# ERROR: Decode uplink data message failure - Invalid output

**URL:** <https://www.thethingsnetwork.org/forum/t/error-decode-uplink-data-message-failure-invalid-output/50980>\
**Category:** End Devices (Nodes)\
**Created:** [August 25, 2021, 11:53am UTC](https://www.thethingsnetwork.org/forum/t/error-decode-uplink-data-message-failure-invalid-output/50980 "2021-08-25T11:53:03Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![fergocen](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/fergocen/32/39216_2.png) [@fergocen](https://www.thethingsnetwork.org/forum/u/fergocen)\
**Post date:** [August 25, 2021, 11:53am UTC](https://www.thethingsnetwork.org/forum/t/error-decode-uplink-data-message-failure-invalid-output/50980/1 "2021-08-25T11:53:03Z")

</div>

Hello. I’m new here so I have many questions 🙂 . I’m sending an uplink message (a string like hello) to the gateway using Arduino + rn2483. The messages I sent appear on the ardunio serial port screen and also on the TTN live data screen. However, I am getting an error like this:  
‘‘Decode uplink data message failure - Invalid output’’. What should I do, thank you in advance for your help.

note: I made all my adjustments and codes from here. ([https://www.thethingsnetwork.org/forum/t/how-to-build-your-first-ttn-node-arduino-rn2483/1574](https://www.thethingsnetwork.org/forum/t/how-to-build-your-first-ttn-node-arduino-rn2483/1574))
