# Can't Install CLI on Conduit AEP

**URL:** <https://www.thethingsnetwork.org/forum/t/cant-install-cli-on-conduit-aep/46483>\
**Category:** MultiTech Gateways\
**Created:** [April 7, 2021, 2:00pm UTC](https://www.thethingsnetwork.org/forum/t/cant-install-cli-on-conduit-aep/46483 "2021-04-07T14:00:10Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Harris\_rjh](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/harris_rjh/32/35697_2.png) [@Harris\_rjh](https://www.thethingsnetwork.org/forum/u/Harris_rjh)\
**Post date:** [April 7, 2021, 2:00pm UTC](https://www.thethingsnetwork.org/forum/t/cant-install-cli-on-conduit-aep/46483/1 "2021-04-07T14:00:10Z")

</div>

Hi there,

Sorry if this is a stupid mistake, I’m very new to all of this. I’ve been trying to setup the basic station using the walkthrough here:  
[https://www.thethingsindustries.com/docs/gateways/multitechconduit/lbs/](https://www.thethingsindustries.com/docs/gateways/multitechconduit/lbs/)  
And to do so need to install the CLI, I’ve tried following this:  
[https://www.thethingsindustries.com/docs/gateways/lora-basics-station/cups/](https://www.thethingsindustries.com/docs/gateways/lora-basics-station/cups/)  
But when I SSH the linux commands into it it can’t find the commands. Am I using this correctly/can anyone help me find what’s wrong?  
Thank you for your time.  
Edit: Forgot to actually say that when inputing the linux commands putty returns that it can’t find the ‘snap’ command.

---

<div class="post-metadata">

**Author:** ![jreiss](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/jreiss/32/46529_2.png) [@jreiss](https://www.thethingsnetwork.org/forum/u/jreiss)\
**Post date:** [April 20, 2021, 12:40am UTC](https://www.thethingsnetwork.org/forum/t/cant-install-cli-on-conduit-aep/46483/2 "2021-04-20T00:40:37Z")

</div>

The TTN CLI does not need to be installed on a gateway.  
Install the CLI on a linux PC to manage your TTN account.