# Arduino pin interrupts

**URL:** <https://www.thethingsnetwork.org/forum/t/arduino-pin-interrupts/28018>\
**Category:** Hardware\
**Created:** [April 27, 2019, 9:45am UTC](https://www.thethingsnetwork.org/forum/t/arduino-pin-interrupts/28018 "2019-04-27T09:45:52Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![LoRaTracker](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/loratracker/32/48502_2.png) [@LoRaTracker](https://www.thethingsnetwork.org/forum/u/LoRaTracker)\
**Post date:** [July 7, 2019, 8:27pm UTC](https://www.thethingsnetwork.org/forum/t/arduino-pin-interrupts/28018/7 "2019-07-07T20:27:28Z")

</div>

> [@Full Arduino Mini LoraWAN below 1uA Sleep Mode](https://www.thethingsnetwork.org/forum/t/full-arduino-mini-lorawan-below-1ua-sleep-mode/8059/316):
>
> wake it up via TPL5110 😉

If you want to wake up a board (from sleep) use the TPL5010, its designed for that purpose.

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/arduino-pin-interrupts/28018)._