# Dragino gateway -- support TTN Basic Station **URL:** \ **Category:** The Things Stack v3\ **Created:** [August 27, 2021, 3:46am UTC](https://www.thethingsnetwork.org/forum/t/dragino-gateway-support-ttn-basic-station/51053 "2021-08-27T03:46:19Z")\ **Posts on this page:** 1\ **Showing post:** 33
**Author:** ![Jeff-UK](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/jeff-uk/32/35697_2.png) [@Jeff-UK](https://www.thethingsnetwork.org/forum/u/Jeff-UK)\ **Post date:** [November 5, 2021, 9:08pm UTC](https://www.thethingsnetwork.org/forum/t/dragino-gateway-support-ttn-basic-station/51053/33 "2021-11-05T21:08:28Z")
Indeed that was the conclusion I came to at end of this thread > [@Impossible to re-connect gateway after recreating](https://www.thethingsnetwork.org/forum/t/impossible-to-re-connect-gateway-after-recreating/52486/6): > > Sorry cant help too much there guess its because… software! roll_eyes Tried multiple ways but didnt seem to carry settings so could only get back online after a full reset at which point GW started with default EU settings for V3 - in line with last attempt, and is now happily online and appears stable. Looks like @rharte came to same conclusion yesterday [https://www.thethingsnetwork.org/forum/t/running-into-problems-migrating-dragino-lps8-to-v3/52474](https://www.thethingsnetwork.org/forum/t/running-into-problems-migrating-dragino-lps8-to-v3/52474) Atleast anyone following behind us no… Only way to get back online was a full reset to bypass any (partial or incomplete) settings carry over. In my case I decided to stick with UDP (for now) but suspect same could have applied with a simultaneous move to BS… I may reconsider when a demonstrated proven path to BS on new firmware emerges… --- _[View the full topic](https://www.thethingsnetwork.org/forum/t/dragino-gateway-support-ttn-basic-station/51053)._