# RN2903A AU915 experimental 1.05 class C

**URL:** <https://www.thethingsnetwork.org/forum/t/rn2903a-au915-experimental-1-05-class-c/46844>\
**Category:** End Devices (Nodes)\
**Created:** [April 19, 2021, 5:25am UTC](https://www.thethingsnetwork.org/forum/t/rn2903a-au915-experimental-1-05-class-c/46844 "2021-04-19T05:25:32Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Joey](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/joey/32/35697_2.png) [@Joey](https://www.thethingsnetwork.org/forum/u/Joey)\
**Post date:** [April 19, 2021, 5:25am UTC](https://www.thethingsnetwork.org/forum/t/rn2903a-au915-experimental-1-05-class-c/46844/1 "2021-04-19T05:25:33Z")

</div>

Anyone like to try my AU915 Class C conversion from USA → NA to AU915?  
(I just modified the uplink channels from US --\>AU915)

I don’t have access to a AU915 gateway or a Class C AU915 gateway.

The hex file needs to be programmed in to the RN2903A via the ICSP pins directly (not by UART)

Hex file here

> **[joeygold/AU915-Experimental](https://github.com/joeygold/AU915-Experimental)**
>
> Contribute to joeygold/AU915-Experimental development by creating an account on GitHub.

\*\*\*Disclaimer \*\*\*\*  
Use at own risk … etc etc experimental version only, not tested.