# Couple of questions after setting up my gateway

**URL:** <https://www.thethingsnetwork.org/forum/t/couple-of-questions-after-setting-up-my-gateway/26960>\
**Category:** Raspberry Pi Gateways\
**Created:** [June 9, 2019, 12:40am UTC](https://www.thethingsnetwork.org/forum/t/couple-of-questions-after-setting-up-my-gateway/26960 "2019-06-09T00:40:40Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![arjanvanb](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/arjanvanb/32/46626_2.png) [@arjanvanb](https://www.thethingsnetwork.org/forum/u/arjanvanb)\
**Post date:** [June 10, 2019, 8:53pm UTC](https://www.thethingsnetwork.org/forum/t/couple-of-questions-after-setting-up-my-gateway/26960/3 "2019-06-10T20:53:50Z")

</div>

> [@rogerg](#):
>
> I have found that providing my GPS module has signal, the GPS coordinates captured by it, and output in the syslog, do transfer through to the TTN console and have overwritten previous vague values I entered there

I’m not sure if the OP has a GPS-enabled gateway too? If not, then it should not send coordinates from some configuration file (nor send any time), but instead use TTN Console; see [Gateway GPS configuration in local\_conf.json - #4 by htdvisser](https://www.thethingsnetwork.org/forum/t/gateway-gps-configuration-in-local-conf-json/6176/4).

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/couple-of-questions-after-setting-up-my-gateway/26960)._