# RAK2287 + RPI4 + BalenaCloud connection issues

**URL:** <https://www.thethingsnetwork.org/forum/t/rak2287-rpi4-balenacloud-connection-issues/50747>\
**Category:** Raspberry Pi Gateways\
**Created:** [August 18, 2021, 10:35am UTC](https://www.thethingsnetwork.org/forum/t/rak2287-rpi4-balenacloud-connection-issues/50747 "2021-08-18T10:35:05Z")\
**Posts on this page:** 1\
**Showing post:** 11

<div class="post-metadata">

**Author:** ![ketil](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/ketil/32/42216_2.png) [@ketil](https://www.thethingsnetwork.org/forum/u/ketil)\
**Post date:** [September 17, 2021, 2:10pm UTC](https://www.thethingsnetwork.org/forum/t/rak2287-rpi4-balenacloud-connection-issues/50747/11 "2021-09-17T14:10:23Z")

</div>

Thanks to @TonySmith’s [post mentioned above](https://www.thethingsnetwork.org/forum/t/experiece-and-solutions-with-the-sx1302-packet-forwarder/37975), I was able to get rid of the first error:

`./reset_lgw.sh: 24: echo: echo: I/O error`

The trick was removing power enable-lines from reset\_lgw.sh did, which Tony mentioned in his post. One error is remaining, however:

`ERROR: Failed to stop TX trigger`

Any information about this error would be appreciated. Is it safe to disregard, or will it affect the gateway performance?

Kind regards,  
Ketil

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/rak2287-rpi4-balenacloud-connection-issues/50747)._