# Setting up TTN Server Stack behind web proxy

**URL:** <https://www.thethingsnetwork.org/forum/t/setting-up-ttn-server-stack-behind-web-proxy/9480>\
**Category:** v2 Backend\
**Created:** [September 13, 2017, 3:41pm UTC](https://www.thethingsnetwork.org/forum/t/setting-up-ttn-server-stack-behind-web-proxy/9480 "2017-09-13T15:41:42Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![hb9eyq](https://www.thethingsnetwork.org/forum/letter_avatar_proxy/v4/letter/h/8e8cbc/32.png) [@hb9eyq](https://www.thethingsnetwork.org/forum/u/hb9eyq)\
**Post date:** [September 13, 2017, 3:41pm UTC](https://www.thethingsnetwork.org/forum/t/setting-up-ttn-server-stack-behind-web-proxy/9480/1 "2017-09-13T15:41:42Z")

</div>

I’m at the step in the TTN server stack setup where I run “make test” and this is failing when mqtt tries to connect to a server on the internet. I’m inside a corporate LAN and there is a web proxy available but not sure where in the make/build process I can configure a web proxy server. I’ve used the proxy already for downloading the dependencies and I’m hoping that once I get the server stack built and installed it won’t need to connect to the outside world. So, has anyone tried to build and run the TTN server stack behind a web proxy?

-Larry

---

<div class="post-metadata">

**Author:** ![rejeeshchandran037](https://www.thethingsnetwork.org/forum/letter_avatar_proxy/v4/letter/r/e99b99/32.png) [@rejeeshchandran037](https://www.thethingsnetwork.org/forum/u/rejeeshchandran037)\
**Post date:** [June 19, 2018, 8:54am UTC](https://www.thethingsnetwork.org/forum/t/setting-up-ttn-server-stack-behind-web-proxy/9480/2 "2018-06-19T08:54:45Z")

</div>

I’m also facing the same issue.  
-Rejeesh