# LED's show connected but console not **URL:** \ **Category:** TTKG - The Things Kickstarter Gateway\ **Created:** [May 10, 2020, 2:24pm UTC](https://www.thethingsnetwork.org/forum/t/leds-show-connected-but-console-not/36894 "2020-05-10T14:24:32Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![milo](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/milo/32/32690_2.png) [@milo](https://www.thethingsnetwork.org/forum/u/milo)\ **Post date:** [May 10, 2020, 2:24pm UTC](https://www.thethingsnetwork.org/forum/t/leds-show-connected-but-console-not/36894/1 "2020-05-10T14:24:32Z")
I was experimenting with some LoRa devices and suddenly my gateway stopped sending data. I don’t know if there is a relation between my devices and my disconnected (KickStarter) gateway. The LEDs on the gateway show that it is connected to a MQTT (first 4 LEDs are constantly on). Once in a while I see the 5th LED flashing indicating that there is traffic. Also after some reboots. Any ideas on how to debug this? Does the “Not connected” in the console mean that I don’t send LoRa data or does it mean that my gateways is not sending some kind of heartbeat? I’m wondering because it could be that the radio is defective. I’m developing the devices in close proximity to the gateway so possibly could be overloaded??? My devices are also not able to join anymore. So my gateways is not handling LoRa anymore. And it was al working fine upto about 15:00 Amsterdam time. Thanks, Milo ---
**Author:** ![kersing](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/kersing/32/44777_2.png) [@kersing](https://www.thethingsnetwork.org/forum/u/kersing)\ **Post date:** [May 10, 2020, 2:49pm UTC](https://www.thethingsnetwork.org/forum/t/leds-show-connected-but-console-not/36894/2 "2020-05-10T14:49:04Z")
EU is experiencing issues with gateways connected using the protocol the kickstarter gateway uses. Status and data are not working. So you’ll have to wait a while. ---
**Author:** ![milo](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/milo/32/32690_2.png) [@milo](https://www.thethingsnetwork.org/forum/u/milo)\ **Post date:** [May 10, 2020, 2:59pm UTC](https://www.thethingsnetwork.org/forum/t/leds-show-connected-but-console-not/36894/3 "2020-05-10T14:59:40Z")
Thank you very much. From the UART I see: ``` MON: APP Stack size: 3292 MON: LoRa Stack size: 3877 MON: heap usage: 280KB (281KB), free: 58KB LGMD:LORA: Accepted packet MQTT: Sending UPLINK OK LGMD:Rejected packet (0x11) LGMD:Rejected packet (0x11) MON: SYS Stack size: 2833 MON: TCPIP Stack size: 3793 MON: APP Stack size: 3292 MON: LoRa Stack size: 3877 MON: heap usage: 280KB (281KB), free: 58KB MQTT: Sending status packet ``` So luckely the LoRa is ok. Combined with your info I’ll just have to wait. I did not see any info on the twitter account. Where can I find info about ongoing issues? ---
**Author:** ![kersing](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/kersing/32/44777_2.png) [@kersing](https://www.thethingsnetwork.org/forum/u/kersing)\ **Post date:** [May 10, 2020, 3:38pm UTC](https://www.thethingsnetwork.org/forum/t/leds-show-connected-but-console-not/36894/4 "2020-05-10T15:38:00Z")
Latest information is (should be) available on slack. There are plenty of [messages](https://www.thethingsnetwork.org/forum/t/how-do-i-get-a-slack-invite/36353) on this forum on how to get an [invite](https://www.thethingsnetwork.org/forum/t/how-do-i-get-a-slack-invite/36353)… ---
**Author:** ![kersing](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/kersing/32/44777_2.png) [@kersing](https://www.thethingsnetwork.org/forum/u/kersing)\ **Post date:** [May 10, 2020, 4:04pm UTC](https://www.thethingsnetwork.org/forum/t/leds-show-connected-but-console-not/36894/5 "2020-05-10T16:04:25Z")
Traffic for mqtt forwarders in EU is working again.