# Kerlink LoRa IOT station 868 - verification

**URL:** <https://www.thethingsnetwork.org/forum/t/kerlink-lora-iot-station-868-verification/30210>\
**Category:** Kerlink Gateways\
**Created:** [September 24, 2019, 5:04pm UTC](https://www.thethingsnetwork.org/forum/t/kerlink-lora-iot-station-868-verification/30210 "2019-09-24T17:04:11Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![zanko](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/zanko/32/25844_2.png) [@zanko](https://www.thethingsnetwork.org/forum/u/zanko)\
**Post date:** [September 24, 2019, 5:04pm UTC](https://www.thethingsnetwork.org/forum/t/kerlink-lora-iot-station-868-verification/30210/1 "2019-09-24T17:04:11Z")

</div>

Hi!

I have mentioned Kerlink station installed in field. How can I check/verifiy if it is working properly - meaning it is connected into network?  
I can check it by the traffic/data transmission on SIM card, but is there also any other way?

Best regards, Žan

---

<div class="post-metadata">

**Author:** ![edme10](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/edme10/32/28963_2.png) [@edme10](https://www.thethingsnetwork.org/forum/u/edme10)\
**Post date:** [September 24, 2019, 6:06pm UTC](https://www.thethingsnetwork.org/forum/t/kerlink-lora-iot-station-868-verification/30210/2 "2019-09-24T18:06:12Z")

</div>

you can verify this by connecting a sensor to your network and verify the download messages on the gateway

---

<div class="post-metadata">

**Author:** ![system](https://www.thethingsnetwork.org/forum/uploads/default/original/3X/6/2/6250ea44fd2b0d6259489e1a92748df681e1f970.png) [@system](https://www.thethingsnetwork.org/forum/u/system)\
**Post date:** [May 26, 2023, 7:40am UTC](https://www.thethingsnetwork.org/forum/t/kerlink-lora-iot-station-868-verification/30210/3 "2023-05-26T07:40:31Z")

</div>

This topic was automatically closed 24 hours after the last reply. New replies are no longer allowed.