--->  I have added *** to hide information that may not be good to let out into the world.
Script /etc/ppp/ip-up finished (pid 4782), status = 0x0

Script /etc/ppp/ip-up started (pid 4782)

secondary DNS address 10.177.0.210

primary   DNS address 10.177.0.34

remote IP address 10.64.64.64

local  IP address 25.180.199.25

not replacing existing default route via 10.130.1.1

Could not determine remote IP address: defaulting to 10.64.64.64

rcvd [IPCP ConfAck id=0x2 <addr 25.180.199.25> <ms-dns1 10.177.0.34> <ms-dns2 10.177.0.210>]

sent [IPCP ConfAck id=0x1]

rcvd [IPCP ConfReq id=0x1]

sent [IPCP ConfReq id=0x2 <addr 25.180.199.25> <ms-dns1 10.177.0.34> <ms-dns2 10.177.0.210>]

rcvd [IPCP ConfNak id=0x1 <addr 25.180.199.25> <ms-dns1 10.177.0.34> <ms-dns2 10.177.0.210>]

sent [IPCP ConfNak id=0x0 <addr 0.0.0.0>]

rcvd [IPCP ConfReq id=0x0]

sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns2 0.0.0.0>]

PAP authentication succeeded

rcvd [PAP AuthAck id=0x1 ""]

rcvd [LCP EchoRep id=0x0 magic=********** e4 15 16 16]

rcvd [LCP DiscReq id=0x2 magic=**********]

sent [PAP AuthReq id=0x1 user="" password=<hidden>]

sent [LCP EchoReq id=0x0 magic=0xe4151616]

sent [LCP ConfAck id=0x1 <asyncmap 0x0> <auth pap> <magic 0xb92ecee9> <pcomp> <accomp>]

rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0xb92ecee9> <pcomp> <accomp>]

rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0xe4151616> <pcomp> <accomp>]

sent [LCP ConfNak id=0x0 <auth pap>]

rcvd [LCP ConfReq id=0x0 <asyncmap 0x0> <auth chap MD5> <magic 0xb92ecee9> <pcomp> <accomp>]

sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xe4151616> <pcomp> <accomp>]

Connect: ppp0 <--> /dev/ttyUSB2

Using interface ppp0

using channel 1

Serial connection established.

Script ''chat -s -v ABORT BUSY ABORT "NO CARRIER" ABORT "NO DIALTONE" ABORT ERROR ABORT "NO ANSWER" TIMEOUT 45 		"" AT OK ATE0 OK ATI\;+CSUB\;+CSQ\;+CPIN?\;+COPS?\;+CGREG?\;\&D2 		OK AT+CGDCONT=1,\"IP\",\"wholesale\",,0,0 OK ATD*99# CONNECT'' finished (pi
d 4613), status = 0x0



 -- got it

CONNECT

^M

^M

expect (CONNECT)

send (ATD*99#^M)



 -- got it

OK

^M

^M

expect (OK)

send (AT+CGDCONT=1,"IP","wholesale",,0,0^M)



 -- got it

OK

^M

+CGREG: 0,1^M

^M

+COPS: 0,0,"Ting",7^M

^M

+CPIN: READY^M

^M

+CSQ: 31,99^M

^M

SubEdition: V06^M

^M

Revision: EC25AFAR05A04M4G^M

EC25^M

Quectel^M

^M

^M

expect (OK)

send (ATI;+CSUB;+CSQ;+CPIN?;+COPS?;+CGREG?;&D2^M)



 -- got it

OK

ATE0^M^M

^M

expect (OK)

send (ATE0^M)



 -- got it

OK

AT^M^M

expect (OK)

send (AT^M)

timeout set to 45 seconds

abort on (NO ANSWER)

abort on (ERROR)

abort on (NO DIALTONE)

abort on (NO CARRIER)

abort on (BUSY)

noipx		# (from /etc/ppp/options)

noccp		# (from command line)

usepeerdns		# (from command line)

defaultroute		# (from command line)

ipcp-max-configure 30		# (from command line)

noipdefault		# (from command line)

ipcp-accept-remote		# (from command line)

ipcp-accept-local		# (from command line)

novjccomp		# (from command line)

novj		# (from command line)

hide-password		# (from /etc/ppp/options)

lcp-echo-interval 30		# (from /etc/ppp/options)

lcp-echo-failure 4		# (from /etc/ppp/options)

asyncmap 0		# (from /etc/ppp/options)

modem		# (from command line)

nocrtscts		# (from command line)

disconnect ''chat -s -v ABORT ERROR ABORT \"NO DIALTONE\" SAY \"\\nSending break to the modem\\n\" \"\" +++ \"\" +++ \"\" +++ SAY \"\\nGood bay\\n\"''		# (from command line)

		# (from command line)

connect ''chat -s -v ABORT BUSY ABORT \"NO CARRIER\" ABORT \"NO DIALTONE\" ABORT ERROR ABORT \"NO ANSWER\" TIMEOUT 45 \t\t\"\" AT OK ATE0 OK ATI\\;+CSUB\\;+CSQ\\;+CPIN?\\;+COPS?\\;+CGREG?\\;\\&D2 \t\tOK AT+CGDCONT=1,\\\"IP\\\",\\\"wholesale\\\",,0,0 OK AT


lock		# (from command line)

115200		# (from command line)

/dev/ttyUSB2		# (from command line)

password ??????		# (from command line)

user 		# (from command line)

noauth		# (from command line)

dump		# (from command line)

nodetach		# (from command line)

debug		# (from command line)

pppd options in effect: