# Semtech SX1280Z3DSFGW1 gateway **URL:** \ **Category:** Raspberry Pi Gateways\ **Tags:** guide, gateways\ **Created:** [June 23, 2021, 6:21am UTC](https://www.thethingsnetwork.org/forum/t/semtech-sx1280z3dsfgw1-gateway/49038 "2021-06-23T06:21:53Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Divakar](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/divakar/32/35697_2.png) [@Divakar](https://www.thethingsnetwork.org/forum/u/Divakar)\ **Post date:** [June 23, 2021, 6:21am UTC](https://www.thethingsnetwork.org/forum/t/semtech-sx1280z3dsfgw1-gateway/49038/1 "2021-06-23T06:21:54Z")
hi I am trying to add the semtech SX1280Z3DSFGW1 raspberry pi based gateway to ttn . I have registered but the status shows disconnected. It is 2.4GHz gateway. Can you please help ---
**Author:** ![wolfp](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/wolfp/32/45304_2.png) [@wolfp](https://www.thethingsnetwork.org/forum/u/wolfp)\ **Post date:** [June 23, 2021, 7:39am UTC](https://www.thethingsnetwork.org/forum/t/semtech-sx1280z3dsfgw1-gateway/49038/2 "2021-06-23T07:39:29Z")
The SX1280Z3DSFGW1 is a 3 channel 2.4GHz gateway. afaik this kind of gateway is supported neither by TTN V2 nor by TTN V3 (TTS CE) yet. But I am not sure. On the other hand, you can find this frequencies here already: [GitHub - TheThingsNetwork/lorawan-frequency-plans: LoRaWAN Frequency Plans for The Things Stack](https://github.com/TheThingsNetwork/lorawan-frequency-plans) ---
**Author:** ![LoRaTracker](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/loratracker/32/48502_2.png) [@LoRaTracker](https://www.thethingsnetwork.org/forum/u/LoRaTracker)\ **Post date:** [June 23, 2021, 7:43am UTC](https://www.thethingsnetwork.org/forum/t/semtech-sx1280z3dsfgw1-gateway/49038/3 "2021-06-23T07:43:53Z")
There was a discussion about this back in March; > [@SX1280 2.4GHz LoRa](https://www.thethingsnetwork.org/forum/t/sx1280-2-4ghz-lora/45163): > > Hi Guys, I am looking for help to develop code for SX1280 Nodes and Gateways for TTN. The benefits of 2.4GHz is faster data rater and no fair usage limits on broadcasting but the range seems to be slighly lower but still very acceptable. I have designed a board along the lines of the TT-GO LoRa boards which has an ESP32, header pins for OLED, GPS and BME280 and is being used on high altitude weather balloons. The boards take an RFM95 868MHz module but I have also had a few more manufactured w… ---
**Author:** ![wolfp](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/wolfp/32/45304_2.png) [@wolfp](https://www.thethingsnetwork.org/forum/u/wolfp)\ **Post date:** [June 23, 2021, 8:01am UTC](https://www.thethingsnetwork.org/forum/t/semtech-sx1280z3dsfgw1-gateway/49038/4 "2021-06-23T08:01:41Z")
I didn’t recognize until now that the 2.4 GHz band is already supported by TTS CE. Learning more and more each day. It might be interesting how LoRaWAN behaves on 2.4 GHz. ---
**Author:** ![LoRaTracker](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/loratracker/32/48502_2.png) [@LoRaTracker](https://www.thethingsnetwork.org/forum/u/LoRaTracker)\ **Post date:** [June 23, 2021, 8:24am UTC](https://www.thethingsnetwork.org/forum/t/semtech-sx1280z3dsfgw1-gateway/49038/5 "2021-06-23T08:24:09Z")
Well apart from providing a ‘Worldwide’ service, unless the fair use policy is considerably extended for TTN use on 2.4Ghz, I dont see any advantage in using 2.4Ghz. ---
**Author:** ![Baart](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/baart/32/35697_2.png) [@Baart](https://www.thethingsnetwork.org/forum/u/Baart)\ **Post date:** [June 23, 2021, 5:30pm UTC](https://www.thethingsnetwork.org/forum/t/semtech-sx1280z3dsfgw1-gateway/49038/6 "2021-06-23T17:30:42Z")
Surely with the much higher data rates 2G4 gives you, so much more data can be transmitted in the same ‘seconds per hour’ allowance therefore the advantage is a larger data transmission potential within the restrictions. But then, I’m just a dum ass ex pitman. ---
**Author:** ![LoRaTracker](https://www.thethingsnetwork.org/forum/user_avatar/www.thethingsnetwork.org/loratracker/32/48502_2.png) [@LoRaTracker](https://www.thethingsnetwork.org/forum/u/LoRaTracker)\ **Post date:** [June 23, 2021, 7:36pm UTC](https://www.thethingsnetwork.org/forum/t/semtech-sx1280z3dsfgw1-gateway/49038/7 "2021-06-23T19:36:01Z")
> [@Baart](#): > > Surely with the much higher data rates 2G4 gives you, so much more data can be transmitted in the same ‘seconds per hour’ allowance therefore the advantage is a larger data transmission potential within the restrictions. Your might be confusing the legal duty cycle limits with the amount of data that TTN is prepared to move for free. There are little to no legal duty cycle restrictions on 2.4Ghz ISM bands so the ‘seconds per hour’ legal restictions at UHF (1% or 36 seconds transmit time per hour) do not apply at 2.4Ghz. However, someone has to pay for the backend infrastructure to get the data from the Gateways to the Internet application servers. TTN, under its fair use policy, provide free acces to the backend at UHF on the basis of 30 seconds of TX air time per day which is not a lot of data for either UHF or 2.4Ghz. To get the benefit of the potential for high speed data transmission that 2.4Ghz could provide on TTN someone would need to provide substantially more backend communications for free. ---
**Author:** ![system](https://www.thethingsnetwork.org/forum/uploads/default/original/3X/6/2/6250ea44fd2b0d6259489e1a92748df681e1f970.png) [@system](https://www.thethingsnetwork.org/forum/u/system)\ **Post date:** [August 26, 2021, 7:14am UTC](https://www.thethingsnetwork.org/forum/t/semtech-sx1280z3dsfgw1-gateway/49038/8 "2021-08-26T07:14:28Z")
This topic was automatically closed 24 hours after the last reply. New replies are no longer allowed.