# Adafruit M0 LoRa & RPI Gateway

**URL:** <https://www.thethingsnetwork.org/forum/t/adafruit-m0-lora-rpi-gateway/15781>\
**Category:** LMIC\
**Created:** [July 11, 2018, 3:49pm UTC](https://www.thethingsnetwork.org/forum/t/adafruit-m0-lora-rpi-gateway/15781 "2018-07-11T15:49:06Z")\
**Posts on this page:** 1\
**Showing post:** 11

<div class="post-metadata">

**Author:** ![WalleM](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/wallem/32/25844_2.png) [@WalleM](https://www.thethingsnetwork.org/forum/u/WalleM)\
**Post date:** [July 11, 2018, 6:19pm UTC](https://www.thethingsnetwork.org/forum/t/adafruit-m0-lora-rpi-gateway/15781/11 "2018-07-11T18:19:19Z")

</div>

Yes, that was the problem, I followed the instructions of the following post: [Can LMIC 1.6 be set up to use a single channel and SF?](https://www.thethingsnetwork.org/forum/t/can-lmic-1-6-be-set-up-to-use-a-single-channel-and-sf/5207/11)  
it’s almost working well, now I get messages from the node at the correct time, but now is changing the payload, the correct dev addr is 260219F8 and it’s sending different dev addrs, sometimes it sends the correct payload but most of the messages are wrong.  
 ![Captura5](https://www.thethingsnetwork.org/forum/uploads/default/original/2X/0/0baa8e5fe7393c418cd0bb3c6ee50901b79354ff.PNG)

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/adafruit-m0-lora-rpi-gateway/15781)._