# Join Request frequency outside of sub band **URL:** \ **Category:** SAMR34\ **Created:** [October 4, 2021, 5:27am UTC](https://www.thethingsnetwork.org/forum/t/join-request-frequency-outside-of-sub-band/52079 "2021-10-04T05:27:21Z")\ **Posts on this page:** 1\ **Showing post:** 7
**Author:** ![zygurt](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/zygurt/32/35697_2.png) [@zygurt](https://www.thethingsnetwork.org/forum/u/zygurt)\ **Post date:** [October 5, 2021, 1:02pm UTC](https://www.thethingsnetwork.org/forum/t/join-request-frequency-outside-of-sub-band/52079/7 "2021-10-05T13:02:06Z")
No worries. Here’s a link to the thread where I was figuring out what I needed to do. > [@Request - DevMode toggle or Reset Nonce button](https://www.thethingsnetwork.org/forum/t/request-devmode-toggle-or-reset-nonce-button/46408/18): > > Solved for now. Thank you everyone for your help. I went with the CLI route. The CH64 observation above doesn’t seem to be causing any problems without changing it. For later reference, this was the process I followed. Install CLI using the link posted above by @descartes in [Request - DevMode toggle or Reset Nonce button - #14 by descartes](https://www.thethingsnetwork.org/forum/t/request-devmode-toggle-or-reset-nonce-button/46408/14) Create a file called ttn-lw-cli.yml and save it in wherever you want. Go to [Addresses | The Things Stack for LoRaWAN](https://www.thethingsindustries.com/docs/getting-started/ttn/addresses/), select your appropriate cluster, … Note that there is a typo in the post, where a ’ should be a ". --- _[View the full topic](https://www.thethingsnetwork.org/forum/t/join-request-frequency-outside-of-sub-band/52079)._