# How to connect Utrecht E&A exhibition KISS LoRa to TTN?

**URL:** <https://www.thethingsnetwork.org/forum/t/how-to-connect-utrecht-e-a-exhibition-kiss-lora-to-ttn/7619>\
**Category:** End Devices (Nodes)\
**Created:** [June 1, 2017, 9:50pm UTC](https://www.thethingsnetwork.org/forum/t/how-to-connect-utrecht-e-a-exhibition-kiss-lora-to-ttn/7619 "2017-06-01T21:50:08Z")\
**Posts on this page:** 1\
**Showing post:** 26

<div class="post-metadata">

**Author:** ![galagaking](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/galagaking/32/45867_2.png) [@galagaking](https://www.thethingsnetwork.org/forum/u/galagaking)\
**Post date:** [June 2, 2017, 3:38pm UTC](https://www.thethingsnetwork.org/forum/t/how-to-connect-utrecht-e-a-exhibition-kiss-lora-to-ttn/7619/26 "2017-06-02T15:38:24Z")

</div>

Today i have tested the Kiss-Lora cycling to Eindhoven-centre using [ttnmapper.org](http://ttnmapper.org)  
 ![](https://www.thethingsnetwork.org/forum/uploads/default/original/2X/a/a289e927ddea9900dbc9f8e8adc84994655376cb.JPG)  
You see a very poor coverage, despite of the fact that there are enough gateways, and the ttnmapper map shows good coverage. If i compare the result with nearly the same route a week a go with a ‘standard’ RFM95 node with a short antenna, i have a much better connection.  
-\> EDIT: I was not satisfied with the result. I did another slightly different tour, removed the esd bag (LOL), and it was pretty good with the sensor in my hand: ![](https://www.thethingsnetwork.org/forum/uploads/default/original/2X/a/aec0b9cf556d343999c1f485804985767194fb70.JPG)

Feather M0-RFM95 combo:  
 ![](https://www.thethingsnetwork.org/forum/uploads/default/original/2X/a/a2bd3c9a74844daf201ccff480ab35bc6dbe1e8b.JPG)

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/how-to-connect-utrecht-e-a-exhibition-kiss-lora-to-ttn/7619)._