# Dragino LGT-92 connect to TTN **URL:** \ **Category:** How to get started\ **Tags:** dragino\ **Created:** [November 7, 2022, 2:28pm UTC](https://www.thethingsnetwork.org/forum/t/dragino-lgt-92-connect-to-ttn/59795 "2022-11-07T14:28:54Z")\ **Posts on this page:** 13\ **Page:** 1
**Author:** ![beernink](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/beernink/32/35697_2.png) [@beernink](https://www.thethingsnetwork.org/forum/u/beernink)\ **Post date:** [November 7, 2022, 2:28pm UTC](https://www.thethingsnetwork.org/forum/t/dragino-lgt-92-connect-to-ttn/59795/1 "2022-11-07T14:28:55Z")
Hi there, some time ago I bough a LGT92 tracker. Connected it to TTN and started to track. It all worked fine. Now after a while, my LGT92 does not connect to the TTN anymore. I do not have a personal gateway, so I drive to a nearby spot to get it going again. Till now no success. Can someone tell me how to get the tracker connected again? I use it for my boat and motorbike to keep any eye on it. Hans ---
**Author:** ![Johan\_Scheepers](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/johan_scheepers/32/48536_2.png) [@Johan\_Scheepers](https://www.thethingsnetwork.org/forum/u/Johan_Scheepers)\ **Post date:** [November 7, 2022, 2:40pm UTC](https://www.thethingsnetwork.org/forum/t/dragino-lgt-92-connect-to-ttn/59795/2 "2022-11-07T14:40:29Z")
How long ago did you start using it? What is the battery level like? ---
**Author:** ![Jeff-UK](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/jeff-uk/32/35697_2.png) [@Jeff-UK](https://www.thethingsnetwork.org/forum/u/Jeff-UK)\ **Post date:** [November 7, 2022, 2:42pm UTC](https://www.thethingsnetwork.org/forum/t/dragino-lgt-92-connect-to-ttn/59795/3 "2022-11-07T14:42:19Z")
> [@beernink](#): > > some time ago How long ago? Is it on TTS(CE) aka TTN V3 or older from V2 (Shutdown Dec’21) Did you re-register to V3? I sometimes find that recharging from dead doesnt kick of start up and have to tun off and on again! Triggers a new join (in range of a GW!) ---
**Author:** ![beernink](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/beernink/32/35697_2.png) [@beernink](https://www.thethingsnetwork.org/forum/u/beernink)\ **Post date:** [November 7, 2022, 2:42pm UTC](https://www.thethingsnetwork.org/forum/t/dragino-lgt-92-connect-to-ttn/59795/4 "2022-11-07T14:42:41Z")
Hey Johan, quite some time. before V3. Battery level is ok, and the unit can be approached using the usb cable with AT commands ---
**Author:** ![Johan\_Scheepers](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/johan_scheepers/32/48536_2.png) [@Johan\_Scheepers](https://www.thethingsnetwork.org/forum/u/Johan_Scheepers)\ **Post date:** [November 7, 2022, 2:44pm UTC](https://www.thethingsnetwork.org/forum/t/dragino-lgt-92-connect-to-ttn/59795/5 "2022-11-07T14:44:16Z")
Does it not power it via the USB cable? I would suggest you move it to V3? (Or have you done it already?) ---
**Author:** ![Jeff-UK](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/jeff-uk/32/35697_2.png) [@Jeff-UK](https://www.thethingsnetwork.org/forum/u/Jeff-UK)\ **Post date:** [November 7, 2022, 2:44pm UTC](https://www.thethingsnetwork.org/forum/t/dragino-lgt-92-connect-to-ttn/59795/6 "2022-11-07T14:44:18Z")
> [@beernink](#): > > before V3 In which case if not already done ignore the old V2 instance - which you cant access any how! - just re-register under V3 and power cycle, should all be good - assuming battery didnt degrade if left uncharged for too long! ---
**Author:** ![beernink](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/beernink/32/35697_2.png) [@beernink](https://www.thethingsnetwork.org/forum/u/beernink)\ **Post date:** [November 7, 2022, 2:44pm UTC](https://www.thethingsnetwork.org/forum/t/dragino-lgt-92-connect-to-ttn/59795/7 "2022-11-07T14:44:20Z")
Its a V2 setup, but I tried to do a new join on V3 ---
**Author:** ![beernink](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/beernink/32/35697_2.png) [@beernink](https://www.thethingsnetwork.org/forum/u/beernink)\ **Post date:** [November 7, 2022, 2:45pm UTC](https://www.thethingsnetwork.org/forum/t/dragino-lgt-92-connect-to-ttn/59795/8 "2022-11-07T14:45:53Z")
How do I move it to V3. I think this is the challenge ---
**Author:** ![Johan\_Scheepers](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/johan_scheepers/32/48536_2.png) [@Johan\_Scheepers](https://www.thethingsnetwork.org/forum/u/Johan_Scheepers)\ **Post date:** [November 7, 2022, 2:48pm UTC](https://www.thethingsnetwork.org/forum/t/dragino-lgt-92-connect-to-ttn/59795/9 "2022-11-07T14:48:08Z")
You just reregister it on V3, same credentials. ---
**Author:** ![beernink](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/beernink/32/35697_2.png) [@beernink](https://www.thethingsnetwork.org/forum/u/beernink)\ **Post date:** [November 7, 2022, 2:50pm UTC](https://www.thethingsnetwork.org/forum/t/dragino-lgt-92-connect-to-ttn/59795/10 "2022-11-07T14:50:25Z")
I did. It seems to register without error, but when trying to join on the nearest Gway, no result. Answer I get on the serial port is : TX ok, No receive ---
**Author:** ![Jeff-UK](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/jeff-uk/32/35697_2.png) [@Jeff-UK](https://www.thethingsnetwork.org/forum/u/Jeff-UK)\ **Post date:** [November 7, 2022, 2:52pm UTC](https://www.thethingsnetwork.org/forum/t/dragino-lgt-92-connect-to-ttn/59795/11 "2022-11-07T14:52:02Z")
Create a new application for yourself under V3 console, then add new device then add manually. Go to payload formatters and add Cayenne LPP for uplink, then head to Integrations → Webhooks to get t your end destination dashboard, e.g. myDevices/Cayenne or what ever… ---
**Author:** ![Jeff-UK](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/jeff-uk/32/35697_2.png) [@Jeff-UK](https://www.thethingsnetwork.org/forum/u/Jeff-UK)\ **Post date:** [November 7, 2022, 2:53pm UTC](https://www.thethingsnetwork.org/forum/t/dragino-lgt-92-connect-to-ttn/59795/12 "2022-11-07T14:53:16Z")
> [@beernink](#): > > I did. It seems to register without error Double, then treble check your keys and device details etc…nothing in the application/device window? ---
**Author:** ![beernink](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/beernink/32/35697_2.png) [@beernink](https://www.thethingsnetwork.org/forum/u/beernink)\ **Post date:** [November 7, 2022, 2:54pm UTC](https://www.thethingsnetwork.org/forum/t/dragino-lgt-92-connect-to-ttn/59795/13 "2022-11-07T14:54:23Z")
I am going to try. Thanks.