# Request gateway traffic over time period

**URL:** <https://www.thethingsnetwork.org/forum/t/request-gateway-traffic-over-time-period/59105>\
**Category:** Gateways\
**Tags:** gateways\
**Created:** [September 30, 2022, 8:37am UTC](https://www.thethingsnetwork.org/forum/t/request-gateway-traffic-over-time-period/59105 "2022-09-30T08:37:32Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![Jeff-UK](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/jeff-uk/32/35697_2.png) [@Jeff-UK](https://www.thethingsnetwork.org/forum/u/Jeff-UK)\
**Post date:** [September 30, 2022, 9:13am UTC](https://www.thethingsnetwork.org/forum/t/request-gateway-traffic-over-time-period/59105/4 "2022-09-30T09:13:39Z")

</div>

That works within the same “session” however care needed as where the old V2 NOC used to keep a lifetime count of the traffic up and down (sadly sorely missed as great for GW planning!) for a GW under V3 it is now session specific - so e.g. power cycle the GW or is session is lost of has to restart, e.g. a TTIG checking every 24hrs and finding a new set of firmware/settings or doing a remote firmware update on others, e.g. using Balena, will reset the values to zero again… number may not match and you will need to handle potential rollover/reset to zero and start again.

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/request-gateway-traffic-over-time-period/59105)._