# Laird Sentrius RS1xx Series

**URL:** <https://www.thethingsnetwork.org/forum/t/laird-sentrius-rs1xx-series/17492>\
**Category:** Product Support\
**Created:** [August 20, 2018, 10:00pm UTC](https://www.thethingsnetwork.org/forum/t/laird-sentrius-rs1xx-series/17492 "2018-08-20T22:00:00Z")\
**Posts on this page:** 1\
**Showing post:** 16

<div class="post-metadata">

**Author:** ![BoRRoZ](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/borroz/32/44234_2.png) [@BoRRoZ](https://www.thethingsnetwork.org/forum/u/BoRRoZ)\
**Post date:** [July 12, 2019, 10:15am UTC](https://www.thethingsnetwork.org/forum/t/laird-sentrius-rs1xx-series/17492/16 "2019-07-12T10:15:01Z")

</div>

isn’t that the same problem as discussed here and mentioned before… Laird is investigating ?

> [@Laird Sentrius RS1XX on TTN - Firmware update failure](https://www.thethingsnetwork.org/forum/t/laird-sentrius-rs1xx-on-ttn-firmware-update-failure/27762/2):
>
> Just a quick update - this issue was experienced when using an ios device running software version 12.3.2 which seems to have been the issue. When I installed the Sentrius Mobile app on an iPhone with ios version 12.3.1 (I assume anything lower will work as well) the units successfully updated their firmware without hanging up. No support from Laird but suspect incompatibility somewhere.

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/laird-sentrius-rs1xx-series/17492)._