# Multitech Conduit with GNSS module

**URL:** <https://www.thethingsnetwork.org/forum/t/multitech-conduit-with-gnss-module/11960>\
**Category:** MultiTech Gateways\
**Created:** [January 22, 2018, 9:49pm UTC](https://www.thethingsnetwork.org/forum/t/multitech-conduit-with-gnss-module/11960 "2018-01-22T21:49:40Z")\
**Posts on this page:** 1\
**Showing post:** 13

<div class="post-metadata">

**Author:** ![Osman](https://www.thethingsnetwork.org/forum/letter_avatar_proxy/v4/letter/o/f14d63/32.png) [@Osman](https://www.thethingsnetwork.org/forum/u/Osman)\
**Post date:** [February 19, 2018, 3:55pm UTC](https://www.thethingsnetwork.org/forum/t/multitech-conduit-with-gnss-module/11960/13 "2018-02-19T15:55:45Z")

</div>

Hello,

Thanks a lot for your kind support 🙂 , I have edited the “local\_config.json” and added the following two lines.

> “gps”: true,  
> “gps\_tty\_path”:“/dev/ttyXRUSB2”,

On the TTN application payload, now the GPS coordinates are parsed along with time field in nanoseconds.  
I then installed the same packet forwarder on another aep multitech conduit , however, here the time field is always in microseconds (rarely it shows nano seconds). Do you know how to dig in to this matter?

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/multitech-conduit-with-gnss-module/11960)._