# Product Announcements **URL:** \ **Category:** Uncategorized\ **Created:** [June 7, 2017, 5:58am UTC](https://www.thethingsnetwork.org/forum/t/product-announcements/7760 "2017-06-07T05:58:25Z")\ **Posts on this page:** 12\ **Page:** 6
**Author:** ![SkyLab](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/skylab/32/37459_2.png) [@SkyLab](https://www.thethingsnetwork.org/forum/u/SkyLab)\ **Post date:** [November 14, 2020, 12:51pm UTC](https://www.thethingsnetwork.org/forum/t/product-announcements/7760/206 "2020-11-14T12:51:49Z")
SEMTECH LR1110 based LoRa developer board. The last few months Skylab has been quietly working on a new small prototyping board based on the [Semtech LoRa®](https://www.linkedin.com/company/semtechlora/) LR1110 LoRa Edge™ Asset Management Platform. This ultra-low-power prototyping board equipped with LoRa LoRaWAN, GPS / GNSS, WiFi geolocation, for precise in and outdoor positioning, capable of measuring Temperature, Humidity, Barometric pressure, Acceleration and Magnetic field. This LoRa developer board is Arduino IDE compatible and WEMOS pin-compatible which gives extra possibilities. Our team has been working very hard to optimize the last design details and we are happy to announce that we start the first production. If you have any questions about our new product please feel free to contact us or visit the webpage: > **[SkyLab LR1110 LoRa Edge™ | Small Form-Factor](https://www.skylab.nl/lora-edge-lr1110/)** > > A Small Form-Factor prototyping LoRa board for the most use cases to create IoT solutions based on the SEMTECH LR1110 LoRa Edge™. ---
**Author:** ![SkyLab](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/skylab/32/37459_2.png) [@SkyLab](https://www.thethingsnetwork.org/forum/u/SkyLab)\ **Post date:** [November 27, 2020, 5:00pm UTC](https://www.thethingsnetwork.org/forum/t/product-announcements/7760/207 "2020-11-27T17:00:33Z")
LR1110 LoRa developer board UPDATE. Today we started the production of the first (small) batch of the [New LR1110](https://www.skylab.nl/lora-edge-lr1110/) board. With this development we are one step closer to full-scale production. The first batch of the new LR1110 based developer board was very promising and the PCB is nearly perfect but here at skylab, we strive for perfection. which is why will test and inspect these first boards extremely thoroughly to find and improve every imperfection. we are very excited to start working with the brand new LR1110. ![lr1110skylab](https://www.thethingsnetwork.org/forum/uploads/default/original/3X/c/d/cd20837fd3c1278c3ac87ba7d7add97abfe5a372.jpeg) ---
**Author:** ![descartes](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/descartes/32/47220_2.png) [@descartes](https://www.thethingsnetwork.org/forum/u/descartes)\ **Post date:** [November 27, 2020, 5:02pm UTC](https://www.thethingsnetwork.org/forum/t/product-announcements/7760/208 "2020-11-27T17:02:46Z")
> [@SkyLab](#): > > first batch of The new chip was very promising and nearly perfect What were the imperfections in the chip - I’d assume you’d not be able to correct those yourself? ---
**Author:** ![SkyLab](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/skylab/32/37459_2.png) [@SkyLab](https://www.thethingsnetwork.org/forum/u/SkyLab)\ **Post date:** [November 27, 2020, 6:21pm UTC](https://www.thethingsnetwork.org/forum/t/product-announcements/7760/210 "2020-11-27T18:21:50Z")
Hi @descartes , In the chip we didn’t find any imperfections I have edited the message it was a bit confusing. On the PCB we could expect some imperfections but so far so good 💪 ---
**Author:** ![jezd](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/jezd/32/46461_2.png) [@jezd](https://www.thethingsnetwork.org/forum/u/jezd)\ **Post date:** [November 28, 2020, 3:26pm UTC](https://www.thethingsnetwork.org/forum/t/product-announcements/7760/211 "2020-11-28T15:26:40Z")
any pricing news? working code? sleep current? ---
**Author:** ![SkyLab](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/skylab/32/37459_2.png) [@SkyLab](https://www.thethingsnetwork.org/forum/u/SkyLab)\ **Post date:** [November 29, 2020, 8:35am UTC](https://www.thethingsnetwork.org/forum/t/product-announcements/7760/212 "2020-11-29T08:35:55Z")
Hi @jezd Our price for the first productions will be around € 125,- when we start mass production the price will drop around € 99,- Next week (Late November) we start with the early adapters, enthusiast programmers and (our) engineers to test first codes, and measure power consumptions in various modes. Shortly after (December) we start to publish the first (beta’s) in Arduino code on GitHub. A limited number of boards are available for those interested in contributing. [On our website you can find the more info, roadmap, and register.](https://www.skylab.nl/lora-edge-lr1110/) ---
**Author:** ![AlainD](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/alaind/32/35697_2.png) [@AlainD](https://www.thethingsnetwork.org/forum/u/AlainD)\ **Post date:** [November 29, 2020, 10:32pm UTC](https://www.thethingsnetwork.org/forum/t/product-announcements/7760/213 "2020-11-29T22:32:40Z")
Nice 2 remarks : - doesn’t give " Wi-Fi AP MAC-adresscanner" privacy problems in the EU? - I know that " BME280-sensor" type of sensors are sensitive to the “heat” from the PCB of even placement inside a box. Did you anticipate it? 1 question 🙂 I’m getting fond of qwiic connectors for prototyping. Is I²C available and are the needed pins close (3.3V,GND,address and data). ---
**Author:** ![lyanchev](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/lyanchev/32/35697_2.png) [@lyanchev](https://www.thethingsnetwork.org/forum/u/lyanchev)\ **Post date:** [November 30, 2020, 7:21am UTC](https://www.thethingsnetwork.org/forum/t/product-announcements/7760/214 "2020-11-30T07:21:28Z")
Dear All, For those of you who work on Smart Buildings projects (residential, commercial, municipal) and want to save approx 30% heating costs, take a look at Vicki - LoRaWAN Smart Radiator Thermostat: [MClimate Vicki LoRaWAN Datasheet.pdf](https://www.thethingsnetwork.org/forum/uploads/short-url/dX0WsmG7g8f6SiF6waThRNJWGTy.pdf) (993.4 KB) Vicki is already proven with tens of thousands installed in many types of buildings. Best regards, Lyubomir ---
**Author:** ![SkyLab](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/skylab/32/37459_2.png) [@SkyLab](https://www.thethingsnetwork.org/forum/u/SkyLab)\ **Post date:** [November 30, 2020, 8:36am UTC](https://www.thethingsnetwork.org/forum/t/product-announcements/7760/215 "2020-11-30T08:36:04Z")
Hi @AlainD, Wi-Fi AP mac address scanning is already being done by allot of smart devices to determine there approximate location before the GPS/GNSS kicks in. Privacy wise there are some protections in place like you need at least 2 different mac addresses to get a valid response. For the BME280 we choice to put it on the Battery/Solar/MicroUSB side so there are not a lot of components close to it but there could be some heat dissipation when charging the battery for example. I attached a picture showing the BME280 placement and the pin definitions. ![PB270357](https://www.thethingsnetwork.org/forum/uploads/default/original/3X/b/e/bece850c804240c16c8e7546e51056923d822952.jpeg) Kind Regards, ---
**Author:** ![kersing](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/kersing/32/44777_2.png) [@kersing](https://www.thethingsnetwork.org/forum/u/kersing)\ **Post date:** [January 17, 2021, 11:41pm UTC](https://www.thethingsnetwork.org/forum/t/product-announcements/7760/216 "2021-01-17T23:41:36Z")
For new product announcements: Please create a new topic and use the new [‘Product Announcements’](https://www.thethingsnetwork.org/forum/c/Announcements/101) category. ---
**Author:** ![kersing](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/kersing/32/44777_2.png) [@kersing](https://www.thethingsnetwork.org/forum/u/kersing)\ **Post date:** [January 17, 2021, 11:41pm UTC](https://www.thethingsnetwork.org/forum/t/product-announcements/7760/217 "2021-01-17T23:41:43Z")
---
**Author:** ![danielisrael](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/danielisrael/32/35697_2.png) [@danielisrael](https://www.thethingsnetwork.org/forum/u/danielisrael)\ **Post date:** [October 13, 2021, 10:25am UTC](https://www.thethingsnetwork.org/forum/t/product-announcements/7760/218 "2021-10-13T10:25:35Z")
Dear all, hope everything is good. I supply LoRaWAN signal generator for test purpose. We have decided to develop LoRaWAN field analyzer in Indian market. Please click the below link and fill the google form [https://docs.google.com/forms/d/1jiAfuf\_m2v8QKNSIUAmxCyyiAd5ggz0Y2DVtPZ\_5Cu8/prefill](https://docs.google.com/forms/d/1jiAfuf_m2v8QKNSIUAmxCyyiAd5ggz0Y2DVtPZ_5Cu8/prefill) This short survey will help us to serve better. Thank you for your time [Previous page](https://www.thethingsnetwork.org/forum/t/product-announcements/7760.md?page=5)