# Otaa join\_accept message not received by seeeduino node

**URL:** <https://www.thethingsnetwork.org/forum/t/otaa-join-accept-message-not-received-by-seeeduino-node/14221>\
**Category:** LMIC\
**Created:** [May 15, 2018, 9:40pm UTC](https://www.thethingsnetwork.org/forum/t/otaa-join-accept-message-not-received-by-seeeduino-node/14221 "2018-05-15T21:40:42Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![thilko](https://www.thethingsnetwork.org/forum/letter_avatar_proxy/v4/letter/t/4af34b/32.png) [@thilko](https://www.thethingsnetwork.org/forum/u/thilko)\
**Post date:** [May 23, 2018, 5:40am UTC](https://www.thethingsnetwork.org/forum/t/otaa-join-accept-message-not-received-by-seeeduino-node/14221/4 "2018-05-23T05:40:39Z")

</div>

No, unfortunately not. I changed the code according to the comments from @kersing and I was at least able to the join ack responses in TTN and on the gateway - but they are not received by the node.

I changed the firmware to the actual version(2.1.16) and now the join requests didn´t even reach the gateway. @brady_aiello Since I think something is wrong on the node - do you know any more debugging possibilities there?

I am also wondering if my setup of gateway and node is caused some of the problems, because they are located in the same room?

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/otaa-join-accept-message-not-received-by-seeeduino-node/14221)._