i just connected my multi tech conduit to TTN but am not getting any traffic ,and does anybody know how to make mdot communicate with TTN can someone please share the commands.
Thats what i get
admin@mtcdt:~#
admin@mtcdt:~# ##### 2018-07-26 09:58:10 GMT #####
admin@mtcdt:~# ### [UPSTREAM] ###
admin@mtcdt:~# # RF packets received by concentrator: 0
admin@mtcdt:~# # CRC_OK: 0.00%, CRC_FAIL: 0.00%, NO_CRC: 0.00%
admin@mtcdt:~# # RF packets forwarded: 0 (0 bytes)
admin@mtcdt:~# # PUSH_DATA datagrams sent: 0 (0 bytes)
admin@mtcdt:~# # PUSH_DATA acknowledged: 0.00%
admin@mtcdt:~# ### [DOWNSTREAM] ###
admin@mtcdt:~# # PULL_DATA sent: 0 (0.00% acknowledged)
admin@mtcdt:~# # PULL_RESP(onse) datagrams received: 0 (0 bytes)
admin@mtcdt:~# # RF packets sent to concentrator: 0 (0 bytes)
admin@mtcdt:~# # TX errors: 0
admin@mtcdt:~# ### BEACON IS DISABLED!
admin@mtcdt:~# ### [JIT] ###
admin@mtcdt:~# # INFO: JIT queue contains 0 packets.
admin@mtcdt:~# # INFO: JIT queue contains 0 beacons.
admin@mtcdt:~# ### GPS IS DISABLED!
admin@mtcdt:~# ### [PERFORMANCE] ###
admin@mtcdt:~# # Upstream radio packet quality: 0.00%.
admin@mtcdt:~# ### [ CONNECTIONS ] ###
admin@mtcdt:~# # bridge.us-west.thethings.network: Connected
admin@mtcdt:~# # Semtech status report send.
admin@mtcdt:~# ##### END #####
admin@mtcdt:~# 09:58:10 INFO: [TTN] bridge.us-west.thethings.network RTT 78
-bash: 09:58:10: command not found