# Kerlink Station provisioning script failed (download lorad.json)

**URL:** <https://www.thethingsnetwork.org/forum/t/kerlink-station-provisioning-script-failed-download-lorad-json/53849>\
**Category:** Kerlink Gateways\
**Created:** [December 13, 2021, 10:08am UTC](https://www.thethingsnetwork.org/forum/t/kerlink-station-provisioning-script-failed-download-lorad-json/53849 "2021-12-13T10:08:33Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![UweVerwey](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/uweverwey/32/35697_2.png) [@UweVerwey](https://www.thethingsnetwork.org/forum/u/UweVerwey)\
**Post date:** [December 13, 2021, 10:08am UTC](https://www.thethingsnetwork.org/forum/t/kerlink-station-provisioning-script-failed-download-lorad-json/53849/1 "2021-12-13T10:08:34Z")

</div>

Hi everyone, I want to deploy Kerlink Stations (Firmware 3.6) into V3 and I’m using the provisioning script to install CPF and to connect the Gateway to V3.  
[https://www.thethingsindustries.com/docs/gateways/kerlinkwirnetstation/](https://www.thethingsindustries.com/docs/gateways/kerlinkwirnetstation/)

I created the Gateway on V3 and ran the provisioning script.  
CPF was installed successfully.  
The next step failed:  
./provision.sh ‘wirnet-station’ '10.x.y.z’ ‘eu1.cloud.thethings.network’ '7276FF000xxxxxxxx‘ 'NNSXS.FBLBQGLT3BBKIM66EXTT7Hxyz‘  
root@10.x.y.z.’s password:  
Downloading config from ‘eu1.cloud.thethings.network/api/v3/gcs/gateways/7276FF000xxxxxxx/kerlink-cpf/lorad/lorad.json’ to ‘/tmp/tmp.Uff9ZsFfEB/conf’ locally…  
Config download failed:  
curl: (22) The requested URL returned error: 400 Bad Request

Any hint how to solve this? Is the download of lorad.json no longer possible?  
Thank you.

Uwe

---

<div class="post-metadata">

**Author:** ![shanemc30](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/shanemc30/32/35697_2.png) [@shanemc30](https://www.thethingsnetwork.org/forum/u/shanemc30)\
**Post date:** [February 16, 2022, 3:24pm UTC](https://www.thethingsnetwork.org/forum/t/kerlink-station-provisioning-script-failed-download-lorad-json/53849/2 "2022-02-16T15:24:19Z")

</div>

Did you find any solution this problem. I am having the same problem when trying to provision our kerlink gateway

---

<div class="post-metadata">

**Author:** ![shanemc30](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/shanemc30/32/35697_2.png) [@shanemc30](https://www.thethingsnetwork.org/forum/u/shanemc30)\
**Post date:** [February 24, 2022, 10:10am UTC](https://www.thethingsnetwork.org/forum/t/kerlink-station-provisioning-script-failed-download-lorad-json/53849/3 "2022-02-24T10:10:29Z")

</div>

Any help with this issue would be greatly appreciated