# RAK831 vs IC880A-SPI

**URL:** <https://www.thethingsnetwork.org/forum/t/rak831-vs-ic880a-spi/12423>\
**Category:** Raspberry Pi Gateways\
**Created:** [February 7, 2018, 4:04pm UTC](https://www.thethingsnetwork.org/forum/t/rak831-vs-ic880a-spi/12423 "2018-02-07T16:04:04Z")\
**Posts on this page:** 1\
**Showing post:** 14

<div class="post-metadata">

**Author:** ![kersing](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/kersing/32/44777_2.png) [@kersing](https://www.thethingsnetwork.org/forum/u/kersing)\
**Post date:** [March 13, 2018, 10:16pm UTC](https://www.thethingsnetwork.org/forum/t/rak831-vs-ic880a-spi/12423/14 "2018-03-13T22:16:04Z")

</div>

@oisecnet On your blog post you mention integrating the new Semtech software into the ttn-zh build. Why not move to [JPMeijers resin.io](https://github.com/jpmeijers/ttn-resin-gateway-rpi) build to switch to a packet forwarder with the TTN native protocol build in? (MP Forwarder uses the latest Semtech libraries.)

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/rak831-vs-ic880a-spi/12423)._