# Pycom Pygate **URL:** \ **Category:** Gateways\ **Created:** [July 31, 2020, 12:23pm UTC](https://www.thethingsnetwork.org/forum/t/pycom-pygate/38914 "2020-07-31T12:23:30Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![Jeff-UK](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/jeff-uk/32/35697_2.png) [@Jeff-UK](https://www.thethingsnetwork.org/forum/u/Jeff-UK)\ **Post date:** [July 31, 2020, 1:23pm UTC](https://www.thethingsnetwork.org/forum/t/pycom-pygate/38914/2 "2020-07-31T13:23:38Z")
Have you searched the forum for other possible users? I remembered Tim @cultsdotelecomatgmai posting about his new arrival (not a new baby!), perhaps he has had a bit of time to play/evaluate? > [@New GW from Pycom: Pygate](https://www.thethingsnetwork.org/forum/t/new-gw-from-pycom-pygate/32530/4): > > Well, 14 months after I ordered and paid for a Pycom pygate it arrived 2 weeks ago. It’s up and running on TTN using the legacy pkt forwarder. It’s cheap; The pygate itself is Euro50. The Lopy4 I’m using to run the code is Euro35 but it only needs a Wipy3 at Euro20. It’s small; this picture is shown alongside a Raspberry Pi. I have added a battery and a Taoglas PC.81 antenna. It uses WiFi for backhaul. An ethernet interface is available as an option. From unboxing to having it up and runnin… I was promised a couple of eval units at last TTN Conf but no one followed up so cant advise personally though it looked promising and their other products have good reputation with apparent good support from Fred & the team… --- _[View the full topic](https://www.thethingsnetwork.org/forum/t/pycom-pygate/38914)._