# Lora Gateway Decoding

**URL:** <https://www.thethingsnetwork.org/forum/t/lora-gateway-decoding/36200>\
**Category:** Raspberry Pi Gateways\
**Created:** [April 16, 2020, 6:21pm UTC](https://www.thethingsnetwork.org/forum/t/lora-gateway-decoding/36200 "2020-04-16T18:21:48Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![mnaveedak](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/mnaveedak/32/25844_2.png) [@mnaveedak](https://www.thethingsnetwork.org/forum/u/mnaveedak)\
**Post date:** [April 16, 2020, 6:21pm UTC](https://www.thethingsnetwork.org/forum/t/lora-gateway-decoding/36200/1 "2020-04-16T18:21:48Z")

</div>

Hello Everyone,  
we are planning to use Lora sensors for control applications in cooperation with an industrial partner.

Sensor --\> Gateway --\> Cloud

Because the external Link to the cloud might not be always availabe, we want to implement a controller application directly on the gateway.  
Therefore, we have to decode Lora data packets directly on the Gatway.

We have the following questions:

- Is it possible to modify the software on the PoE enabled Raspberry Pi 3B+ based LoRaWAN® Gateway?
- Or, should we better set up our own gateway with separte components?

Anyone have example software on how to decode Lora packets on the gateway? Or tutorial/forum contributions?

---

<div class="post-metadata">

**Author:** ![kersing](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/kersing/32/44777_2.png) [@kersing](https://www.thethingsnetwork.org/forum/u/kersing)\
**Post date:** [April 16, 2020, 7:11pm UTC](https://www.thethingsnetwork.org/forum/t/lora-gateway-decoding/36200/2 "2020-04-16T19:11:46Z")

</div>

What you want is possible, but not TTN compatible. You need to implement the entries LoRaWAN back end yourself, check [ChirpStack](https://www.chirpstack.io/).
