# Designing a breakout board for the ESP32 / RFM9X

**URL:** <https://www.thethingsnetwork.org/forum/t/designing-a-breakout-board-for-the-esp32-rfm9x/1952>\
**Category:** Hardware\
**Created:** [April 23, 2016, 4:12pm UTC](https://www.thethingsnetwork.org/forum/t/designing-a-breakout-board-for-the-esp32-rfm9x/1952 "2016-04-23T16:12:09Z")\
**Posts on this page:** 1\
**Showing post:** 20

<div class="post-metadata">

**Author:** ![smeedy](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/smeedy/32/31307_2.png) [@smeedy](https://www.thethingsnetwork.org/forum/u/smeedy)\
**Post date:** [September 28, 2017, 8:05pm UTC](https://www.thethingsnetwork.org/forum/t/designing-a-breakout-board-for-the-esp32-rfm9x/1952/20 "2017-09-28T20:05:32Z")

</div>

Trick is though I’m not running the Arduino port. I’m running C/C++ with FreeRTOS tasks to schedule work and using eventgroups to exchange state among them.

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/designing-a-breakout-board-for-the-esp32-rfm9x/1952)._