# Restart Dragino LT-22222-L

**URL:** <https://www.thethingsnetwork.org/forum/t/restart-dragino-lt-22222-l/66062>\
**Category:** End Devices (Nodes)\
**Tags:** dragino\
**Created:** [December 22, 2023, 6:48pm UTC](https://www.thethingsnetwork.org/forum/t/restart-dragino-lt-22222-l/66062 "2023-12-22T18:48:54Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![g\_s](https://www.thethingsnetwork.org/forum/letter_avatar_proxy/v4/letter/g/5daacb/32.png) [@g\_s](https://www.thethingsnetwork.org/forum/u/g_s)\
**Post date:** [December 22, 2023, 6:48pm UTC](https://www.thethingsnetwork.org/forum/t/restart-dragino-lt-22222-l/66062/1 "2023-12-22T18:48:54Z")

</div>

Hello,  
I have a problem with a Dragino LT-22222-L.  
Is it possible to restart the LT-22222-L using Payload Uplink?  
The analog values ​​are no longer displayed correctly.  
Thanks you for your help

Gregor

---

<div class="post-metadata">

**Author:** ![Jeff-UK](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/jeff-uk/32/35697_2.png) [@Jeff-UK](https://www.thethingsnetwork.org/forum/u/Jeff-UK)\
**Post date:** [December 22, 2023, 6:56pm UTC](https://www.thethingsnetwork.org/forum/t/restart-dragino-lt-22222-l/66062/2 "2023-12-22T18:56:13Z")

</div>

What does the documentation on the device tell you? It would be a downlink not uplink so you may have looked in wrong location if only looking at uplink data structures……

---

<div class="post-metadata">

**Author:** ![Johan\_Scheepers](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/johan_scheepers/32/48536_2.png) [@Johan\_Scheepers](https://www.thethingsnetwork.org/forum/u/Johan_Scheepers)\
**Post date:** [December 22, 2023, 8:09pm UTC](https://www.thethingsnetwork.org/forum/t/restart-dragino-lt-22222-l/66062/3 "2023-12-22T20:09:05Z")

</div>

Looked in my notes I can only see a note to either do it from the reset button or AT.

ATZ: Trig a reset of the MCU  
AT+FDR: Reset Parameters to Factory Default, Keys Reserve

---

<div class="post-metadata">

**Author:** ![fermegrover](https://www.thethingsnetwork.org/forum/letter_avatar_proxy/v4/letter/f/f08c70/32.png) [@fermegrover](https://www.thethingsnetwork.org/forum/u/fermegrover)\
**Post date:** [May 16, 2025, 12:22pm UTC](https://www.thethingsnetwork.org/forum/t/restart-dragino-lt-22222-l/66062/4 "2025-05-16T12:22:23Z")

</div>

Hello,

ive you found a solution to your problem ?  
I have the same problem with one of my LT-22222-L  
From time to time, the analog value are just wrong.  
I tried to see with a multimeter and the value are not the same as the one in TTN.  
After a reboot everything come back to normal.

Thanks,  
Sebastien
