# Nothing shows up on the log (Using Multitech conduit gateway) **URL:** \ **Category:** MultiTech Gateways\ **Created:** [March 7, 2018, 11:48pm UTC](https://www.thethingsnetwork.org/forum/t/nothing-shows-up-on-the-log-using-multitech-conduit-gateway/13066 "2018-03-07T23:48:51Z")\ **Posts on this page:** 18\ **Page:** 1
**Author:** ![Neosenjamied](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/neosenjamied/32/25844_2.png) [@Neosenjamied](https://www.thethingsnetwork.org/forum/u/Neosenjamied)\ **Post date:** [March 7, 2018, 11:48pm UTC](https://www.thethingsnetwork.org/forum/t/nothing-shows-up-on-the-log-using-multitech-conduit-gateway/13066/1 "2018-03-07T23:48:51Z")
Hello, I am trying to use my Multitech conduit gateway as a packet forwarder. After following the procedure for gateway setup with this: [https://www.thethingsnetwork.org/docs/gateways/multitech/mlinux.html](https://www.thethingsnetwork.org/docs/gateways/multitech/mlinux.html) On the things network console, the gateway is connected. But my tag is not ringing in and the Lora packet forward log shows the gateway gets nearly nothing. Most log looks like this: _\*\*_ **##### 2018-03-07 22:14:13 GMT #####** _\*\*_ _\*\*_**### [UPSTREAM] ###**_\*\*_ _\*\*_ **# RF packets received by concentrator: 1** _\*\*_ _\*\*_ **# CRC\_OK: 0.00%, CRC\_FAIL: 100.00%, NO\_CRC: 0.00%** _\*\*_ _\*\*_**# RF packets forwarded: 0 (0 bytes)**_\*\*_ _\*\*_**# PUSH\_DATA datagrams sent: 0 (0 bytes)**_\*\*_ _\*\*_ **# PUSH\_DATA acknowledged: 0.00%** _\*\*_ _\*\*_**### [DOWNSTREAM] ###**_\*\*_ _\*\*_**# PULL\_DATA sent: 0 (0.00% acknowledged)**_\*\*_ _\*\*_**# PULL\_RESP(onse) datagrams received: 0 (0 bytes)**_\*\*_ _\*\*_**# RF packets sent to concentrator: 0 (0 bytes)**_\*\*_ _\*\*_ **# TX errors: 0** _\*\*_ _\*\*_**### BEACON IS DISABLED! \_\_ \_ **_** ### [JIT] ### **_** \_ \_ **_** # INFO: JIT queue contains 0 packets. **_** \_ \_ **_** # INFO: JIT queue contains 0 beacons. **_** \_ \_ **_\*\*### GPS IS DISABLED! \*\*_** \_ \_ **_** ### [PERFORMANCE] ### **_** \_ \_ **_** # Upstream radio packet quality: 0.00%. **_** \_ \_ **_** ### [CONNECTIONS] ### **_** \_ \_ **_** # bridge.us-west.thethings.network: Connected **_** \_ \_ **_\*\*# Semtech status report send. \*\*_** \_ \_ **_** ##### END ##### **_** \_ \_ **_** 16:14:13 INFO: [TTN] bridge.us-west.thethings.network RTT 54 **_** \_ \_ **_** 16:14:13 INFO: [TTN] send status success for bridge.us-west.thethings.network **_** \_ \_ **_** 16:14:22 INFO: Disabling GPS mode for concentrator’s counter… **_** \_ \_ **_** 16:14:22 INFO: host/sx1301 time offset=(1520456888s:946686碌s) - drift=-721碌s **_** \_ \_ **_** 16:14:22 INFO: Enabling GPS mode for concentrator’s counter.**_\*\*\_ _\*\*_ **##### 2018-03-07 22:14:43 GMT #####** _\*\*_ _\*\*_**### [UPSTREAM] ###**_\*\*_ _\*\*_ **# RF packets received by concentrator: 0** _\*\*_ _\*\*_ **# CRC\_OK: 0.00%, CRC\_FAIL: 0.00%, NO\_CRC: 0.00%** _\*\*_ _\*\*_**# RF packets forwarded: 0 (0 bytes)**_\*\*_ _\*\*_**# PUSH\_DATA datagrams sent: 0 (0 bytes)**_\*\*_ _\*\*_ **# PUSH\_DATA acknowledged: 0.00%** _\*\*_ _\*\*_**### [DOWNSTREAM] ###**_\*\*_ _\*\*_**# PULL\_DATA sent: 0 (0.00% acknowledged)**_\*\*_ _\*\*_**# PULL\_RESP(onse) datagrams received: 0 (0 bytes)**_\*\*_ _\*\*_**# RF packets sent to concentrator: 0 (0 bytes)**_\*\*_ _\*\*_ **# TX errors: 0** _\*\*_ _\*\*_**### BEACON IS DISABLED! \_\_ \_ **_** ### [JIT] ### **_** \_ \_ **_** # INFO: JIT queue contains 0 packets. **_** \_ \_ **_** # INFO: JIT queue contains 0 beacons. **_** \_ \_ **_\*\*### GPS IS DISABLED! \*\*_** \_ \_ **_** ### [PERFORMANCE] ### **_** \_ \_ **_** # Upstream radio packet quality: 0.00%. **_** \_ \_ **_** ### [CONNECTIONS] ### **_** \_ \_ **_** # bridge.us-west.thethings.network: Connected **_** \_ \_ **_\*\*# Semtech status report send. \*\*_** \_ \_ **_** ##### END ##### **_** \_ \_ **_** 16:14:43 INFO: [TTN] bridge.us-west.thethings.network RTT 52 **_** \_ \_ **_** 16:14:43 INFO: [TTN] send status success for bridge.us-west.thethings.network**_\*\*\_ I used the tag and the gateway pointing to Semtech cloud website before, it was working fine. Does anyone know what is going on? Thanks a lot. ---
**Author:** ![BoRRoZ](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/borroz/32/44234_2.png) [@BoRRoZ](https://www.thethingsnetwork.org/forum/u/BoRRoZ)\ **Post date:** [March 8, 2018, 9:16am UTC](https://www.thethingsnetwork.org/forum/t/nothing-shows-up-on-the-log-using-multitech-conduit-gateway/13066/2 "2018-03-08T09:16:20Z")
what is a ‘tag’ and did you register it, did you register an application with that 'tag ? **[search](https://www.thethingsnetwork.org/forum/search?q=multitech%20conduit%20)** multitech **[device registration](https://www.thethingsnetwork.org/docs/devices/registration.html)** ---
**Author:** ![Neosenjamied](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/neosenjamied/32/25844_2.png) [@Neosenjamied](https://www.thethingsnetwork.org/forum/u/Neosenjamied)\ **Post date:** [March 8, 2018, 3:37pm UTC](https://www.thethingsnetwork.org/forum/t/nothing-shows-up-on-the-log-using-multitech-conduit-gateway/13066/3 "2018-03-08T15:37:51Z")
It is a device in the application. ---
**Author:** ![BoRRoZ](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/borroz/32/44234_2.png) [@BoRRoZ](https://www.thethingsnetwork.org/forum/u/BoRRoZ)\ **Post date:** [March 8, 2018, 3:57pm UTC](https://www.thethingsnetwork.org/forum/t/nothing-shows-up-on-the-log-using-multitech-conduit-gateway/13066/4 "2018-03-08T15:57:28Z")
what type ? and is it joining OTAA or ABP ---
**Author:** ![Neosenjamied](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/neosenjamied/32/25844_2.png) [@Neosenjamied](https://www.thethingsnetwork.org/forum/u/Neosenjamied)\ **Post date:** [March 8, 2018, 4:08pm UTC](https://www.thethingsnetwork.org/forum/t/nothing-shows-up-on-the-log-using-multitech-conduit-gateway/13066/5 "2018-03-08T16:08:45Z")
It is joining OTAA ---
**Author:** ![BoRRoZ](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/borroz/32/44234_2.png) [@BoRRoZ](https://www.thethingsnetwork.org/forum/u/BoRRoZ)\ **Post date:** [March 8, 2018, 4:17pm UTC](https://www.thethingsnetwork.org/forum/t/nothing-shows-up-on-the-log-using-multitech-conduit-gateway/13066/6 "2018-03-08T16:17:10Z")
and what type is it ? you have full control to change all the keys ? ---
**Author:** ![Neosenjamied](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/neosenjamied/32/25844_2.png) [@Neosenjamied](https://www.thethingsnetwork.org/forum/u/Neosenjamied)\ **Post date:** [March 8, 2018, 4:27pm UTC](https://www.thethingsnetwork.org/forum/t/nothing-shows-up-on-the-log-using-multitech-conduit-gateway/13066/7 "2018-03-08T16:27:46Z")
It is a transceiver with Semtech sx1272 and TS80000 building in. I can control the APP key ---
**Author:** ![BoRRoZ](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/borroz/32/44234_2.png) [@BoRRoZ](https://www.thethingsnetwork.org/forum/u/BoRRoZ)\ **Post date:** [March 8, 2018, 4:35pm UTC](https://www.thethingsnetwork.org/forum/t/nothing-shows-up-on-the-log-using-multitech-conduit-gateway/13066/8 "2018-03-08T16:35:44Z")
So you connected a SX1272 to the TS80000 and wrote the code yourself am I right ? its normally not an LoRaWAN connected device. ---
**Author:** ![Neosenjamied](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/neosenjamied/32/25844_2.png) [@Neosenjamied](https://www.thethingsnetwork.org/forum/u/Neosenjamied)\ **Post date:** [March 8, 2018, 4:46pm UTC](https://www.thethingsnetwork.org/forum/t/nothing-shows-up-on-the-log-using-multitech-conduit-gateway/13066/9 "2018-03-08T16:46:27Z")
Yes, I use my own code to control the device. I used the same device and gateway pointing to Semtech cloud, which is similar to The Things Network console. It was working fine. ---
**Author:** ![BoRRoZ](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/borroz/32/44234_2.png) [@BoRRoZ](https://www.thethingsnetwork.org/forum/u/BoRRoZ)\ **Post date:** [March 8, 2018, 4:49pm UTC](https://www.thethingsnetwork.org/forum/t/nothing-shows-up-on-the-log-using-multitech-conduit-gateway/13066/10 "2018-03-08T16:49:06Z")
and you used the right adresses / port ? ---
**Author:** ![Neosenjamied](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/neosenjamied/32/25844_2.png) [@Neosenjamied](https://www.thethingsnetwork.org/forum/u/Neosenjamied)\ **Post date:** [March 8, 2018, 4:51pm UTC](https://www.thethingsnetwork.org/forum/t/nothing-shows-up-on-the-log-using-multitech-conduit-gateway/13066/11 "2018-03-08T16:51:51Z")
Do you mean I need to specify the port corresponding to somewhere? ---
**Author:** ![BoRRoZ](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/borroz/32/44234_2.png) [@BoRRoZ](https://www.thethingsnetwork.org/forum/u/BoRRoZ)\ **Post date:** [March 8, 2018, 5:00pm UTC](https://www.thethingsnetwork.org/forum/t/nothing-shows-up-on-the-log-using-multitech-conduit-gateway/13066/12 "2018-03-08T17:00:26Z")
and can you send a packet from the console… does that show in your application ? ![testpacket](https://www.thethingsnetwork.org/forum/uploads/default/original/2X/7/770de0c1e47bd363a4a8116f21178b1e39456c08.jpg) ---
**Author:** ![Neosenjamied](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/neosenjamied/32/25844_2.png) [@Neosenjamied](https://www.thethingsnetwork.org/forum/u/Neosenjamied)\ **Post date:** [March 8, 2018, 5:04pm UTC](https://www.thethingsnetwork.org/forum/t/nothing-shows-up-on-the-log-using-multitech-conduit-gateway/13066/13 "2018-03-08T17:04:15Z")
Yes I can see the data. [https://drive.google.com/open?id=1bsZ1rkPGnhH6JFDPoHPNMCTsPuc6LN-n](https://drive.google.com/open?id=1bsZ1rkPGnhH6JFDPoHPNMCTsPuc6LN-n) ---
**Author:** ![BoRRoZ](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/borroz/32/44234_2.png) [@BoRRoZ](https://www.thethingsnetwork.org/forum/u/BoRRoZ)\ **Post date:** [March 8, 2018, 5:07pm UTC](https://www.thethingsnetwork.org/forum/t/nothing-shows-up-on-the-log-using-multitech-conduit-gateway/13066/14 "2018-03-08T17:07:27Z")
no I was talking about your gateway settings. anyway, if you can’t send a packet from your console, simulating your node, to your application then there is something wrong with the registration ---
**Author:** ![Neosenjamied](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/neosenjamied/32/25844_2.png) [@Neosenjamied](https://www.thethingsnetwork.org/forum/u/Neosenjamied)\ **Post date:** [March 8, 2018, 5:11pm UTC](https://www.thethingsnetwork.org/forum/t/nothing-shows-up-on-the-log-using-multitech-conduit-gateway/13066/15 "2018-03-08T17:11:20Z")
Sorry, the image didn’t show up. I can see the data with your steps. [https://drive.google.com/open?id=1bsZ1rkPGnhH6JFDPoHPNMCTsPuc6LN-n](https://drive.google.com/open?id=1bsZ1rkPGnhH6JFDPoHPNMCTsPuc6LN-n) ---
**Author:** ![Neosenjamied](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/neosenjamied/32/25844_2.png) [@Neosenjamied](https://www.thethingsnetwork.org/forum/u/Neosenjamied)\ **Post date:** [March 8, 2018, 9:09pm UTC](https://www.thethingsnetwork.org/forum/t/nothing-shows-up-on-the-log-using-multitech-conduit-gateway/13066/16 "2018-03-08T21:09:39Z")
![11111](https://www.thethingsnetwork.org/forum/uploads/default/original/2X/f/f52dbd2a0d3087c39dbc9f0118c776fa3d1d7ad0.PNG) ---
**Author:** ![BoRRoZ](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/borroz/32/44234_2.png) [@BoRRoZ](https://www.thethingsnetwork.org/forum/u/BoRRoZ)\ **Post date:** [March 8, 2018, 9:45pm UTC](https://www.thethingsnetwork.org/forum/t/nothing-shows-up-on-the-log-using-multitech-conduit-gateway/13066/17 "2018-03-08T21:45:00Z")
ok… then the problem is probably in your code. maybe the byte order (LSB) of the keys ? the channel settings ---
**Author:** ![Neosenjamied](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/neosenjamied/32/25844_2.png) [@Neosenjamied](https://www.thethingsnetwork.org/forum/u/Neosenjamied)\ **Post date:** [March 9, 2018, 3:38pm UTC](https://www.thethingsnetwork.org/forum/t/nothing-shows-up-on-the-log-using-multitech-conduit-gateway/13066/18 "2018-03-09T15:38:16Z")
I set the Appkey symmetric (6 bytes 0x01 + 4 bytes 0x00 + 6 bytes 0x01). So order shouldn’t be an issue. I will check up the channel settings in the code. Is there any regulation of channel settings from the console? Thanks