# RYLR896 a at commands transceiver **URL:** \ **Category:** Hardware\ **Created:** [August 5, 2018, 1:28pm UTC](https://www.thethingsnetwork.org/forum/t/rylr896-a-at-commands-transceiver/16563 "2018-08-05T13:28:33Z")\ **Posts on this page:** 12\ **Page:** 1
**Author:** ![wheelie](https://www.thethingsnetwork.org/forum/letter_avatar_proxy/v4/letter/w/b4bc9f/32.png) [@wheelie](https://www.thethingsnetwork.org/forum/u/wheelie)\ **Post date:** [August 5, 2018, 1:28pm UTC](https://www.thethingsnetwork.org/forum/t/rylr896-a-at-commands-transceiver/16563/1 "2018-08-05T13:28:34Z")
Hello there does anybody know this module and how to operate it with ttn ? It works with at commands to program it correctly but than i am lost no clue > **[REYAX TECHNOLOGY 愛坦科技 | EN](http://reyax.com/products/rylr896/)** > > 專門開發與銷售各種高品質及高可靠度之工業模組，深耕於工業電子、醫療電子、保全監控、物聯網等市場 4G/LTE, 3G, GSM/GPRS, Wi-Fi, GPS, Glonass, RFID, BLE, ZigBee > **[REYAX RYLR896 Lora module SX1276 UART 868MHz 915MHz Antenna AT command FCC NCC ...](https://www.ebay.com/itm/REYAX-RYLR896-Lora-module-SX1276-UART-Interface-868MHz-915MHz-Antenna-AT-command-/181562403752)** > > We have Lora AT COMMAND GUIDE!! The RYLR896 transceiver module feature the Lora long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimising current consumption. | eBay! ---
**Author:** ![BoRRoZ](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/borroz/32/44234_2.png) [@BoRRoZ](https://www.thethingsnetwork.org/forum/u/BoRRoZ)\ **Post date:** [August 5, 2018, 2:01pm UTC](https://www.thethingsnetwork.org/forum/t/rylr896-a-at-commands-transceiver/16563/2 "2018-08-05T14:01:07Z")
No… you can’t use this module on the TTN network. It has an UART /lora interface so you have to connect it to an MCU (arduino?) and feed it AT instructions. It then can communicate with another module… so LoRa to LoRa imho I suggest **[this](https://www.microchipdirect.com/product/RN2483)** module … ---
**Author:** ![wheelie](https://www.thethingsnetwork.org/forum/letter_avatar_proxy/v4/letter/w/b4bc9f/32.png) [@wheelie](https://www.thethingsnetwork.org/forum/u/wheelie)\ **Post date:** [August 5, 2018, 3:15pm UTC](https://www.thethingsnetwork.org/forum/t/rylr896-a-at-commands-transceiver/16563/3 "2018-08-05T15:15:48Z")
thx for the reply I will look at your suggestion ---
**Author:** ![BoRRoZ](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/borroz/32/44234_2.png) [@BoRRoZ](https://www.thethingsnetwork.org/forum/u/BoRRoZ)\ **Post date:** [August 5, 2018, 3:57pm UTC](https://www.thethingsnetwork.org/forum/t/rylr896-a-at-commands-transceiver/16563/4 "2018-08-05T15:57:59Z")
the advantage is that there are many examples and libraries available ---
**Author:** ![wheelie](https://www.thethingsnetwork.org/forum/letter_avatar_proxy/v4/letter/w/b4bc9f/32.png) [@wheelie](https://www.thethingsnetwork.org/forum/u/wheelie)\ **Post date:** [August 5, 2018, 6:38pm UTC](https://www.thethingsnetwork.org/forum/t/rylr896-a-at-commands-transceiver/16563/5 "2018-08-05T18:38:55Z")
Any idea where to buy these they seem out of stock everywhere and are going to end of live I live in the netherlands ---
**Author:** ![BoRRoZ](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/borroz/32/44234_2.png) [@BoRRoZ](https://www.thethingsnetwork.org/forum/u/BoRRoZ)\ **Post date:** [August 5, 2018, 7:44pm UTC](https://www.thethingsnetwork.org/forum/t/rylr896-a-at-commands-transceiver/16563/6 "2018-08-05T19:44:56Z")
yes they are out of stock everywhere… but you can buy a complete ‘arduino’ like module with 'onboard rn2483A you can then easy program these with arduino IDE - [https://www.thethingsnetwork.org/docs/devices/uno/](https://www.thethingsnetwork.org/docs/devices/uno/) - [http://thethingsproducts.com/#the-things-product-buy](http://thethingsproducts.com/#the-things-product-buy) ---
**Author:** ![halabre](https://www.thethingsnetwork.org/forum/letter_avatar_proxy/v4/letter/h/cdc98d/32.png) [@halabre](https://www.thethingsnetwork.org/forum/u/halabre)\ **Post date:** [October 5, 2018, 12:44pm UTC](https://www.thethingsnetwork.org/forum/t/rylr896-a-at-commands-transceiver/16563/7 "2018-10-05T12:44:16Z")
I just have 10 modules in Custom an should better deny the receive of them. The moules have FCC and we need CE conformity, That means a quarter transmitting energy. (FCC = 100mw, ce=25mw). Icould reduce the transmitters energy but then I need a new certification. ---
**Author:** ![Tix](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/tix/32/35697_2.png) [@Tix](https://www.thethingsnetwork.org/forum/u/Tix)\ **Post date:** [October 27, 2018, 12:20pm UTC](https://www.thethingsnetwork.org/forum/t/rylr896-a-at-commands-transceiver/16563/8 "2018-10-27T12:20:42Z")
Hi BoRRoZ, Hi all, could you explain why ? I can not find - in AT commands - the ability to configure “Inverted IQ” : would this be the reason for the impossibility of using it on TTN? (it’s a real question I’m a newbie !) Thanks. Tix ---
**Author:** ![BoRRoZ](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/borroz/32/44234_2.png) [@BoRRoZ](https://www.thethingsnetwork.org/forum/u/BoRRoZ)\ **Post date:** [October 27, 2018, 1:24pm UTC](https://www.thethingsnetwork.org/forum/t/rylr896-a-at-commands-transceiver/16563/9 "2018-10-27T13:24:58Z")
it has modem firmware installed so you only can send/receive data to and from an equal module through uart imho. but I haven’t seen all documentation (only available after ordering) ---
**Author:** ![Tix](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/tix/32/35697_2.png) [@Tix](https://www.thethingsnetwork.org/forum/u/Tix)\ **Post date:** [October 27, 2018, 2:01pm UTC](https://www.thethingsnetwork.org/forum/t/rylr896-a-at-commands-transceiver/16563/10 "2018-10-27T14:01:18Z")
Thanks for this return. this module will remain mysterious for me then: I will focus on the sx1276 then … 😉 ---
**Author:** ![BoRRoZ](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/borroz/32/44234_2.png) [@BoRRoZ](https://www.thethingsnetwork.org/forum/u/BoRRoZ)\ **Post date:** [October 27, 2018, 3:25pm UTC](https://www.thethingsnetwork.org/forum/t/rylr896-a-at-commands-transceiver/16563/11 "2018-10-27T15:25:47Z")
also known as RFM95 🕶 ---
**Author:** ![BoRRoZ](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/borroz/32/44234_2.png) [@BoRRoZ](https://www.thethingsnetwork.org/forum/u/BoRRoZ)\ **Post date:** [October 28, 2018, 3:28pm UTC](https://www.thethingsnetwork.org/forum/t/rylr896-a-at-commands-transceiver/16563/12 "2018-10-28T15:28:32Z")