# Getting Badgerboard to work with TTN

**URL:** <https://www.thethingsnetwork.org/forum/t/getting-badgerboard-to-work-with-ttn/5224>\
**Category:** End Devices (Nodes)\
**Created:** [February 5, 2017, 1:48pm UTC](https://www.thethingsnetwork.org/forum/t/getting-badgerboard-to-work-with-ttn/5224 "2017-02-05T13:48:51Z")\
**Posts on this page:** 1\
**Showing post:** 24

<div class="post-metadata">

**Author:** ![arjanvanb](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/arjanvanb/32/46626_2.png) [@arjanvanb](https://www.thethingsnetwork.org/forum/u/arjanvanb)\
**Post date:** [January 19, 2018, 1:50pm UTC](https://www.thethingsnetwork.org/forum/t/getting-badgerboard-to-work-with-ttn/5224/24 "2018-01-19T13:50:48Z")

</div>

A post was merged into an existing topic: [How to make RN2483 node use a fixed channel and spreading factor?](https://www.thethingsnetwork.org/forum/t/how-to-make-rn2483-node-use-a-fixed-channel-and-spreading-factor/2156)

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/getting-badgerboard-to-work-with-ttn/5224)._