# Full Arduino Mini LoraWAN below 1uA Sleep Mode

**URL:** <https://www.thethingsnetwork.org/forum/t/full-arduino-mini-lorawan-below-1ua-sleep-mode/8059>\
**Category:** End Devices (Nodes)\
**Created:** [June 22, 2017, 3:45pm UTC](https://www.thethingsnetwork.org/forum/t/full-arduino-mini-lorawan-below-1ua-sleep-mode/8059 "2017-06-22T15:45:10Z")\
**Posts on this page:** 1\
**Showing post:** 316

<div class="post-metadata">

**Author:** ![LoRaTracker](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/loratracker/32/48502_2.png) [@LoRaTracker](https://www.thethingsnetwork.org/forum/u/LoRaTracker)\
**Post date:** [April 5, 2022, 11:45am UTC](https://www.thethingsnetwork.org/forum/t/full-arduino-mini-lorawan-below-1ua-sleep-mode/8059/316 "2022-04-05T11:45:36Z")

</div>

If your using the Arduino IDE, you can download the core for the NanoEvery\ATmega4809 and check if the program you have (and the sensor libraires used) compiles OK and how much space the entire program uses.

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/full-arduino-mini-lorawan-below-1ua-sleep-mode/8059)._