# RAK2245 PIHAT on Pi4 gateway won't connect **URL:** \ **Category:** Raspberry Pi Gateways\ **Created:** [August 16, 2022, 11:50am UTC](https://www.thethingsnetwork.org/forum/t/rak2245-pihat-on-pi4-gateway-wont-connect/58480 "2022-08-16T11:50:19Z")\ **Posts on this page:** 1\ **Showing post:** 29
**Author:** ![Jeff-UK](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/jeff-uk/32/35697_2.png) [@Jeff-UK](https://www.thethingsnetwork.org/forum/u/Jeff-UK)\ **Post date:** [April 1, 2024, 1:57pm UTC](https://www.thethingsnetwork.org/forum/t/rak2245-pihat-on-pi4-gateway-wont-connect/58480/29 "2024-04-01T13:57:46Z")
> [@tzalex](#): > > I can see that rpi’s GPIO13 is the corresponding pin for RAK2245’s `RESET_GPS` pin At this point GPS is a ‘dont care’ from TTN operation perspective, and the key task of starting the concentrator, so what you want is GPIO17 = Pi HAT 40 pin connector pin 11 for the concentrator reset (SX130x reset) as shown ![image](https://www.thethingsnetwork.org/forum/uploads/default/original/3X/9/8/9856b0c3e64f7739661c395570e670c142a26f3e.png) ![image](https://www.thethingsnetwork.org/forum/uploads/default/original/3X/b/f/bf804e60cc5e11559cac2526bedc0b6f4cc68c91.jpeg) I dont use this software for my systems specifically so can’t tell you from memory where to look (did know a while back but caches flushed!), last time I played with it was (I think) the Things Summer Academy, or the months following, a couple of years back! and dont have time right now to go digging… others may step in quickly and point you in the right direction… --- _[View the full topic](https://www.thethingsnetwork.org/forum/t/rak2245-pihat-on-pi4-gateway-wont-connect/58480)._