# ADR downlinks **URL:** \ **Category:** LMIC\ **Created:** [August 21, 2021, 1:12pm UTC](https://www.thethingsnetwork.org/forum/t/adr-downlinks/50861 "2021-08-21T13:12:25Z")\ **Posts on this page:** 1\ **Showing post:** 12
**Author:** ![evansri](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/evansri/32/35697_2.png) [@evansri](https://www.thethingsnetwork.org/forum/u/evansri)\ **Post date:** [August 21, 2021, 6:01pm UTC](https://www.thethingsnetwork.org/forum/t/adr-downlinks/50861/12 "2021-08-21T18:01:57Z")
Thanks. I will take a look at the latest LMIC. The link the forum: > [@LMIC-node | One example to rule them all](https://www.thethingsnetwork.org/forum/t/lmic-node-one-example-to-rule-them-all/46964): > > LMIC-node LMIC-node is an example LoRaWAN application for a node for The Things Network. It uses the Arduino framework, the LMIC LoRaWAN library and PlatformIO. With LMIC-node it is easy to get a working node quickly up and running. Basic steps to get a node up and running with LMIC-node Select a supported board Select your LoRaWAN region Provide the LoRaWAN keys for your node Compile and upload the firmware and you’re ready to go! Implemented features Send uplink messages. Receive down… points at: > **[GitHub - lnlp/LMIC-node: LMIC-node | One example to rule them all....](https://github.com/lnlp/LMIC-node)** > > LMIC-node | One example to rule them all. LMIC-node is an example LoRaWAN application for a node that can be used with The Things Network. It demonstrates how to send uplink messages, how to receive downlink messages, how to implement a downlink command and it provides useful status information. With LMIC-node it is easy to get a working node quickly up and running. LMIC-node supports many popular (LoRa) development boards out of the box. It uses the Arduino framework, the LMIC LoRaWAN library and PlatformIO. which is 1.3.0. Is that the latest? --- _[View the full topic](https://www.thethingsnetwork.org/forum/t/adr-downlinks/50861)._