# Single Channel Gateway shows "not connected"

**URL:** <https://www.thethingsnetwork.org/forum/t/single-channel-gateway-shows-not-connected/6189>\
**Category:** \[obsolete\] SCPF\
**Created:** [March 22, 2017, 4:08am UTC](https://www.thethingsnetwork.org/forum/t/single-channel-gateway-shows-not-connected/6189 "2017-03-22T04:08:59Z")\
**Posts on this page:** 1\
**Showing post:** 16

<div class="post-metadata">

**Author:** ![networthings](https://www.thethingsnetwork.org/forum/letter_avatar_proxy/v4/letter/n/c4cdca/32.png) [@networthings](https://www.thethingsnetwork.org/forum/u/networthings)\
**Post date:** [March 26, 2017, 1:08am UTC](https://www.thethingsnetwork.org/forum/t/single-channel-gateway-shows-not-connected/6189/16 "2017-03-26T01:08:33Z")

</div>

So, just to clear things up: TTN no longer supports the DIY single channel gateways based on

> **[tftelkamp/single\_chan\_pkt\_fwd](https://github.com/tftelkamp/single_chan_pkt_fwd)**
>
> Single Channel LoRaWAN Gateway. Contribute to tftelkamp/single\_chan\_pkt\_fwd development by creating an account on GitHub.

Is this correct? Can someone please give a definite answer?

I have setup an RPI-based gateway, have registered it on TTN but shows up as not connected. The gateway sends status reports in the form of udp packets properly as I am able to catch them using a custom udp sink.

---

_[View the full topic](https://www.thethingsnetwork.org/forum/t/single-channel-gateway-shows-not-connected/6189)._