# Migrating Gateways to V3 **URL:** https://www.thethingsnetwork.org/forum/c/v2-to-v3-upgrade/migrating-gateways-to-v3/105.md [Latest](https://www.thethingsnetwork.org/forum/latest.md) · [Categories](https://www.thethingsnetwork.org/forum/categories.md) · [Tags](https://www.thethingsnetwork.org/forum/tags.md) --- ## [About the Migrating Gateways to V3 category](https://www.thethingsnetwork.org/forum/t/about-the-migrating-gateways-to-v3-category/43611)
**Author:** [@bluejedi](https://www.thethingsnetwork.org/forum/u/bluejedi)\ **Replies:** 0\ **Last updated:** [February 1, 2021, 6:17pm UTC](https://www.thethingsnetwork.org/forum/t/about-the-migrating-gateways-to-v3-category/43611 "2021-02-01T18:17:18Z")
Use this subcategory for questions and feedback about migrating gateways from TTN V2 to V3. For more information see: https://www.thethingsnetwork.org/forum/t/43608 --- ## [V2 to V3, gateway keeps status "disconnected"?](https://www.thethingsnetwork.org/forum/t/v2-to-v3-gateway-keeps-status-disconnected/43502)
**Author:** [@pe2bz](https://www.thethingsnetwork.org/forum/u/pe2bz)\ **Replies:** 16\ **Last updated:** [October 12, 2023, 12:59pm UTC](https://www.thethingsnetwork.org/forum/t/v2-to-v3-gateway-keeps-status-disconnected/43502 "2023-10-12T12:59:14Z")
Hi, started the migration to V3 this morning because of the yellow bannen information. Succesfully logged in to the V3 environment and indeed no gateways. So I added the gateway with the EUI-ID from my V2 console page. … --- ## [Gateway status:"disconnected" after migration from V2 to V3](https://www.thethingsnetwork.org/forum/t/gateway-status-disconnected-after-migration-from-v2-to-v3/44780)
**Author:** [@leewen](https://www.thethingsnetwork.org/forum/u/leewen)\ **Replies:** 50\ **Last updated:** [January 9, 2022, 5:33pm UTC](https://www.thethingsnetwork.org/forum/t/gateway-status-disconnected-after-migration-from-v2-to-v3/44780 "2022-01-09T17:33:46Z")
Hi guys, I have migrated my gateway from V2 to V3 through this guide: https://www.thethingsindustries.com/docs/getting-started/migrating/gateway-migration/ However the status still remain “disconnected” I would like… --- ## [Inaccessible gateways](https://www.thethingsnetwork.org/forum/t/inaccessible-gateways/53508)
**Author:** [@nufinuf](https://www.thethingsnetwork.org/forum/u/nufinuf)\ **Replies:** 15\ **Last updated:** [December 7, 2021, 9:23pm UTC](https://www.thethingsnetwork.org/forum/t/inaccessible-gateways/53508 "2021-12-07T21:23:54Z")
Hi, I have trouble with migration my gateways and devices to V3. I have more than 50 GWs all around the country, with no remote control (no VPN, no public IP address, physically hard to access them). There are connected… --- ## [Need help: The Things Kickstarter Gateway from v2 to v3](https://www.thethingsnetwork.org/forum/t/need-help-the-things-kickstarter-gateway-from-v2-to-v3/53507)
**Author:** [@battlecruiser](https://www.thethingsnetwork.org/forum/u/battlecruiser)\ **Replies:** 4\ **Last updated:** [November 30, 2021, 7:34am UTC](https://www.thethingsnetwork.org/forum/t/need-help-the-things-kickstarter-gateway-from-v2-to-v3/53507 "2021-11-30T07:34:12Z")
Hi, everyone. I added my “The Things Kickstarter Gateway” to v3 with its EUI but it showed as “Disconnected”. The gateway still shows as “connected(v2)” in the c2 console. I read from the Migrate Gateways (https://www… --- ## [How to Migrate Gateways from V2 to V3](https://www.thethingsnetwork.org/forum/t/how-to-migrate-gateways-from-v2-to-v3/43712)
**Author:** [@htdvisser](https://www.thethingsnetwork.org/forum/u/htdvisser)\ **Replies:** 36\ **Last updated:** [November 29, 2021, 10:28am UTC](https://www.thethingsnetwork.org/forum/t/how-to-migrate-gateways-from-v2-to-v3/43712 "2021-11-29T10:28:42Z")
I’m writing this post as a quick draft that will be extended and eventually turned into a documentation page. Also see: TTN V2 to V3 migration - Migrate your gateways last! Before You Begin Gateways connected to V… --- ## [Migrate RaspberryPi HAT Gateway (rak2247) from V2 to V3](https://www.thethingsnetwork.org/forum/t/migrate-raspberrypi-hat-gateway-rak2247-from-v2-to-v3/47724)
**Author:** [@trymjb](https://www.thethingsnetwork.org/forum/u/trymjb)\ **Replies:** 3\ **Last updated:** [October 12, 2021, 9:38am UTC](https://www.thethingsnetwork.org/forum/t/migrate-raspberrypi-hat-gateway-rak2247-from-v2-to-v3/47724 "2021-10-12T09:38:39Z")
Hey! I have seen similar posts about this topic, however i cant find a fitting solution. I want to move (or at least receive data in V3) my rak2247 gateway from The Things Network V2 to V3. I saw the gateway migration … --- ## [TTIG stuck on unknown account](https://www.thethingsnetwork.org/forum/t/ttig-stuck-on-unknown-account/52095)
**Author:** [@inanc\_oneasg](https://www.thethingsnetwork.org/forum/u/inanc_oneasg)\ **Replies:** 6\ **Last updated:** [October 4, 2021, 1:27pm UTC](https://www.thethingsnetwork.org/forum/t/ttig-stuck-on-unknown-account/52095 "2021-10-04T13:27:46Z")
Our TTIG is stuck on an unknown account, so we can not authorize / unauthorize and move it to the stack v3. This means that we have to buy a new one and throw this one away. There is no alternative provided. Someone mor… --- ## [V3 local\_conf.json "serv\_gw\_key": "what value?"](https://www.thethingsnetwork.org/forum/t/v3-local-conf-json-serv-gw-key-what-value/45753)
**Author:** [@hphillip](https://www.thethingsnetwork.org/forum/u/hphillip)\ **Replies:** 8\ **Last updated:** [August 12, 2021, 7:14am UTC](https://www.thethingsnetwork.org/forum/t/v3-local-conf-json-serv-gw-key-what-value/45753 "2021-08-12T07:14:23Z")
Just having a quick experiment with migrating my v2 gateway to v3 (obviously without deleting my v2 definition so I can swiftly swap back) However mp\_pkt\_fwd is hitting an issue with: “ERROR: \[TTN\] Connection to serve… --- ## [Migration of TTIGs to The Things Stack CE (v3)](https://www.thethingsnetwork.org/forum/t/migration-of-ttigs-to-the-things-stack-ce-v3/48146)
**Author:** [@KrishnaIyerEaswaran2](https://www.thethingsnetwork.org/forum/u/KrishnaIyerEaswaran2)\ **Replies:** 105\ **Last updated:** [July 13, 2021, 12:51pm UTC](https://www.thethingsnetwork.org/forum/t/migration-of-ttigs-to-the-things-stack-ce-v3/48146 "2021-07-13T12:51:14Z")
Since this is such a hot topic, I’ll try to consolidate some information here. Can I migrate TTIGs to The Things Stack Community Edition Not yet, but the backend infrastructure necessary for this is being tested at the … --- ## [TTN V2 to V3 migration](https://www.thethingsnetwork.org/forum/t/ttn-v2-to-v3-migration/43445)
**Author:** [@jpmeijers](https://www.thethingsnetwork.org/forum/u/jpmeijers)\ **Replies:** 51\ **Last updated:** [June 23, 2021, 3:38am UTC](https://www.thethingsnetwork.org/forum/t/ttn-v2-to-v3-migration/43445 "2021-06-23T03:38:22Z")
Packet Broker currently routes traffic from gateways connected to The Things Network V2 to V3. That is, gateway coverage of V2 is available in V3. But not the other way around : gateways already connected directly to V3… --- ## [TTIG migration to v3](https://www.thethingsnetwork.org/forum/t/ttig-migration-to-v3/48191)
**Author:** [@descartes](https://www.thethingsnetwork.org/forum/u/descartes)\ **Replies:** 0\ **Last updated:** [May 29, 2021, 9:33am UTC](https://www.thethingsnetwork.org/forum/t/ttig-migration-to-v3/48191 "2021-05-29T09:33:04Z")
See this: Migration of TTIGs to The Things Stack CE (v3) --- ## [TTIG Registration Guidance](https://www.thethingsnetwork.org/forum/t/ttig-registration-guidance/47629)
**Author:** [@vicatcu](https://www.thethingsnetwork.org/forum/u/vicatcu)\ **Replies:** 7\ **Last updated:** [May 12, 2021, 5:32pm UTC](https://www.thethingsnetwork.org/forum/t/ttig-registration-guidance/47629 "2021-05-12T17:32:51Z")
Just following up on this previous post: TTIG Registration on V3 Console - #3 by vicatcu Is the guidance that we should all be registering new TTIG gateways on the v3 console at this point? --- ## [Gateway send to v2 and v3?](https://www.thethingsnetwork.org/forum/t/gateway-send-to-v2-and-v3/47114)
**Author:** [@jrumpf](https://www.thethingsnetwork.org/forum/u/jrumpf)\ **Replies:** 0\ **Last updated:** [April 26, 2021, 12:15pm UTC](https://www.thethingsnetwork.org/forum/t/gateway-send-to-v2-and-v3/47114 "2021-04-26T12:15:01Z")
Hi i understand that v2 routes traffic to v3 - but its also possible to set my gateway more then one TTN Endpoint - so its easy to set TTNV2 and TTNv3 in parallel. This seems to work so far; But i am explicitly unsure … --- ## [Adding a Multitech mlinux Gateway to v3](https://www.thethingsnetwork.org/forum/t/adding-a-multitech-mlinux-gateway-to-v3/47031)
**Author:** [@jchonig](https://www.thethingsnetwork.org/forum/u/jchonig)\ **Replies:** 2\ **Last updated:** [April 25, 2021, 6:58pm UTC](https://www.thethingsnetwork.org/forum/t/adding-a-multitech-mlinux-gateway-to-v3/47031 "2021-04-25T18:58:43Z")
I’m reading up on how to pragmatically (via Ansible) add Multitech mLinux gateways (running kersing’s packet fowarder). Reading adding-gateways and multitechconduit-mlinux and the output of ttn-lw-cli gateway create -h … --- ## [Failed to migrate gateway from v2 to v3](https://www.thethingsnetwork.org/forum/t/failed-to-migrate-gateway-from-v2-to-v3/46530)
**Author:** [@symeonmattes](https://www.thethingsnetwork.org/forum/u/symeonmattes)\ **Replies:** 3\ **Last updated:** [April 9, 2021, 7:49am UTC](https://www.thethingsnetwork.org/forum/t/failed-to-migrate-gateway-from-v2-to-v3/46530 "2021-04-09T07:49:50Z")
Hi, I have setup correctly the TTIG gateway and in V2 of the things gateway it shows connected. I tried to migrated to v3 by following the doc, but with no success. I tried also this doc but again with no success. Th… --- ## [V3 Gateway status request via https fails with "unauthenticated"](https://www.thethingsnetwork.org/forum/t/v3-gateway-status-request-via-https-fails-with-unauthenticated/46097)
**Author:** [@jensileinchen](https://www.thethingsnetwork.org/forum/u/jensileinchen)\ **Replies:** 3\ **Last updated:** [March 29, 2021, 2:46pm UTC](https://www.thethingsnetwork.org/forum/t/v3-gateway-status-request-via-https-fails-with-unauthenticated/46097 "2021-03-29T14:46:44Z")
Hi there – yesterday we tried to ask the v3 (experimental)-gateway status via https-GET-request: https://eu1.cloud.thethings.network/api/v3/gs/gateways/ttn-rhein-sieg-07/connection/stats but it fails with message “unau… --- ## [Instructions we created to migrate Multitech IP67 gateways from TTNv2 to TTNv3](https://www.thethingsnetwork.org/forum/t/instructions-we-created-to-migrate-multitech-ip67-gateways-from-ttnv2-to-ttnv3/45826)
**Author:** [@GogleddCymru](https://www.thethingsnetwork.org/forum/u/GogleddCymru)\ **Replies:** 1\ **Last updated:** [March 22, 2021, 6:07pm UTC](https://www.thethingsnetwork.org/forum/t/instructions-we-created-to-migrate-multitech-ip67-gateways-from-ttnv2-to-ttnv3/45826 "2021-03-22T18:07:46Z")
Hi everyone,Notes on Multitech Gateway - External Organisations.pdf (957.1 KB) attached are some instructions that we created to migrate TTNv2 Multitech Gateways to TTNv3. Only sharing because it took a while for all t… --- ## [Connecting to both V2 and V3](https://www.thethingsnetwork.org/forum/t/connecting-to-both-v2-and-v3/45592)
**Author:** [@tkerby](https://www.thethingsnetwork.org/forum/u/tkerby)\ **Replies:** 2\ **Last updated:** [March 16, 2021, 5:38pm UTC](https://www.thethingsnetwork.org/forum/t/connecting-to-both-v2-and-v3/45592 "2021-03-16T17:38:56Z")
Some of my gateways (for instance Mikrotik) allow connection to multiple networks. Is there any reason not to connect to both V2 and V3 endpoints? I’m presuming V3 would deduplicate the extra packets coming in from V2 --- ## [Migrate RAK2245 from TTN to TheThingsStack v3](https://www.thethingsnetwork.org/forum/t/migrate-rak2245-from-ttn-to-thethingsstack-v3/44635)
**Author:** [@ecosoph](https://www.thethingsnetwork.org/forum/u/ecosoph)\ **Replies:** 7\ **Last updated:** [March 4, 2021, 7:39pm UTC](https://www.thethingsnetwork.org/forum/t/migrate-rak2245-from-ttn-to-thethingsstack-v3/44635 "2021-03-04T19:39:29Z")
Hi Guys, I would like to migrate my Gateway that has been working on TTN to v3, I’m using a RAK2245 along with a RPI3B+. For the initial setup, I’ve followed the latest documentation: GitHub - RAKWireless/rak\_common\_fo… --- ## [Trouble with migration a RPi ic880A GW to V3](https://www.thethingsnetwork.org/forum/t/trouble-with-migration-a-rpi-ic880a-gw-to-v3/44373)
**Author:** [@BK-Vest](https://www.thethingsnetwork.org/forum/u/BK-Vest)\ **Replies:** 18\ **Last updated:** [February 25, 2021, 9:42am UTC](https://www.thethingsnetwork.org/forum/t/trouble-with-migration-a-rpi-ic880a-gw-to-v3/44373 "2021-02-25T09:42:48Z")
Trouble with migration a RPi ic880A GW to TTS! (It worked in TTN V2) I used this Image: https://github.com/ttn-zh/ic880a-gateway To migrate I thought just restart the configuration: sudo ./install.sh spi and changes… --- ## [Server address documentation](https://www.thethingsnetwork.org/forum/t/server-address-documentation/44607)
**Author:** [@disk91](https://www.thethingsnetwork.org/forum/u/disk91)\ **Replies:** 0\ **Last updated:** [February 21, 2021, 4:14pm UTC](https://www.thethingsnetwork.org/forum/t/server-address-documentation/44607 "2021-02-21T16:14:11Z")
For TTNv3 This page https://www.thethingsindustries.com/docs/gateways/lora-basics-station/lns/ gives a reference to https://www.thethingsindustries.com/docs/getting-started/ page to find the LNS server addresses (same … --- ## [The Things Gateway - will it work on V3?](https://www.thethingsnetwork.org/forum/t/the-things-gateway-will-it-work-on-v3/44141)
**Author:** [@mikcatta](https://www.thethingsnetwork.org/forum/u/mikcatta)\ **Replies:** 5\ **Last updated:** [February 17, 2021, 9:25am UTC](https://www.thethingsnetwork.org/forum/t/the-things-gateway-will-it-work-on-v3/44141 "2021-02-17T09:25:34Z")
Spurred on by a Twitter topic, I thought I’d have a go at getting my “The Things Gateway” to work on V3. The Prerequisites list 1. The Things Gateway running the latest firmware (a minimum of v1.0.8 is necessary). Howev… --- ## [The Things Indoor Gateway migration V2 to V3](https://www.thethingsnetwork.org/forum/t/the-things-indoor-gateway-migration-v2-to-v3/44134)
**Author:** [@NosDE](https://www.thethingsnetwork.org/forum/u/NosDE)\ **Replies:** 10\ **Last updated:** [February 12, 2021, 1:13pm UTC](https://www.thethingsnetwork.org/forum/t/the-things-indoor-gateway-migration-v2-to-v3/44134 "2021-02-12T13:13:13Z")
Hi, how can I migrate my “The Things Indoor Gateway” from V2 to V3? Kind regards Marco --- ## [Add Laird Basics Station TTN Stack V3](https://www.thethingsnetwork.org/forum/t/add-laird-basics-station-ttn-stack-v3/43341)
**Author:** [@jakymiwm](https://www.thethingsnetwork.org/forum/u/jakymiwm)\ **Replies:** 16\ **Last updated:** [February 2, 2021, 7:02pm UTC](https://www.thethingsnetwork.org/forum/t/add-laird-basics-station-ttn-stack-v3/43341 "2021-02-02T19:02:29Z")
Hello, I am new to TTN and just want to add my gateway (RG191) to the network. With TTN V2 I could use the UDP Forwarder, easy. Register the EUI and I am good. I could use the TTN Forwarder, easy. Register the ID and …