup: Hardware version:LSN50 RS-485-UART-I2C V1.3 LDDS75 LoRaWAN Distance Sensor Image Version: v1.1.4 I’m not able to get the DS1820 sensor to work with …

---

## [LSN50 V2 not joining via OTAA](https://www.thethingsnetwork.org/forum/t/lsn50-v2-not-joining-via-otaa/44348)

<div class="topic-metadata">

**Author:** [@ZwenAusZwota](https://www.thethingsnetwork.org/forum/u/ZwenAusZwota)\
**Replies:** 23\
**Last updated:** [August 17, 2021, 9:01pm UTC](https://www.thethingsnetwork.org/forum/t/lsn50-v2-not-joining-via-otaa/44348 "2021-08-17T21:01:55Z")

</div>

Hi everyone, I have a new Dragino LSN50 V2 and can’t get it to join the Network. I have entered the DEV\_EUI from my device in my application. During the join-request I see this DEV\_EUI, so I assume it is correct. What…

---

## [Problem registering Dragino ldds75](https://www.thethingsnetwork.org/forum/t/problem-registering-dragino-ldds75/41348)

<div class="topic-metadata">

**Author:** [@Marley\_Downs](https://www.thethingsnetwork.org/forum/u/Marley_Downs)\
**Replies:** 6\
**Last updated:** [August 17, 2021, 6:44am UTC](https://www.thethingsnetwork.org/forum/t/problem-registering-dragino-ldds75/41348 "2021-08-17T06:44:28Z")

</div>

---

## [RSSI values showing the recieved signal strength of gateway from node?](https://www.thethingsnetwork.org/forum/t/rssi-values-showing-the-recieved-signal-strength-of-gateway-from-node/44632)

<div class="topic-metadata">

**Author:** [@prajwalshetty](https://www.thethingsnetwork.org/forum/u/prajwalshetty)\
**Replies:** 23\
**Last updated:** [August 16, 2021, 11:59pm UTC](https://www.thethingsnetwork.org/forum/t/rssi-values-showing-the-recieved-signal-strength-of-gateway-from-node/44632 "2021-08-16T23:59:20Z")

</div>

when i send some payload from dragino lora shield(node) to the things network cloud using lg02(gateway) so i observed rssi values in the things network so my question is Is that the rssi values showing in the things n…

---

## [\*Solved\* Dragino LT-22222-L: TTS V3 EU863 OTAA join request fails (MIC mismatch)](https://www.thethingsnetwork.org/forum/t/solved-dragino-lt-22222-l-tts-v3-eu863-otaa-join-request-fails-mic-mismatch/50662)

<div class="topic-metadata">

**Author:** [@klaus\_schauer](https://www.thethingsnetwork.org/forum/u/klaus_schauer)\
**Replies:** 0\
**Last updated:** [August 16, 2021, 8:16am UTC](https://www.thethingsnetwork.org/forum/t/solved-dragino-lt-22222-l-tts-v3-eu863-otaa-join-request-fails-mic-mismatch/50662 "2021-08-16T08:16:00Z")

</div>

The OTAA registration of the LoRa IO Controller Dragino LT-22222-L on the TTS V3 EU863 fails. The device sends multiple join requests but receives no response. The following error message (event) is generated for the en…

---

## [LGT-92-LI external antenna](https://www.thethingsnetwork.org/forum/t/lgt-92-li-external-antenna/49420)

<div class="topic-metadata">

**Author:** [@hphillip](https://www.thethingsnetwork.org/forum/u/hphillip)\
**Replies:** 9\
**Last updated:** [August 7, 2021, 4:20pm UTC](https://www.thethingsnetwork.org/forum/t/lgt-92-li-external-antenna/49420 "2021-08-07T16:20:54Z")

</div>

I have the LGT-92-LI with 1.6.5 firmware and all is fine broadcasting data and I’m seeing everything I require in TTS CE (a.k.a V3). The range seems pretty limited so I took a look at the insides. Having openned the ca…

[Previous page](https://www.thethingsnetwork.org/forum/c/nodes/dragino/79.md?page=2)

[Next page](https://www.thethingsnetwork.org/forum/c/nodes/dragino/79.md?page=4)
