# Making RFM95 breadboard friendly

**URL:** <https://www.thethingsnetwork.org/forum/t/making-rfm95-breadboard-friendly/8248>\
**Category:** Hardware\
**Created:** [July 4, 2017, 8:33am UTC](https://www.thethingsnetwork.org/forum/t/making-rfm95-breadboard-friendly/8248 "2017-07-04T08:33:24Z")\
**Posts on this page:** 1\
**Showing post:** 18

<div class="post-metadata">

**Author:** ![bluejedi](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/bluejedi/32/44639_2.png) [@bluejedi](https://www.thethingsnetwork.org/forum/u/bluejedi)\
**Post date:** [June 27, 2018, 1:10pm UTC](https://www.thethingsnetwork.org/forum/t/making-rfm95-breadboard-friendly/8248/18 "2018-06-27T13:10:04Z")

</div>

Another option for Arduino UNO (and compatibles) is this special dual-pitch prototyping PCB shield:

> [@The BARGAIN basement part 4](https://www.thethingsnetwork.org/forum/t/the-bargain-basement-part-4/13560/116):
>
> Dual-pitch prototyping PCB shield for Arduino Uno (and compatibles) [[54mm%20Pitch%20Prototype%20PCB%20for%20Arduino%20UNO]](https://www.aliexpress.com/item/Combo-2mm-2-54mm-Pitch-Prototype-PCB-for-ArduinoUNO-R3-Shield-Board-DIY-bte16-07-15MM/32673829711.html) Can be used for adding LoRa modules with 2mm pitch (RFM95W, SX1276, HPD13A) and components with regular 2.54mm pitch (OLED display, sensors, buttons, etc.). For a version with standard male headers (cheaper) check [here](https://www.aliexpress.com/item/Combo-2mm-2-54mm-Pitch-Prototype-PCB-for-ArduinoUNO-R3-Shield-Board-DIY-bte16-07-pins/32675260756.html).

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/making-rfm95-breadboard-friendly/8248)._