# Changing Data Rate on TTN stack (Multicast)

**URL:** <https://www.thethingsnetwork.org/forum/t/changing-data-rate-on-ttn-stack-multicast/46430>\
**Category:** The Things Stack v3\
**Created:** [April 6, 2021, 12:24pm UTC](https://www.thethingsnetwork.org/forum/t/changing-data-rate-on-ttn-stack-multicast/46430 "2021-04-06T12:24:50Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![descartes](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/descartes/32/47220_2.png) [@descartes](https://www.thethingsnetwork.org/forum/u/descartes)\
**Post date:** [April 7, 2021, 7:51pm UTC](https://www.thethingsnetwork.org/forum/t/changing-data-rate-on-ttn-stack-multicast/46430/9 "2021-04-07T19:51:22Z")

</div>

Then if you don’t override the device settings, it should work as designed.

DR0 & DR1 are not permitted for normal operation.

SF9 is used for Rx2 downlinks.

But mostly, you should let the network & the device find the best DR for its situation.

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/changing-data-rate-on-ttn-stack-multicast/46430)._
