# Directly connect SMA to RFM95W

**URL:** <https://www.thethingsnetwork.org/forum/t/directly-connect-sma-to-rfm95w/13329>\
**Category:** Hardware\
**Created:** [April 4, 2018, 12:57pm UTC](https://www.thethingsnetwork.org/forum/t/directly-connect-sma-to-rfm95w/13329 "2018-04-04T12:57:55Z")\
**Posts on this page:** 1\
**Showing post:** 16

<div class="post-metadata">

**Author:** ![bluejedi](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/bluejedi/32/48549_2.png) [@bluejedi](https://www.thethingsnetwork.org/forum/u/bluejedi)\
**Post date:** [April 5, 2018, 8:57am UTC](https://www.thethingsnetwork.org/forum/t/directly-connect-sma-to-rfm95w/13329/16 "2018-04-05T08:57:48Z")

</div>

Yes, the ground plane is of substantial influence.

If I understood correctly, the length of a quarter-wave mono-pole is based on having a proper groundplane because the ground plane in fact serves as the counterpoise of a half wave di-pole.  
From this perspective, when having a proper ground plane the length of the mono-pole should be exactly one quarter-wave length (velocity factor not taken into account).

Here in the [Antenna length for 868 and 433 MHz](https://www.thethingsnetwork.org/forum/t/antenna-length-for-868-and-433-mhz/5378/15?u=bluejedi) topic a general rule of thumb is mentioned to use 5% for the velocity factor.

86.3mm x 0.95 = 81,99mm which exactly matches your 82mm.

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/directly-connect-sma-to-rfm95w/13329)._
